Rotor Dynamics
Mostrando 13-24 de 38 artigos, teses e dissertações.
-
13. Análise aerodinâmica de turbinas eólicas Savonius empregando dinâmica dos fluidos computacional
Neste trabalho, são apresentados a discussão de conceitos fundamentais, a metodologia e os resultados de simulações numéricas baseadas no Método de Volumes Finitos do escoamento de ar sobre algumas opções de configurações de turbinas eólicas do tipo Savonius, com e sem estatores, em operação e, também, em condições estáticas, como as encontr
Publicado em: 2010
-
14. LIBRATION AND TUMBLING OF A RIGID BODY / MOVIMENTO DE ROTAÇÃO SEM RESTRIÇÃO DE UM CORPO RÍGIDO
Um problema bem conhecido da Mecânica Clássica consiste no estudo do movimento de um corpo no espaço, especialmente quando o problema é conservativo e livre de forças. Este trabalho utiliza ferramentas modernas da Dinâmica para interpretar os movimentos com grande amplitude, ultrapassando os limites de estabilidade obtidos pelo conceito de Lyapunov. O
Publicado em: 2010
-
15. Análise numérica da esteira aerodinâmica formada por uma turbina eólica com dimensionamento ótimo de Betz
A evolução do uso da energia eólica nas últimas décadas está diretamente relacionada ao desenvolvimento da tecnologia empregada na conversão e projeto das instalações. A viabilização de uma instalação eólica de grande porte depende da avaliação correta do potencial eólico. A fim de avaliar a capacidade de conversão de energia cinética do v
Publicado em: 2010
-
16. Dynamic model of axis-crank-shaft-piston from reciprocating compressor with hydrodynamic journal bearing / Dinamica de sistema rotor-biela-pistão de compressores alternativos com mancais radiais hidrodinamicos
O objetivo do presente trabalho é a modelagem dinâmica e a simulação das cargas e dos deslocamentos correntes nos mancais de um compressor alternativo. O modelo de mancal, integrado à cinética do conjunto, permite avaliar de forma precisa a influência dos pequenos movimentos dos suportes hidrodinâmicos no comportamento global do compressor. Soluçõe
Publicado em: 2009
-
17. Development of wind turbine blades by the help of computacional fluid dynamics / Desenvolvimento de pás de turbinas eólicas com auxílio da dinâmica de fluídos computacional
A necessidade de quantidades cada vez maiores de eletricidade e o efeito estufa são questões a serem resolvidas rapidamente. Assim, energias renováveis são muito mais importantes atualmente. Ao redor do mundo, a força dos ventos tem sido utilizada nas últimas décadas como parte da solução desse problema. O tamanho dos equipamentos está aumentando p
Publicado em: 2008
-
18. Identificação de parametros de mancal através de analise de correlações / Bearing parameters identification through correlation analysis
This work presents an identification methodology of stiffness and damping parameters of rolling bearings in a rotor-bearing system. The proposed method is based on Ljapunov matrix equation and state space representation. Through the definition of correlations used in matrix equation, it is possible to generate an algorithm that relates system physical parame
Publicado em: 2008
-
19. Investigation of a rotor- bearing system with bearing clearances and hertz contact by using a harmonic balance method
This work is about the steady state vibration of a rotor bearing system. The rolling bearings are modeled as two degrees of freedom elements where the kinematics of the rolling elements is considered, so are the internal clearance and the Hertz contact nonlinearity. The steady state solution of the system is achieved by the harmonic balance method, validated
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2007-03
-
20. ANÁLISE DE ACIDENTE COM ROTOR: MODELAGEM E SIMULAÇÃO / ROTOR ACCIDENT ANALYSIS: MODELLING AND SIMULATION
A problem related with an air compressor gave birth to the MSc Thesis. Problems related with rotative machines are usual in the industrial field. Difficulties come from the data gathering in order to analyze, and propose a theory of failure in order to explain and avoid the recurrence of such problem. Modelling a rotor with a Timoshenko beam element and the
Publicado em: 2007
-
21. Modal parameter identification of structures and rotating machine by adaptative filter / Identificação de parametros modais de estruturas e maquinas rotativas atraves da filtragem adaptativa
This work investigates the use of adaptive filters for parameter identification. Although adaptive algorithms are still rarely utilized in the mechanical engineering field, the recursive least square and recursive least square with QR decomposition methods can be implemented based on the second ordinary differential equations in order to characterize the mod
Publicado em: 2007
-
22. Correção de modelos Elementos Finitos Estudo de um conjunto rotor-gerador
Works developed in this project are related to the Finite Elements Models updating techniques using experimental modal data. Firstly, the Numerical and Experimental Modal Analysis techniques are presented. Models updating methods are also presented with a particular interest in iterative methods. During the bibliographical study, algorithms of parametric ide
Publicado em: 2007
-
23. Contribuição ao estudo de aerogeradores de velocidade e passo variáveis com gerador duplamente alimentado e sistema de controle difuso / Contribution to the study of fuzzy control applied to variable-speed variable-pitch wind generators with double-fed induction generator
The efficient capture of aeolic-energy occurs by means of three blades turbines with adjustable pitch-angle and angular-speed. The pitch-angle adjustment is utilized to limit the aeolic-energy capture when occur very strong winds and, the angular speed adjustment is utilized to maximize the capture of kinetic energy of weak winds. In this mode of operation t
Publicado em: 2007
-
24. Lateral dynamics and stability analysis of a gas compressor supported by hybrid and active lubricated multirecess journal bearing
Fluid film forces are generated in multirecess journal bearings by two types of lubrication mechanism: the hydrostatic lubrication in the bearing recesses and hydrodynamic lubrication in the bearing lands, when operating in rotation. The combination of both lubrication mechanism leads to hybrid journal bearings (HJB). When part of hydrostatic pressure is als
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2006-12