Pullout Tests
Mostrando 1-12 de 41 artigos, teses e dissertações.
-
1. Fixation of the Anterior Ligament Graft at the Tibial Pole: Biomechanical Analysis of Three Methods
Resumo Objetivo Análise biomecânica comparativa da resistência da fixação tibial para reconstrução ligamentar com parafuso de interferência, comparada com parafuso do tipo poste com arruela, e com fixação associada entre os métodos (fixação híbrida). Métodos Foram utilizados 54 corpos de prova (tíbia suína e tendão digital bovino), que fo
Rev. bras. ortop.. Publicado em: 13/12/2019
-
2. Ballistic Tests of Alumina-UHMWPE Composites Submitted to Gamma Radiation
The energy absorption in ballistic tests of alumina-ultra high molecular weight polyethylene (UHMWPE) composites with 60, 80 and 90 wt% alumina submitted to gamma radiation doses of 25, 50 and 75 kGy was investigated. The ballistic tests were carried out at subsonic speed using a compressed air system. The results showed that the composite with 80% alumina i
Mat. Res.. Publicado em: 22/08/2019
-
3. Corrodibility and Adherence of Reinforced Concrete Rebars Electroplated with Zinc and Zinc-Nickel Alloys
Reinforced concrete is the main structural material used in the world in the construction of bridges, roads and commercial and residential buildings. One effective method for preventing corrosion of steel reinforcement is the application of galvanic coatings to the reinforcement itself. The present study evaluated the performance of three groups of reinforci
Mat. Res.. Publicado em: 15/07/2019
-
4. Numerical approach of the steel-concrete bond behavior using pull-out models
ABSTRACT This paper deals with the analysis of monotonic loading behavior in pull-out tests. The main objective is to obtain a reliable numerical model to represent the steel-concrete bond behavior using previously obtained experimental results. The tests were performed in RILEM pull-out specimen using 10 mm steel bar and concrete with compressive strength o
Matéria (Rio J.). Publicado em: 10/06/2019
-
5. Evaluation of Live Cuttings Effect on Slope Stability
ABSTRACT The aim of this work was to evaluate the development of shrub live cuttings and their effect on slope stability. Vertical in situ pullout tests and measurements of Phyllanthus sellowianus shoots and roots of 2, 4, 6, 8, 10 and 14 months old were conducted. Stability analyses were conducted for slopes with planar and curved rupture surfaces and for
Floresta Ambient.. Publicado em: 10/12/2018
-
6. Interfacial Shear Stress with Pull-out Test at Zeolite Ceramic Matrix and SS316 Single Fiber
ABSTRACT Natural zeolite ceramic is a material that can be used as bioceramics but it is fragile to crack. The weakness of ceramics can be overcome by making ceramic metals. The use of SS316 (stainless steel 316) fiber to strengthen the zeolite ceramic had been done in order to determine the interfacial relationship by using a fiber pull-out test. The conten
Matéria (Rio J.). Publicado em: 05/03/2018
-
7. Experimental Investigation of Steel-Concrete Bond for Thin Reinforcing Bars
Abstract The steel-concrete bond is a fundamental property in reinforced concrete structures. Although there are several studies on the steel-concrete bond, few of them have evaluated the performance of reinforcing bars with diameters less than 10.0 mm, which includes 5.0, 6.3, and 8.0 mm diameters, which are normally used in reinforced-concrete elements. Th
Lat. Am. j. solids struct.. Publicado em: 2017
-
8. Continuous Modeling Technique of Fiber Pullout from a Cement Matrix with Different Interface Mechanical Properties Using Finite Element Program
Abstract Fiber-matrix interface performance has a great influence on the mechanical properties of fiber reinforced composite. This influence is mainly presented during fiber pullout from the matrix. As fiber pullout process consists of fiber debonding stage and pullout stage which involve complex contact problem, numerical modeling is a best way to investiga
Lat. Am. j. solids struct.. Publicado em: 2016-10
-
9. Particleboard Panels Made from Sugarcane Bagasse: Characterization for Use in the Furniture Industry
Abstract The objective of this study was to evaluate the physical and mechanical properties of commercial panels produced with sugarcane bagasse to investigate the possibility of us for the production of furniture. We evaluated industrial MDP (Medium density particleboard) panels made of Eucalyptus and Pinus by two Brazilian companies and an industrial MDP p
Mat. Res.. Publicado em: 18/07/2016
-
10. Does MTA affect fiber post retention in repaired cervical root canal perforations?
Abstract This study evaluated the effect of mineral trioxide aggregate (MTA) on the retention of fiber posts in repaired root canal perforations. Ten-millimeter post spaces were prepared in 60 endodontically treated bovine incisors. Root perforations were created in half of the root canals in the cervical area prior to being filled with white MTA-Angelus. Fi
Braz. oral res.. Publicado em: 14/06/2016
-
11. Mechanical Characterization of Composites Manufactured by RTM Process: Effect of Fiber Content, Strain Rate and Orientation
Abstract High performance composites are exposed to severe loading and environmental conditions. In this work, mechanical properties of Fiberglass Reinforced Polyester (FRP) manufactured by resin transfer molding were evaluated. The effect of the strain rate on mechanical properties under three quasi-static testing conditions, four fiber contents and several
Lat. Am. j. solids struct.. Publicado em: 2016-02
-
12. Particleboard manufactured from Tauari (Couratari oblongifolia) wood waste using castor oil based polyurethane resin
Several wood species from the Amazon region are used in the manufacture of furniture, which leaves behind large amounts of waste (slabs, sawdust, sanding dust and bark), thus causing serious environmental impacts. An interesting alternative for the use of these wastes is the manufacture of particleboards. However, few studies have focused on the behavior of
Mat. Res.. Publicado em: 18/02/2014