Plla
Mostrando 1-12 de 73 artigos, teses e dissertações.
-
1. Viability Assays of PLLA Fibrous Membranes Produced by Rotary Jet Spinning for Application in Tissue Engineering
Abstract Tissue engineering suggests different forms to reconstruct tissues and organs. One of the ways is through the use of polymeric biomaterials such as poly(L-lactic acid) (PLLA). PLLA is a recognized material in tissue engineering due to its characteristics as biocompatibility and bioresorbability. In this work PLLA fibrous membranes were produced by a
Braz. arch. biol. technol.. Publicado em: 12/08/2019
-
2. Fibrous PCL/PLLA Scaffolds Obtained by Rotary Jet Spinning and Electrospinning
Rotary jet spinning (RJS) and electrospinning are techniques to obtain fibrous scaffolds. RJS is a simple method, which fabricates three-dimensional fibers by exploiting a high-speed rotating nozzle, creating a polymer jet which stretches until solidification, and does not require high voltage. In opposite, electrospinning technique needs the presence of an
Mat. Res.. Publicado em: 15/03/2018
-
3. Síntese e biodegradação em solo de copolímeros de PET-co-PLLA
RESUMO A necessidade de reduzir a quantidade de resíduos plásticos descartada no meio ambiente revela a área de reciclagem como de grande interesse, tendo como uma das alternativas a reciclagem química do poli(tereftalato de etileno) (PET) pós-consumo com poliésteres alifáticos. Portanto, neste trabalho estudou-se a reação em massa do PET pós-consu
Matéria (Rio J.). Publicado em: 05/03/2018
-
4. Nanocristais de celulose bacteriana: da obtenção, sob diferentes condições de hidrólise, à incorporação como reforço em poli(L-ácido láctico)
RESUMO Este trabalho almejou produzir celulose bacteriana (CB), obter nanocristais de celulose bacteriana (NCCB), incorporar NCCB como reforço em poli(L-ácido láctico) (PLLA) e avaliar propriedades destes bionanocompósitos. Foram produzidas membranas de CB provenientes da bactéria Gluconacetobacter hansenii. A partir das membranas foram obtidos NCCB por
Matéria (Rio J.). Publicado em: 08/01/2018
-
5. Isothermal Crystallization Kinetics of Poly(lactic acid) Stereocomplex/Graphene Nanocomposites
The isothermal crystallization kinetics of PLA stereocomplex (scPLA) and scPLA/graphene oxide nanocomposites was investigated. scPLA was prepared by symmetric blending the two isomers, PLLA and PDLA and the scPLA nanocomposite by polymerization of the respective lactides in presence of commercial graphene oxide nanoplatelets (GNPO+) followed of blending the
Mat. Res.. Publicado em: 18/12/2017
-
6. In vitro analysis of a local polymeric device as an alternative for systemic antibiotics in Dentistry
Abstract The development of a biodegradable material with antimicrobial properties for local applications is required in the prevention and treatment of infectious diseases. The objective of this study was to produce blends of poly-L-lactide acid (PLLA) synthetic polymer associated with several antimicrobials, as an alternative in the prevention and treatmen
Braz. oral res.. Publicado em: 07/12/2017
-
7. Desenvolvimento de biocompósitos de poli(L-ácido láctico) (PLLA) com serragem de madeira
RESUMO Os polímeros petroquímicos levam centenas anos para sofrerem decomposição, acarretando em acúmulo de resíduos nos lixões e aterros sanitários. Este impacto ambiental pode ser minimizado por meio do uso de polímeros biodegradáveis. Neste contexto, este trabalho buscou uma opção “ecologicamente amigável” para a substituição de políme
Matéria (Rio J.). Publicado em: 02/10/2017
-
8. Migração extra-articular e transcutânea de parafuso de interferência de poly L,D-lactide após reconstrução do tendão poplíteo
RESUMO As reconstruções ligamentares do joelho são procedimentos ortopédicos frequentes. As fixações dos enxertos são mais comumente feitas com parafusos de interferência, metálicos ou absorvíveis. Em estudo recente, somente dez relatos sobre migração de parafusos foram encontrados; somente um deles não estava relacionado ao ligamento cruzado an
Rev. bras. ortop.. Publicado em: 2017-03
-
9. Immunohistochemical Expression of TGF-β1 and Osteonectin in engineered and Ca(OH)2-repaired human pulp tissues
Abstract The aim of the present study was to evaluate the expression of transforming growth factor-β1 (TGF-β1) and osteonectin (ON) in pulp-like tissues developed by tissue engineering and to compare it with the expression of these proteins in pulps treated with Ca(OH)2 therapy. Tooth slices were obtained from non-carious human third molars under sterile p
Braz. oral res.. Publicado em: 10/10/2016
-
10. Preparation of curcumin-loaded nanoparticles and determination of the antioxidant potential of curcumin after encapsulation
Abstract Encapsulation of bioactive compounds has been carried out to improve bioavailability and to protect them against harm conditions. However, encapsulation processes are often aggressive and it is important that encapsulated substances keep their biological activity. In this work curcumin was nanoencapsulated using dichloromethane as solvent and ultras
Polímeros. Publicado em: 04/08/2016
-
11. Application of bioabsorbable screw fixation for anterior cervical decompression and bone grafting
OBJECTIVES: To examine the application of bioabsorbable screws for anterior cervical decompression and bone grafting fixation and to study their clinical effects in the treatment of cervical spondylosis. METHODS: From March 2007 to September 2012, 56 patients, 36 males and 20 females (38-79 years old, average 58.3±9.47 years), underwent a novel operation.
Clinics. Publicado em: 2016-06
-
12. Layered double hydroxides as fillers in poly(l-lactide) nanocomposites, obtained by in situ bulk polymerization
Abstract In this study in situ bulk polymerization of L-lactide filled with layered double hydroxides (LDH) was investigated. Four different LDHs intercalated with two different organic anions (salicylate and sebacate) were synthesized and characterized. After characterization, these synthetic layered compounds were used as fillers in poly(L-lactide) (PLLA)
Polímeros. Publicado em: 31/05/2016