Rotors
Mostrando 13-24 de 56 artigos, teses e dissertações.
-
13. Implementação de um quadrotor como plataforma de desenvolvimento para algoritmos de controle
Este trabalho visa a implementação de um objeto voador não-tripulado, em formato miniatura, com quatro rotores como plataforma de desenvolvimento, como parte de uma pesquisa mais abrangente. O objetivo final, ainda por ser alcançado, é chegar a um veículo voador miniatura com o máximo grau de autonomia de decisões baseadas no sensoreamento a bordo e
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/06/2010
-
14. Evaluation of 5-axis HSC dynamic behavior when milling TiAl6V4 blades
Gas combustion represents the second principal way of electricity generation due to its disposal, and smaller dimension and pollution capacity when compared with diesel engines. The conversion of natural gas in electricity is made through gas turbines, and the rotors of its compressors are components that present significant difficulty in its manufacture. Th
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2010-09
-
15. Estudo experimental de um sistema de condicionamento de ar com rotores dessecantes / EXPERIMENTAL STUDY OF AN AIR CONDITIONING SYSTEM WITH DESICCANT ROTORS
Neste trabalho é apresentado um sistema de condicionamento de ar utilizando resfriamento evaporativo acoplado a rotores dessecante, que se apresenta como uma alternativa ao sistema de refrigeração por compressão de vapor. Neste sentido, foi montado no Laboratório de Energia Solar da UFPB em João Pessoa, um protótipo em escala industrial de um sistema
Publicado em: 2010
-
16. Contribuição ao Estudo de Máquinas Rotativas na presença de Não-Linearidades / Contribution to the Study of Rotating Machines containing nonlinearities
Esta tese procura enfocar problemas relacionados a rotores inteligentes, ou seja, aqueles que são capazes de monitorar seu comportamento dinâmico, analisálo, propor soluções com certa autonomia e garantir seu funcionamento mesmo quando do aparecimento de falhas que podem comprometer seu comportamento seguro ou sua eficiência. Este trabalho, de maneira
Publicado em: 2010
-
17. Estudo da influência dos perfis de solo em sistemas rotor-mancais-fundação / Study of the influence of soil profiles on rotor-bearings-foundation systems
Nas últimas três décadas houve um desenvolvimento notável em métodos e tópicos de pesquisa a respeito da análise da dinâmica de máquinas rotativas. Um dos tópicos que têm atraído a atenção de pesquisadores é a interação de máquinas rotativas com suas estruturas de suporte. Sabe-se que a dinâmica da estrutura pode exercer um importante pape
Publicado em: 2010
-
18. Desenvolvimento de uma plataforma digital para a minimização da vibração e da ondulação de torque de um motor de relutância chaveado. / Development of a digital test setup for minimizing the torque ripple and the vibration of a swiched reluctance motor.
The initial purpose of this study is to develop a methodology of analysis of the torque ripple of a two-phase special SRM 4/2 using acceleration experimental data. In order to validate the proposed method, acceleration experimental results are presented, these results were obtained with two rotors: the reference rotor and the optimized rotor. Once the torque
Publicado em: 2009
-
19. Modeling of dynamic rotors with flexible bearings due to the use of viscoelastic materials
Nowadays rotating machines produce or absorb large amounts of power in relatively small physical packages. The fact that those machines work with large density of energy and flows is associated to the high speeds of rotation of the axis, implying high inertia loads, shaft deformations, vibrations and dynamic instabilities. Viscoelastic materials are broadly
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2008-03
-
20. Detecção da condição de rubbing em maquinas rotativas atraves da transformada Wavelet / Detection of rubbing condition on rotating machinery by wavelet transform
This work presents a detection procedure of the rubbing phenomenon and its effects in rotating machinery, applicable on the stationary and non-stationary regimes, using the Wavelet Transform as analysis tool. Firstly, the Continuous Wavelet Transform (CWT) is applied for stationary signals using the Complex Morlet wavelet as mother wavelet, for extracting of
Publicado em: 2008
-
21. Metodologia para prognosticar a reducao de temperatura do enrolamento de campo de um hidrogerador
The medium and large hydrogenerators are tailor-made in a few identical units for each particular hydroelectric power plant. So, it is not expected that we can find identical generators in different power plants. Because these hydrogenerators are not previously tested, they only present design or erecting problems during the field acceptance tests or in the
Publicado em: 2008
-
22. Análise por elementos finitos da influência de descontinuidades geométricas sobre o comportamento dinâmico de rotores flexíveis.
This work deals with a finite element analysis of the dynamic behavior of cracked flexible rotors supported by hydrodynamic journal bearing. Geometric discontinuities such as cracks, holes, undercuts, etc. can strongly affect the vibrational response of rotating systems due to the rotor local flexibility changes. The rotor model is based on the Timoshenko be
Publicado em: 2007
-
23. Aeroservoelastic analysis of the blade-sailing phenomenon in the helicopter-ship dynamic interface.
This thesis proposes a Rotary-Wing Aeroservoelasticity approach to the modeling, analysis and control of the blade-sailing phenomenon in the helicopter-ship dynamic interface (DI), based on the identification, response evaluation and control of flow and ship motion induced loads, during the engagement/disengagement flight regimes, in order to establish some
Publicado em: 2007
-
24. Atenuação de vibrações em máquinas rotativas flexíveis usando materiais viscoelásticos nos suportes / Vibration attenuation of flexible rotating machines by using viscoelastic absorbers in the supports
O objetivo deste trabalho é o estudo de uma metodologia para o controle passivo de vibração aplicada a rotores flexíveis, baseada no uso de absorvedores viscoelásticos. Desta forma é aproveitado o alto potencial que oferecem estes materiais para uso em aplicações industriais como absorvedores de ruído e vibrações. Para este fim foi projetado um si
Publicado em: 2007