Rolling Metal Work
Mostrando 1-12 de 13 artigos, teses e dissertações.
-
1. An axisymmetric nodal averaged finite element
Abstract A nodal averaging technique which was earlier used for plane strain and three-dimensional problems is extended to include the axisymmetric one. Based on the virtual work principle, an expression for nodal force is found. In turn, a nodal force variation yields a stiffness matrix that proves to be non-symmetrical. But, cumbersome non-symmetrical ter
Lat. Am. j. solids struct.. Publicado em: 26/04/2018
-
2. The Effect of Casting Speed and the Fraction of Al5%Ti1%B Inoculant on the Microstructure and Mechanical Properties of the AA5052 Aluminum Alloy Produced by the Direct Chill Process
This study aimed to assess the effect of casting speed and the addition of Al5%Ti1%B inoculant in the casted AA5052 aluminum alloy plate manufactured by the Direct Chill process. The focus of this work was to decrease the rejection index of rolled products due to the occurrence of superficial flaws on plates. These defects impact directly on the production c
Mat. Res.. Publicado em: 01/02/2018
-
3. Influence of heat treatments on the microstructure and degree of sensitization of base metal and weld of AISI 430 stainless steel
ABSTRACT AISI 430 is a non-stabilized ferritic stainless steel grade with carbon content lower than 0.12%.After hot and cold rolling this material is annealed. The slow cooling after soaking at temperatures between 900oC and 1000oC promotes the formation of a high quantity of carbides and nitrides, while the rapid cooling partially suppresses the formation o
Matéria (Rio J.). Publicado em: 08/01/2018
-
4. Experimental Study of Tensile Test in Resistance Spot Welding Process
Abstract Resistance spot welding (RSW) is a widely used joining process for fabricating sheet metal assemblies in automobile industry .In comparison with other welding processes the RSW is faster and easier for automation. This process involves electrical, thermal and mechanical interactions. Resistance spot welding primarily takes place by localized melting
Lat. Am. j. solids struct.. Publicado em: 2016-06
-
5. Caracterización de semielaborados de aleaciones de titanio procesadas por extrusión y laminación perforación (proceso Mannesmann)
ABSTRACTFor the manufacture of seamless pipes and tubes are used, as raw materials, hollow bars from hot deformation processes like extrusion and rotary tube piercing (Mannesmann process). Starting from these semi-elaborated products and by means of successive cross sections reductions through tube drawing or tube rolling (cold pilgering) the requested final
Matéria (Rio J.). Publicado em: 2015-09
-
6. Análise numérica da propagação de defeitos internos na laminação transversal com cunha / Numerical analysis of internal defects propagation within cross wedge rolled parts
O processo de conformação denominado Laminação Transversal com Cunha, industrialmente conhecido como Cross Wedge Rolling (CWR), tem se destacado na indústria pela sua flexibilidade, produtividade e economia de material, porém pode apresentar defeitos internos que, em alguns casos, inviabiliza a utilização dos produtos. É um defeito de difícil avali
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/07/2012
-
7. Modeling, simulation and identification for control of tandem cold metal rolling
This paper describes a modeling procedure for tandem cold metal rolling, including the linearization step and system identification for control. The tandem cold rolling process is described by a mathematical model based on algebraic equations developed for control purposes and empirical relations. A state-space model is derived and detailed analyses in open
Mat. Res.. Publicado em: 23/10/2012
-
8. Model to characterize susceptibility to distortions by welding in aluminum plates / Proposta de modelo para caracterizar susceptibilidade a distorção devido a soldagem em chapas de aluminio
The industry interest on having a better control in the distortions provoked by welding of aluminum plates, caused by the crescent demand of this material, motivated the development of this work. In this work, it is studied the deformation caused by TIG welding in aluminum plates, alloy Al 5052, in function of the cold working degree (tempers) on the plates
Publicado em: 2009
-
9. EVALUATION OF THE MICROSTRUCTURAL AND MECHANICAL PROPERTIES OF THE GIRTH WELDING OF AN API 5L X80 STEEL TUBE BY SEMI-AUTOMATIC WELDING PROCESSES WITH GAS SHIELDING / AVALIAÇÃO DA MICROESTRUTURA E PROPRIEDADES MECÂNICAS DA SOLDAGEM CIRCUNFERENCIAL DO AÇO API 5L X80 POR PROCESSOS DE SOLDAGEM SEMI-AUTOMÁTICOS COM PROTEÇÃO GASOSA
The present work evaluates the changes in the microstructural and mechanical properties of an API 5L X80 steel tube due to the influence of heat input exerted during a welding procedure that used two sequential welding processes. The tubes were manufactured using the UOE process, from steel that was produced by controlled rolling without accelerated cooling.
Publicado em: 2007
-
10. Estudo do processo de laminação transversal com cunha (cross wedge rolling) para fabricação de eixos escalonados
ln this work tests were held with the Cross Wedge Rolling (CWR) process to analyze the influence of the process temperature, process speed and properties of the workpiece materiaJson the stability of the process. To perform these tests it was necessary to design and assemble a laboratory CWR equipment flexible enough to manufacture shafts with large ranges o
Publicado em: 2004
-
11. Analise microestrutural e das propriedades mecanicas de forjados em aço microligados obtidos a partir de pre-formas CWR
The advantages of metal forming, consisting of high productivity, low costs per part, minimum scrap material and energy consumption and improvement of overall quality, stimulate the increase of their application. Cross Wedge Rolling (CWR) is an important metal forming technique used to manufacture stepped shafts. The aims of this work were: (i) to analyze ho
Publicado em: 2004
-
12. Construção e testes de máquina de ensaio de torção plástica para levantamento do comportamento plástico de metais
A computerized prototype machine for cold torsion testing has been developed, constructed and tested in the Laboratory of Metal Forming at UDESC (University the State the Santa Catarina) - Joinville. The equipment consists of a horizontal torsion machine, employing an electric motor, a wheel, a horizontal axle and a control and acquisition data system. The g
Publicado em: 2004