Rolling Bearing
Mostrando 1-12 de 15 artigos, teses e dissertações.
-
1. Fatiga de contacto por rodadura en acero SAE 1050 recubierto con TiN, posteriormente templado
ABSTRACT The use of ceramic coatings of the nitride, carbide, or diamond type on steel substrates promotes the improvement of tribology properties. Nevertheless, high hardness gradients and adhesion problems may deteriorate the performance of these coatings when subjected to Rolling Contact Fatigue (RCF). Some studies on steels with ceramic coatings were car
Matéria (Rio J.). Publicado em: 19/07/2018
-
2. Graphite and Nickel Containing Tin Bronze-Steel Bimetals as Lead Free Bearing Materials
Ni was added into graphite-lead free tin bronze composite layers on surface of steel sheets by primary sintering mixed powders of graphite and CuSn10 with addition of a nickel nitrate and poly(vinyl alcohol) (PVA) solution in an ammonia decomposition atmosphere. The reduced Ni particles attached on the surface of graphite and CuSn10 particles help to link th
Mat. Res.. Publicado em: 20/05/2016
-
3. Utilização de medições ultrassônicas de vibração e da emissão acústica para implantação de lubrificação base-condição visando a prevenção de falhas em mancais de rolamentos
Este trabalho tem por objetivo apresentar uma técnica de identificação de falhas em mancais de rolamento até então praticamente inexistente no Brasil. Ela refere-se à mudança da tradicional lubrificação base-tempo, baseada em recomendações de fabricante e fórmulas retiradas de ábacos clássicos para a lubrificação base-condição. Mancais de r
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2011
-
4. Análise dinâmica de rolamentos de esfera / Dynamic analysis of ball bearing
Ball bearings are simple machine elements but largely used in several applications involving high velocities, high temperatures and different loads. The load model is fundamental for the ball bearing s dynamic and for this reason it is necessary to define with accuracy the mechanisms performance using analytical methods. The objective of this thesis is to an
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/08/2010
-
5. Modelo dinamico para o contato em mancais de elementos rolantes sujeito a lubrificação elastohidrodinamica / Dynamic model for the contact in rolling element bearings under elastohydrodynamic lubrification
With the need of time reduction on mechanical projects, the use of computational models for the analysis of mechanical components becomes mandatory in order to avoid excessive physical tests. Based on this assumption, is necessary to study the dynamic of previously assumed rigid components, as the rolling elements bearings, and thus knowing its influence on
Publicado em: 2009
-
6. Identificação de parametros de mancal através de analise de correlações / Bearing parameters identification through correlation analysis
This work presents an identification methodology of stiffness and damping parameters of rolling bearings in a rotor-bearing system. The proposed method is based on Ljapunov matrix equation and state space representation. Through the definition of correlations used in matrix equation, it is possible to generate an algorithm that relates system physical parame
Publicado em: 2008
-
7. Investigation of a rotor- bearing system with bearing clearances and hertz contact by using a harmonic balance method
This work is about the steady state vibration of a rotor bearing system. The rolling bearings are modeled as two degrees of freedom elements where the kinematics of the rolling elements is considered, so are the internal clearance and the Hertz contact nonlinearity. The steady state solution of the system is achieved by the harmonic balance method, validated
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2007-03
-
8. Estudo sobre a vida útil de rolamentos fixos de uma carreira de esferas. / Study about rolling bearing life of deep groove ball bearings.
O presente trabalho destina-se à discussão sobre o cálculo de vida útil de rolamentos. Mostrando o avanço do processo de cálculo ao longo das décadas até o mais alto grau de desenvolvimento atual. A preocupação do texto é demonstrar de forma simples e objetiva as divergências que existem entre a formulação teórica e a real vida dos rolamentos,
Publicado em: 2007
-
9. Use of Adaptive Filtering for Fault Detection on Ball Bearings / Utilização de filtros adaptativos para detecção de falhas em mancais de rolamentos
The analysis of vibrations constitutes one of the powerful tools destined for predictive maintenance. In this context, and with the objective of contributing to the improvement of the process of detection and diagnosis of ball bearing faults, the use of the technique of adaptive filtering applied to vibration signals is focused in this work, through the mini
Publicado em: 2006
-
10. UtilizaÃÃo de filtros adaptativos para detecÃÃo de falhas em mancais de rolamentos / Use of adaptive filtering for fault detection on ball bearings
A anÃlise de vibraÃÃes constitui uma das poderosas ferramentas destinadas à manutenÃÃo preditiva. Dentro deste contexto, e com o objetivo de contribuir para a melhora do processo de detecÃÃo e diagnÃstico de falhas em mancais de rolamentos, à focado neste trabalho o uso da tÃcnica da filtragem adaptativa aplicada a sinais vibratÃrios, atravÃs da
Publicado em: 2006
-
11. UtilizaÃÃo de filtros adaptativos para detecÃÃo de falhas em mancais de rolamentos / Use of Adaptive Filtering for Fault Detection on Ball Bearings
A anÃlise de vibraÃÃes constitui uma das poderosas ferramentas destinadas à manutenÃÃo preditiva. Dentro deste contexto, e com o objetivo de contribuir para a melhora do processo de detecÃÃo e diagnÃstico de falhas em mancais de rolamentos, à focado neste trabalho o uso da tÃcnica da filtragem adaptativa aplicada a sinais vibratÃrios, atravÃs da
Publicado em: 2006
-
12. Automatic diagnoses of rolling bearing failures based in fuzzy logic. / Diagnóstico automático de defeitos em rolamentos baseado em lógica fuzzy
This works describes two proposed methodologies for the automatic diagnoses in mechanical equipment: the fuzzy system inference and a Fuzzy C-Means based algorithm. Their performances are evaluated in an experimental case and, afterwards, also compared by the statistical alarm, a diagnostic methodology very used in industries at present. In order to do the t
Publicado em: 2005