Pitting
Mostrando 1-12 de 137 artigos, teses e dissertações.
-
1. Numerical analysis of reinforced concrete beam subject to pitting corrosion
Resumo Neste artigo é apresentado um estudo numérico sobre os efeitos da corrosão induzida por cloreto na vida útil de elementos estruturais. Um modelo mecânico bidimensional geometricamente não linear baseado no Método dos Elementos Finitos (MEF) foi desenvolvido para a análise de estruturas de concreto armado. O estágio de iniciação da corrosão
Ambiente Construído. Publicado em: 2022
-
2. Investigation of Physicochemical Characteristics of Heavy, Medium and Blend Crude Petroleum on Corrosion Resistance of AISI 1020 Carbon Steel
This work investigates the influence of the physicochemical characteristics of heavy (17.5 °API), medium (28.3 °API) and blend (50% heavy + 50% medium) crude petroleum on corrosion of AISI 1020 carbon steel at 25.0 ± 1.0°C. The corrosion resistance of steel was analyzed by electrochemical impedance spectroscopy, potentiodynamic polarization, and scanning
Mat. Res.. Publicado em: 05/12/2019
-
3. Corrosion Resistance of TiO2-ZrO2 Nanocomposite Thin Films Spin Coated on AISI 304 Stainless Steel in 3.5 wt. % NaCl Solution
Utilizing high chromium and nickel content in AISI 304 steel confers its good corrosion resistance. However, the high content of chromium and nickel increases the steel susceptibility to corrosion caused by the high concentration of chlorine. Consequently, the electrochemical and mechanical performance of the steel degrades. In this study, the effect of addi
Mat. Res.. Publicado em: 02/12/2019
-
4. Influence of Molybdenum on Microstructure and Pitting Corrosion Behavior of Solution-Treated Duplex Stainless Steel in a Lithium Chloride Solution
With technological advances in the several areas of knowledge, the constant search for materials with characteristics that meet certain applications has been growing, especially in the chemical and petrochemical industries, where materials capable of withstanding the conditions of corrosion in aggressive environments are required. The aim of this paper was t
Mat. Res.. Publicado em: 24/10/2019
-
5. Influence of Nb Content on Sensitization and Pitting Corrosion of Welded AISI 430 Ferritic Stainless Steel
Resumo Neste trabalho, o efeito da adição de Nb na sensitização e corrosão por pite de aço inoxidável ferrítico AISI 430 submetido à soldagem TIG foi investigado por caracterização microestrutural e técnicas eletroquímicas. As três regiões distintas do processo de soldagem, zona fundida, zona termicamente afetada e metal de base do aço AISI
Soldag. insp.. Publicado em: 07/10/2019
-
6. Effect of Sigma Phase Precipitated at 850 °C on Corrosion Behaviour of UNS S82441 Duplex Stainless Steel
ABSTRACT Duplex stainless steels (DSS) are alloys with binary microstructure consisting of ferrite (δ) and austenite (γ), combining high mechanical properties and corrosion resistance by pitting and stress corrosion, due to the two phases austenite/ferrite. However, the formation of secondary and intermetallic phases, during solidification processes, heat
Matéria (Rio J.). Publicado em: 16/09/2019
-
7. Corrosion Behavior of 316L and Alloy 182 Dissimilar Weld Joint with Post-Weld Heat Treatment
ABSTRACT Austenitic stainless steel and nickel-base alloys welds are widely used in nuclear reactor components, plants of energy generation, chemical, and petrochemical industries, due to their high corrosion resistance. The post weld heat treatments (PWHT) are generally applied to welding in order to relieve the welding residual stress. The aim of this work
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. Avaliação da susceptibilidade à corrosão de um aço inoxidável AISI 316L submetido à simulação térmica com o uso da Gleeble
RESUMO Este trabalho teve como finalidade avaliar a influência do tamanho médio dos grãos na susceptibilidade à corrosão do aço inoxidável austenítico AISI 316L, cujo material é bastante utilizado em juntas soldadas, em temperatura ambiente e em baixíssimas temperaturas (condições criogênicas) por apresentar excelente resistência à corrosão e
Matéria (Rio J.). Publicado em: 16/09/2019
-
9. Corrosion Behavior of Austenitic Stainless Steels in CO2-Saturated Synthetic Oil Field Formation Water
The corrosion behavior of austenitic and superaustenitic stainless steels was investigated in carbon dioxide-saturated synthetic oil field formation water using cyclic polarization tests. In order to measure the effect of carbon dioxide pressure, the samples were also exposed in a pressurized medium containing carbon dioxide and synthetic air. For this purpo
Mat. Res.. Publicado em: 05/09/2019
-
10. The Effects of pH Values on Functional Mechanisms of Nitrite Anions for Q235 Carbon Steels in 0.01 mol L-1 NaNO2-HCl Solutions
For Q235 carbon steels in 0.01 mol L-1 NaNO2-HCl solutions with different pH values, the effects of pH values on the functional mechanisms of nitrite anions (NO2-) were studied. In the pH 1 and pH 2 solutions, the Q235 steels showed the electrochemical behavior of activation, and uniform corrosion (UC) was the main corrosion type on the Q235 surface. The pre
J. Braz. Chem. Soc.. Publicado em: 12/08/2019
-
11. Corrosion and Micro-abrasive Wear Behaviour of 2524-T3 Aluminium Alloy with PAni-NPs/PSS LbL Coating
In this paper, we present an alternative method to obtain thin films for coating protection on the surface of the AA2524-T3 Al-alloy by using the Layer-by-Layer (LbL) technique. The LbL films were fabricated by alternated immersion of the Al-alloy into a poly(styrene sulfonate) (PSS) and polyaniline nanoparticles (PAni-NPs) solutions, obtaining a PAni-NPs/PS
Mat. Res.. Publicado em: 06/06/2019
-
12. Uso de técnicas electroquímicas para determinar la resistencia a la corrosión localizada de un acero inoxidable súper dúplex UNS S-32760
ABSTRACT Super duplex stainless steel UNS S-32760 is one of the most commonly used alloys in several industrial applications, due to its high corrosion resistance. However, this characteristic is affected when the alloy is exposed to aggressive environments. In this work, the effect of temperature on the critical potential of super duplex stainless steel was
Matéria (Rio J.). Publicado em: 20/05/2019