Roughness Length
Mostrando 1-12 de 25 artigos, teses e dissertações.
-
1. Reinforced Glass-ceramics: Parametric Inspection of Three-Dimensional Wear and Volumetric Loss after Chewing Simulation
Resumo O objetivo deste estudo foi investigar o desgaste tridimensional, perda volumétrica e rugosidade após a simulação de mastigação de dois materiais vitro-cerâmicos. Discos de dissilicato de lítio (LD, Emax CAD, Ivoclar) e silicato de lítio reforçado com zircônia (ZLS, Vita Suprinity, Vita Zhanfabrick) (n=20/g) foram confeccionados e digitaliz
Braz. Dent. J.. Publicado em: 07/10/2019
-
2. Water sorption, solubility and surface roughness of resin surface sealants
Surface sealants have been suggested as final glaze of the surface of composite restorations. However, little is known about bulk and surface properties of these materials aiming the long-term preservation of the surface integrity of these restorations. AIM: To evaluate the water sorption, solubility and surface roughness of commercial surface sealants for r
Braz. J. Oral Sci.. Publicado em: 2015-03
-
3. Fatores de degradação ambiental e elementos construtivos na avaliação e monitoramento de escadas no percurso de trilhas no parque estadual turístico do Alto Ribeira / Environmental degradation factors and constructive elements in the assessment and monitoring of stairs in the course of Alto Ribeira Touristic State Park pathways
The trail evaluation and monitoring have been undertaken in detail throughout Brazilian protected areas. However, stairs, as a component of the pathway used by the visitors, are not taken into account. This kind of infrastructure is present more frequently in steeper terrains as where Alto Ribeira Touristic State Park (PETAR) is located, the selected area fo
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 14/06/2011
-
4. Atmospheric flow measurements using the PIV and HWA techniques
Abstract: Alcântara Space Center (ASC) is the Brazilian gate to the space where rockets of different sizes are launched. At ASC there is a relative topographical variation, coastal cliff, which modifies the atmospheric boundary layer characteristics and can cause interference for operations of rockets. In the present work, a simplified model (mock-up) was s
J. Aerosp. Technol. Manag.. Publicado em: 2010-08
-
5. Influence of surface roughness and the use of new types of fiber in bearing pads of cement-based material for precast concrete connections / Influência da rugosidade superficial e o uso de novos tipos de fibras em almofadas de argamassa para ligações de concreto pré-moldado
This paper presents the study of a mortar modified to be used as a bearing pad connections between precast concrete elements. This mortar is composed of cement and sand, with the addition of styrene-butadiene latex (SB), lightweight aggregate (vermiculite) and short fibers (polypropylene, glass and PVA). Previous research showed that this composite presents
Publicado em: 2010
-
6. Fabrication and characterization of tellurite and germanate waveguides for optoelectronics applications. / Produção e caracterização de guias de onda de telureto e germanato para aplicações em optoeletrônica.
The objective of this work is the production and characterization of GeO2-PbO and TeO2-ZnO waveguides. The waveguides were produced using thin films and glasses by means of different procedures. The films were produced using the RF magnetron sputtering method and characterized by a variety of techniques. In particular, scanning electron microscopy was essent
Publicado em: 2010
-
7. Avaliação da rugosidade superficial do solo utilizando técnicas de sensoriamento remoto e análise de imagens / Evaluation of soil surface roughness using remote sensing techniques and analysis of image
To study the top-soil rugosity using the remote sense techniques, we used one area of 1.200 m, divided on three blocks with five treatments each one, where the dimensions of the parcels were from 20 m of length by 3 m of wideness and 1 m between each parcel, and each block had an area of 20 x 18 m. In every block it was made an assortment of the localization
Publicado em: 2009
-
8. Orchidaceae nativas da região central de São Paulo, Brasil : florística, interação com forófitos, proposta de novas espécies e propagação in vitro de uma espécie ameaçada de extinção / Native Orchidaceae of the central region of São Paulo, Brazil: floristic, interaction nested with host tree, new species proposed and in vitro propagation of threatened of extinction species
Aiming to know the sorts of Orchidaceae of the central region of the State of São Paulo, from 1996 and more intensively from 2005, visits were carried out in 125 forest fragments of 23 local municípios, with weekly periodicity and also, fortnightly. The collect were assistematics, being each fragment visited in the biggest number of points. The species not
Publicado em: 2009
-
9. NUMERICAL SIMULATION FOR HYDROCYCLONE DESIGNED TO HIGH OIL CONTENT APPLICATION / SIMULAÇÃO NUMÉRICA DO ESCOAMENTO EM HIDROCICLONE DESTINADO A APLICAÇÕES DE ALTO TEOR DE ÓLEO
Cyclonic separation has became more and more important during the last decades as a unit process for gas-liquid, liquid-liquid and solid-liquid separation, mostly in the Petroleum industry. The off-shore exploration¿s growth requires the development of smaller and lighter equipment. This can be achieved by cyclonic separation once centrifugal fields are sev
Publicado em: 2008
-
10. Otimização do processo de usinagem de titânio com laser pulsado de neodímio / I. A. ALMEIDA. Optimization of Titanium Machining by Pulsed Nd:Yag Laser. 2007. Thesis (Doctoral) - Tecnologia Nuclear Materiais - IPEN, Universidade de São Paulo, São Paulo, 2007.
The main goal of this work was to establish the requirements for laser processed parts to satisfy uniform surface finish, low roughness and preservation of the mechanical and functional properties of the parts. Lasers became a versatile machining tool that satisfies the modern trends in material processing. In this study, the cutting quality factors of sheet
Publicado em: 2007
-
11. Estudo do escoamento atmosférico no Centro de Lançamento de Alcântara (CLA) através de medidas de torre anemométrica e em túnel de vento
The atmospheric flow at the Alcantara Launching Center (CLA), which is localized near a 50 m cliff, was studied through (i) the analysis of wind data that were measured during the periods from 1995 to 1999 (base years) and from 2004 to 2005 (for validation), at six levels of a 70 m anemometric tower (TA), which is placed 200 m downwind of the cliff, near a r
Publicado em: 2007
-
12. Sensitivity tests and evaluation of ETA model near-surface wind forecast for nordeste region / Testes de sensibilidade e avaliação das previsões de vento do modelo ETA para região nordeste
A camada limite superficial é a parte da camada limite planetária mais influenciada pelas características da superfície da Terra. A previsão de vento nesta camada é útil em várias atividades humanas, no setor energético, no planejamento das operações de transporte aéreo, no lazer e etc. O objetivo principal desse estudo foi realizar testes de sen
Publicado em: 2007