Pneumatic Controller
Mostrando 1-7 de 7 artigos, teses e dissertações.
-
1. Control of input delayed pneumatic vibration isolation table using adaptive fuzzy sliding mode
AbstractPneumatic isolators are promising candidates for increasing the quality of accurate instruments. For this purpose, higher performance of such isolators is a prerequisite. In particular, the time-delay due to the air transmission is an inherent issue with pneumatic systems, which needs to be overcome using modern control methods. In this paper an adap
Lat. Am. j. solids struct.. Publicado em: 2015-08
-
2. Avaliação de sincronização lateral entre pedestre e passarela utilizando um excitador pneumático controlado por lógica fuzzy / EVALUATION OF LATERAL SYNCHRONIZATION BETWEEN PEDESTRIANS AND FOOTBRIDGE USING A PNEUMATIC EXCITER CONTROLLED BY FUZZY LOGIC
Em passarelas de grande vão, vêm sendo observado que o tráfego de pedestres pode induzir oscilações de baixas frequências. A proximidade entre as frequências naturais da estrutura e as frequências de excitação pode resultar na ocorrência do fenômeno de ressonância, ocasionando dificuldades de uso da estrutura por receio de seu colapso por parte
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/03/2011
-
3. Arquitetura aplicada na automatização de processo de tratamento químico para preparar superfícies metálicas
A national company uses the chemical treatment to prepare surfaces in the first stage of the process which makes the coating and finishing of metal parts that are included in sets of hydraulic and/or pneumatic actuators. This process is not automated, configuring a situation that exposes operators to physical stress and unhealthy atmosphere. The continuity o
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/10/2010
-
4. Nonlinear process identification and friction quantification in control valves. / Identificação de processos não-lineares e quantificação de atrito em válvulas de controle.
The friction in control valves and inadequate controller tuning are two of the major sources of performance degradation in control loops that include such devices. As friction models are needed to diagnose abnormal valve operation or to compensate such undesirable effects, process models play an essential role in controller design. This work extends existing
Publicado em: 2009
-
5. Controlador de posição linear hidro-pneumático. / Hydro pneumatic linear position controller.
Nessa pesquisa é apresentada uma inovação tecnológica em aplicações de controle de posição em máquinas e/ou dispositivos: o Controlador de Posição Linear Hidro- Pneumático. Para os casos nos quais têm-se grandes esforços combinados com pequenos deslocamentos, normalmente esse trabalho é feito com o uso de Sistemas Servo-Hidráulcos nos quais,
Publicado em: 2008
-
6. Cascade controlled pneumatic positioning system with LuGre model based friction compensation
This paper proposes a cascade controller with friction compensation based on the LuGre model. This control is applied to a pneumatic positioning system. The cascade methodology consists of dividing the pneumatic positioning system model into two subsystems: a mechanical subsystem and a pneumatic subsystem. This division allows the introduction of friction co
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2006-03
-
7. SISTEMA DE REGULAGEM DO ESFORÃO DE CORTE EM CHAPAS METÃLICAS COM VARIAÃÃO DE ESPESSURAS / SYSTEM OF REGULATION OF THE CUT EFFORT IN METALLIC PLATES WITH VARIATION IN THICKNESSES
This work presents the project of a system that can be applied under a punching operation with different thickness metal plates and the pressure variation, knowing that is one of the most used process in the mechanical industry conformation, it reaches the most efficient results applied to the studied process. The main is to consider a electropneumatic syste
Publicado em: 2005