Prestressed Beams
Mostrando 1-12 de 16 artigos, teses e dissertações.
-
1. Flexural behavior of hybrid GFRP - concrete railway sleepers
Resumo Este trabalho tem por objetivo apresentar o comportamento à flexão de vigas híbridas de GFRP (glass fiber reinforced polymer - polímero reforçado com fibra de vidro) e concreto para aplicação em dormentes ferroviários. Pretendeu-se obter dormentes com adequada resistência mecânica, não susceptíveis à corrosão, duráveis e mais leves que
Rev. IBRACON Estrut. Mater.. Publicado em: 23/09/2019
-
2. Some Aspects of Numerical Modeling of Steel-Concrete Composite Beams with Prestressed Tendons
Abstract Aspects about the numerical modeling of three-dimensional prestressed steel-concrete composite beams by using the finite element (FE) method are highlighted and commented in this work. Emphasis is given to the numerical treatment of bonded and unbonded tendons. The proposed modeling technique uses curved beam and catenary elements for simulating int
Lat. Am. j. solids struct.. Publicado em: 15/08/2019
-
3. Deflection profile analysis of beams on two-parameter elastic subgrade
A procedure involving spectral Galerkin and integral transformation methods has been developed and applied to treat the problem of the dynamic deflections of beam structure resting on bi-parametric elastic subgrade and subjected to travelling loads. The case of the response to moving constant loads of this slender member is first investigated and a closed fo
Lat. Am. j. solids struct.. Publicado em: 2013-03
-
4. Flexural motions under accelerating loads of structurally prestressed beams with general boundary conditions
The transverse vibration of a prismatic Rayleigh beam resting on elastic foundation and continuously acted upon by concentrated masses moving with arbitrarily prescribed velocity is studied. A procedure involving generalized finite integral transform, the use of the expression of the Dirac delta function in series form, a modification of the Struble's asympt
Latin American Journal of Solids and Structures. Publicado em: 2010-09
-
5. Comportamento de vigas protendidas pré-moldadas com ligações semi-rígidas.
The behaviour of prestressed precast beams is directly affected by the rotational stiffness of the end connections. Although the prestressed beam presents a linear behaviour in service, the effective behaviour of the precast beam depends on the interaction of the beam with the behaviour of its connections. The majority of the experimental investigations on s
Publicado em: 2007
-
6. Model of management for special structures : bridges and viaducts / Modelo de gestão para obras de arte especiais : pontes e viadutos
A aplicação de modelos de gestão na construção civil se mostra uma tendência, buscando minimizar riscos em empreendimentos e criar um diferencial competitivo. Neste contexto, o presente trabalho teve por objetivo desenvolver e implantar um modelo de gestão para confecção de vigas pré-moldadas, verificando possíveis ganhos em termos de custo, prazo
Publicado em: 2006
-
7. REDISTRIBUIÇÃO DE MOMENTOS EM VIGAS CONTÍNUAS EM ADUELAS PROTENDIDAS COM CABOS SINTÉTICOS EXTERNOS / MOMENT REDISTRIBUTION IN CONTINUOUS SEGMENTAL BEAMS PRESTRESSED WITH EXTERNAL SYNTHETIC TENDONS
An experimental investigation on the behavior of continuous segmental concrete beams, prestressed with external aramid tendons, was carried out. Four beams were tested; one was monolithic and the others were constructed in precast dry- jointed segments. All the beams had the same overall dimensions, with two spans and an I section 30 cm high, flange width of
Publicado em: 2003
-
8. Análise da redistribuição de esforços em vigas de concreto protendido com seções compostas. / Analysis of the force redistribution in prestressed concrete beams with composite sections.
No cálculo das perdas progressivas de protensão, decorrentes da retração e da fluência do concreto e da relaxação do aço de protensão, a norma NBR 6118 prescreve dois procedimentos simplificados, indicados para fase única de operação, ou seja, quando se consideram fases únicas de concretagem, de carregamento permanente e de protensão; e o méto
Publicado em: 2003
-
9. Web design of box-girders concrete bridges. / Dimensionamento das almas de pontes celulares.
Box-girders have received a growing attention in the field of prestressed concrete bridges. The modern trend is to build wider unicellular bridges, which leads to a considerable increase in the transverse bending moment acting mainly in their webs. These are subjected to a combination of shear force and transverse bending moments, which may reach important v
Publicado em: 2003
-
10. Contribuição ao estudo da instabilidade lateral de vigas pré-moldadas / On the lateral stability of precast concrete beams
The lateral stability of long and slender precast concrete beams requires great attention. In particular, it is important to ensure the stability of these members during transitory phases like tilting and transport, and also when the deformability of temporary supports is taken into account. The state of the art of the problem of lateral stability in precast
Publicado em: 2002
-
11. OTIMIZAÇÃO DO TRAÇADO DE CABO EM VIGAS DE CONCRETO PROTENDIDO CONSIDERANDO O ESTADO LIMITE ÚLTIMO DE FLEXÃO / OPTIMUM DESIGN OF CABLES IN PRESTRESSED CONCRETE STRUCTURES CONSIDERING THE ULTIMATE LIMIT STATE OF BENDING
The search for the optimum design, with the minimum possible material consumption and satisfying, at the same time, safety and in service conditions and also the constructive aspects, must be a central preoccupation of all engineers.Therefore the optimization of structures is such an important engineering area, which studies tools for helping the engineering
Publicado em: 2002
-
12. OPTIMUM DESIGN OF CABLES IN PRESTRESSED CONCRETE BEAMS / CONTRIBUIÇÃO AO PROJETO ÓTIMO DE CABOS EM VIGAS DE CONCRETO PROTENDIDO
O objetivo desse trabalho é apresentar uma metodologia para obtenção do traçado ótimo de cabos aderentes em vigas de concreto protendido, levando em consideração a variação das perdas por atrito ao longo dos cabos. Para atingi-lo, a formulação proposta considera os efeitos das perdas por atrito sobre as tensões e estabelece o valor custo mínimo
Publicado em: 2001