Processing Elements
Mostrando 1-12 de 457 artigos, teses e dissertações.
-
1. Processamento de catalisadores gastos de unidade de hidrodessulfurização profunda (ultra-deep HDS)
PROCESSING OF SPENT ULTRA-DEEP HYDRODESULFURIZATION CATALYSTS. This work discusses the recycling of spent NiMo/Al2O3 catalysts from ultra-deep hydrodesulfurization (HDS) units. They contain a refractory coke and fouling elements from the processed feedstocks. Samples were preoxidized (600 ºC) for 12 h using a very slow heating rate to eliminate coke and vol
Química Nova. Publicado em: 2022
-
2. Using static, kinetic and metal mobility procedures to evaluate possibilities of coal waste land disposal at Moatize Mine, Mozambique
Abstract Coal mine waste rocks produced during mining and beneficiation can affect the environment due to land degradation and acid mine drainage generation. However, proper characterization and treatment of mineral processing wastes creates options for safe disposal, enhancing the environmental performance. The aim of this study was to use static and kineti
REM, Int. Eng. J.. Publicado em: 2020-12
-
3. PROCESSING OF A METAL CONCENTRATE FROM GROUND WASTE PRINTED CIRCUIT BOARDS IN ACIDIC MEDIA USING HYDROGEN PEROXIDE AS OXIDANT
The recovery of precious and base metals of a metal concentrate from ground waste printed circuit boards (PCBs) is described in detail. Samples were treated with NaOHaq. to remove the soldering mask. Experiments were performed in acidic medium (HF, H2SO4, CH3COOH or H3PO4) using H2O2 as oxidant. Base metals were leached in high yields (>99 wt.%) at ~40 ºC a
Quím. Nova. Publicado em: 20/07/2020
-
4. Multi-Element Evaluation in Black Pepper (Piper nigrum L.) According to the Processing
Black pepper is one of the most consumed spices worldwide and the evaluation of trace elements content is essential to promote consumer safety. In this study, concentrations of the elements As, Cd, Co, Cu, Fe, Mn, Mo, Ni, Pb, Se, V and Zn was determined in samples of black peppercorn (n = 25) and ground black pepper (n = 25) to verify how processing affects
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
5. ATUAÇÃO EX POST DOS DEPUTADOS BRASILEIROS EM POLÍTICA EXTERNA: Entre a critical issue perspective e a relação Executivo-Legislativo
A pergunta que se pretende responder é: os deputados federais brasileiros são omissos ao debate da política externa? Para isso, levantam-se elementos que possibilitem a compreensão sobre o interesse congressual na política externa, especificamente na tramitação dos atos internacionais. A análise compreende o período de 1988 a 2014 com foco na Câmar
Rev. bras. Ci. Soc.. Publicado em: 28/11/2019
-
6. Obtaining Composites Powders of Al2 O3 / Ni and Al2 O3 / Nb by Mechanical Alloying
Mechanical alloying (MA) can be highlighted among the various methods and powder processing forms, which consists of producing homogeneous materials from elementary powders. This process is of paramount importance as it has the ability to reduce the particle size of the powders and can often promote bonding between elements which have low interaction and wet
Mat. Res.. Publicado em: 14/10/2019
-
7. Experimental-numerical Technique to Evaluate the Thickness of TiN Thin Film
In this study, the numerical analysis of instrumented indentation testing was combined with the experimental procedure to evaluate the mechanical properties and thickness of a titanium nitride (TiN) film deposited on titanium substrate (Ti) by plasma processing. TiN film thickness is an important parameter for the surface treatment industry. In numerical ana
Mat. Res.. Publicado em: 09/09/2019
-
8. Interações ambientais e resistência física de um depósito de resíduos finos da indústria de rochas ornamentais
RESUMO Embora vários trabalhos proponham aplicações para os resíduos finos gerados no beneficiamento de rochas ornamentais, ainda não há evidências das vantagens financeiras para tal aproveitamento. Assim, a descrição dos depósitos existentes, muitos deles construídos sem triagem ou qualquer medida de proteção ambiental, torna-se imprescindível
Eng. Sanit. Ambient.. Publicado em: 15/08/2019
-
9. Os estigmas da Paixão de Cristo: dois casos de invenção ou de impostura mística
Apesar da rarefação de casos de estigmatização cristã, o interesse por esse fenômeno corporal insólito perdura. Um estudo dos casos Madeleine Lebouc e Yvonne-Aimée de Jesus revela que seus estigmas derivam ou de uma automutilação ou de uma farsa. No entanto, este não é o ponto essencial. Mais frutífera ainda mostra-se a pesquisa focada nesse mod
Rev. latinoam. psicopatol. fundam.. Publicado em: 29/07/2019
-
10. Consortium of Microalgae for Tannery Effluent Treatment
Abstract Wastewater generated in tanneries have essential elements for microalgae growth, but it has also some toxic compounds that may hinder or restrain the growth of microalgae in this environment. This work tested microalgae consortium growth originating from a deactivated effluent treatment decanter of a complete tannery (beamhouse to finished leather)
Braz. arch. biol. technol.. Publicado em: 13/06/2019
-
11. Numerical approach of the steel-concrete bond behavior using pull-out models
ABSTRACT This paper deals with the analysis of monotonic loading behavior in pull-out tests. The main objective is to obtain a reliable numerical model to represent the steel-concrete bond behavior using previously obtained experimental results. The tests were performed in RILEM pull-out specimen using 10 mm steel bar and concrete with compressive strength o
Matéria (Rio J.). Publicado em: 10/06/2019
-
12. Interpretation software applied to the evaluation of shallow seismic data processing routines in fluvial deposits
Abstract High-resolution seismic surveys have been successfully applied in the study of active sedimentary environments in shallow submerged settings, particularly improving the interpretation of sedimentary facies and architectural elements that characterize fluvial rock records. Nevertheless, specific data processing workflows to emphasize sedimentary stru
Braz. J. Geol.. Publicado em: 29/04/2019