Propagation Modes
Mostrando 1-12 de 61 artigos, teses e dissertações.
-
1. YIG Matrix Based Multiband Magneto-Dielectric Cylindrical Resonator Antenna
Abstract A multiband magneto-dielectric resonator antenna with cylindrical geometry is proposed in this paper. The resonator is composed of yttrium iron garnet (YIG) with chemical composition Y3Fe2(FeO4)3. The final structure is built on a low-cost FR4 dielectric substrate. With only one resonator, the antenna is able to resonate in three distinct controlled
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
2. Crack and mechanical behavior of CFRP plate-reinforced bridge roofs under high temperature with different anchoring measures
Abstract This paper investigates the crack and mechanical behavior of CFRP plate-reinforced bridge roof under high temperature with different anchoring measures. Six CFRP-reinforced test beams with different anchoring schemes were designed and constructed. The beam specimens, after the high temperature effects, were tested under four-point bending loads. The
Lat. Am. j. solids struct.. Publicado em: 22/07/2019
-
3. Propagation of vibrational modes in classical harmonic lattice with correlated disorder
Abstract: The vibrational modes with nonzero frequency are localized in harmonic lattice with disordered masses. In our work, we investigated numerically the propagation of vibrational energy in harmonic lattice with long-range correlated disordered masses, which are randomly distributed with power law spectrum S ( k ) ∝ k − α. For α = 0, a standar
An. Acad. Bras. Ciênc.. Publicado em: 01/07/2019
-
4. Experimental Study of Fatigue Crack Behavior of Rib-To-Rib Butt Welded Connections in Orthotropic Steel Decks
Abstract Rib-to-rib (RR) butt welded connections are one of the most sensitive locations for encountering fatigue failure in orthotropic steel decks (OSDs), and numerous fatigue cracks arising from these areas have been identified in existing OSD bridges. Due to dynamic factors in their service life bridges with an orthotropic steel deck (OSD) are prone to f
Lat. Am. j. solids struct.. Publicado em: 11/10/2018
-
5. All-Optical Logic Gates Devices based on SPP Coupling between Graphene Sheets
Abstract The aim of this work is to propose all-optical logic gates based on surface plasmon polaritons (SPP's) coupling among spatially separated graphene sheets. This model consists of graphene nanoribbons embedded in silica (SiO2) substrate place in a distance such that allow an efficient coupling between the plasmonic modes of the waveguides. It was nume
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2018-06
-
6. Band Structure in Carbon Nanostructure Phononic Crystals
We investigate the band structure of elastic waves propagating in carbon nanostructure phononic crystals with square, rectangular, triangular, honeycomb and Kagomé lattices. We also study the influence of carbon nanostructure cross section geometry - circular, hollow circular, square and rotated square with a 45° angle of rotation with respect to the x and
Mat. Res.. Publicado em: 27/11/2017
-
7. Complete Band Gaps in Nano-Piezoelectric Phononic Crystals
We study the band structure of elastic waves propagating in a nano-piezoelectric phononic crystal consisting of a polymeric matrix reinforced by BaTiO3 inclusions in square, rectangular, triangular, honeycomb and Kagomé lattices. We also investigate the influence of inclusion cross section geometry - circular, hollow circular, square and rotated square with
Mat. Res.. Publicado em: 30/10/2017
-
8. Stress Distribution in Graded Cellular Materials Under Dynamic Compression
Abstract Dynamic compression behaviors of density-homogeneous and density-graded irregular honeycombs are investigated using cell-based finite element models under a constant-velocity impact scenario. A method based on the cross-sectional engineering stress is developed to obtain the one-dimensional stress distribution along the loading direction in a cellul
Lat. Am. j. solids struct.. Publicado em: 2017-08
-
9. Hydrodynamics of an external-loop airlift reactor with inserted membrane
Abstract The objective of this study was to investigate the hydrodynamics of an external-loop airlift membrane reactor (ELAMR). The ELAMR was operated in two modes: without (mode A) and with bubbles in the downcomer (mode B), depending on the liquid level in the gas separator. The influence of the gas distributor’s geometry and various alcohol solutions on
Braz. J. Chem. Eng.. Publicado em: 2017-04
-
10. EDFA Design and Analysis for WDM Optical Systems Based on Modal Multiplexing
Abstract Modal multiplexing (MDM) is a core technology to allow a capacity increase in modern optical systems. However, in MDM links, the amplified WDM signal suffers not only from lack of spectral gain equalization but also from unequal modal gain. The proper design of the MDM-EDFA is crucial to provide modal gain equalization and to overcome those impairme
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-03
-
11. Propagation of waves in micropolar generalized thermoelastic materials with two temperatures bordered with layers or half-spaces of inviscid liquid
The aim of the present paper is to study the propagation of Lamb waves in micropolar generalized thermoelastic solids with two temperatures bordered with layers or half-spaces of inviscid liquid subjected to stress-free boundary conditions in the context of Green and Lindsay (G-L) theory. The secular equations for governing the symmetric and skew-symmetric l
Lat. Am. j. solids struct.. Publicado em: 2014-12
-
12. Modeling and analysis of waves in a heat conducting thermo-elastic plate of elliptical shape
Wave propagation in heat conducting thermo elastic plate of elliptical cross-section is studied using the Fourier expansion collocation method based on Suhubi's generalized theory. The equations of motion based on two-dimensional theory of elasticity is applied under the plane strain assumption of generalized thermo elastic plate of elliptical cross-sections
Lat. Am. j. solids struct.. Publicado em: 2014