Porous Ceramics
Mostrando 1-12 de 31 artigos, teses e dissertações.
-
1. A review on the production of porous ceramics using organic and inorganic industrial waste
Abstract The use of industrial waste in compositions of ceramic masses has attracted great interest from the scientific community, as they can be considered abundant and diversified alternative sources of raw materials. At the same time, there is a growing interest in the development of porous ceramics due to their wide possibilities for use in various field
Cerâmica. Publicado em: 2022
-
2. Freeze-casting applied to ceramic materials: a short review of the influence of processing parameters
Abstract In recent years there is a high interest in the freeze-casting process because it is a simple, economical, and environmentally friendly method for obtaining highly porous materials. Most of the materials obtained by this technique have directional pore structure and anisotropic properties. However, a wide range of pore size and morphology can be obt
Cerâmica. Publicado em: 2021-03
-
3. Efeito da temperatura de sinterização e da adição de fibras poliméricas em cerâmica porosa obtida a partir de resíduos do processo Kraft
Resumo O processo Kraft gera resíduos que podem ser aplicados em diversos processos produtivos, substituindo matérias-primas comerciais, como lama de cal e areia, ricos em carbonato de cálcio e sílica, respectivamente. Neste trabalho foi realizado um estudo para obtenção de cerâmicas porosas a partir da valorização desses resíduos, utilizando-se fi
Cerâmica. Publicado em: 15/08/2019
-
4. Evaluation of mechanical properties of porous alumina ceramics obtained using rice husk as a porogenic agent
Abstract The objective of this work was to evaluate the mechanical properties of porous alumina ceramics, using the rice husk as a porogenic element. The rice husk was milled and graded in two granulometry, <65 μm and 65-150 μm, and added in a high purity calcined alumina in the proportion of 5, 15 and 30 wt%. The samples were pressed by uniaxial pressing
Cerâmica. Publicado em: 2019-01
-
5. Combined effects of melatonin and FGF-2 on mouse preosteoblast behavior within interconnected porous hydroxyapatite ceramics - in vitro analysis
ABSTRACT Objective Biocompatible materials such as interconnected porous hydroxyapatite ceramics (IP-CHA) loaded with osteogenic cells and bioactive agents are part of an evolving concept for overcoming craniofacial defects by use of artificial bone tissue regeneration. Amongst the bioactive agents, melatonin (MEL) and basic fibroblast growth factor (FGF-2
J. Appl. Oral Sci.. Publicado em: 2016-04
-
6. Production of porous ceramic materialusing different sources of alumina and calcia
ABSTRACTNumerous papers and publications report the use of microporous calcium hexaluminate (CaO.6Al2O3; CA6) as a key raw material for high temperature insulating materials. This material has unique properties with respect to chemical purity and mineral composition. Another important property of CA6 is its structure, which consists of platelet-shaped crysta
Matéria (Rio J.). Publicado em: 2015-09
-
7. Structural and fluid dynamic characterization of calcium carbonate-based porous ceramics
The aim of this work was to experimentally evaluate the use of calcium carbonate as a pore-generating agent in ceramic compositions. Compositions that contained 50% kaolin, 20% limestone, and different concentrations of quartz and feldspar were prepared by uniaxial pressing. Samples were heat-treated at a heating rate appropriate to induce calcium carbonate
Mat. Res.. Publicado em: 10/09/2013
-
8. Desenvolvimento e caracterização de microesferas de fosfato de cálcio bifásico / Development and characterization of biphasic calcium phosphate microspheres
The biphasic calcium phosphate is greatly applied in the replacement of osseous tissues and as dermal fillers due to its chemical similarity with the mineral part of bone and teeth. Due to this similarity, the calcium phosphates present, among other important properties, high biocompatibility, bioactivity and/or osteoconduction. They do not induce inflammato
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/06/2012
-
9. Estudo de cerâmicas porosas de alumina através da medida de tempos de relaxação via ressonância magnética nuclear / Characterization of porous alumina ceramics through measurement of nuclear magnetic resonance relaxation times
A medida de tempo de relaxação longitudinal (T1) e transversal (T2) de ressonância magnética nuclear (RMN) é muito utilizada para análise de meios porosos na área do petróleo. Esses tempos de relaxação estão relacionados com tamanho dos poros. As cerâmicas, dependendo da sua temperatura de sinterização, apresentam uma porosidade intrínseca, ma
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/03/2012
-
10. Influence of starch type on characteristics of porous 3Y-ZrO2 prepared from a direct consolidation casting method
Starch consolidation casting has been successfully used to produce porous ceramics with complex shapes at a relatively low producing cost. In this work, porous 3Y-ZrO2 ceramics were produced using two types of starch (corn and potato). Concentrated (50-52 vol. (%)) aqueous suspensions of the different 3Y-ZrO2-starch mixtures (i.e. starch to zirconia weight r
Materials Research. Publicado em: 01/04/2011
-
11. Influência do teor e granulometria da calcita e da temperatura de sinterização no desenvolvimento de massas cerâmicas para revestimento poroso(BIII) / Influence of particle size and content of calcite and sintering temperature on the development of porous ceramic body coating
Este trabalho objetiva estudar a influência da concentração de calcita, sua granulometria e temperatura de sinterização na obtenção de formulações para revestimento poroso que atendam as especificações da norma. Os experimentos envolveram a caracterização físicoquímica e mineralógica das matérias-primas, e ensaios mecânicos nos corpos de pr
Publicado em: 2010
-
12. Influence of drying on the characteristics of zinc oxide nanoparticles
The recent growth in the field of porous and nanometric materials prepared by non-conventional processes has stimulated the search of new applications of ZnO nanoparticulate. Zinc oxide is an interesting semiconductor material due to its application on solar cells, gas sensors, ceramics, catalysts, cosmetics and varistors. In this work, the precipitation met
Brazilian Journal of Physics. Publicado em: 2009-04