Physicalmechanical Properties
Mostrando 1-12 de 50 artigos, teses e dissertações.
-
1. Physical-mechanical behavior of alkali-activated materials produced by the one-part method based on fly ash and rice husk ash
Abstract The study on the physical-mechanical properties of alkali-activated materials (AAM) produced by the ‘one-part’ method was carried out. For this, residues such as fly ash and rice husk ash (RHA) were used. The alkaline activator (NaOH) was calcined together with RHA for 2 h at 750 °C. Dry mixes were prepared by replacing fly ash with 10%, 20%, a
Cerâmica. Publicado em: 2022
-
2. Manufacturing and characterization of sustainable macroporous glass foams
Abstract This work produced glass foams from soda-lime glass bottles, bentonite, and alumina by the replica method. Compositions with different contents of bentonite (5, 10, 15, and 20 wt%) were prepared and heat-treated at 800 °C. In the alumina-added compositions, 50 wt% of the bentonite was replaced by the alumina. The influences of the content of benton
Cerâmica. Publicado em: 2022
-
3. Physical-Mechanical Properties of Bulk Fill Composites Submitted to Biodegradation by Streptococcus mutans
Resumo O objetivo deste estudo foi avaliar a influência do biofilme de S. mutans na rugosidade (Ra), brilho (GU), dureza superficial (KHN) e resistência à flexão (FS) de compósitos de Bulk Fill de alta viscosidade. Foram utilizados Filtek Bulk Fill (FBF), Tetric N Ceram Bulk Fill (TNC), X-tra fil Bulk Fill (XF) e Filtek Z350 (FZ). Dez discos de cada com
Braz. Dent. J.. Publicado em: 2020-08
-
4. Physical-Mechanical Properties of a Resin-Modified Calcium Silicate Material for Pulp Capping
Resumo O objetivo deste estudo foi investigar e comparar as propriedades físico-mecânicas de um material à base de silicato de cálcio modificado por resina (TheraCal LC) ao MTA (Angelus) e um cimento de hidróxido de cálcio (Dycal). Espécimes de cada material (n=12) foram fabricados em moldes de Teflon (3,58 mm x 3 mm) e medidos antes e após imersão
Braz. Dent. J.. Publicado em: 2020-06
-
5. Geomechanical characterization of carbonates of the Sete Lagoas Formation (Bambuí Group)
Abstract The geomechanical properties of rock masses must be identified to assess their quality and employability; however, the methodologies may differ depending on the lithotype and analytical purposes. The present study aimed to estimate the not-well-known physical-mechanical properties of three types of carbonate rocks (calcarenite, calcilutite, and marb
REM, Int. Eng. J.. Publicado em: 2020-03
-
6. Influence of treatment with water-soluble CCB preservative on the physical-mechanical properties of brazilian tropical timber
This aim of this work is to present an analysis of the influence of impregnation against biological demand, realized with saline solution of CCB (Chromated Copper Borate preservative) by vacuum-pressure process, on physical-mechanical properties of tropical wood species Simarouba sp., Cedrelinga catenaeformis and Erisma uncinatum Warm. In theory, such proces
Mat. Res.. Publicado em: 13/01/2020
-
7. THERMAL MODIFICATION OF SUGARCANE WASTE AND BAMBOO PARTICLES FOR THE MANUFACTURE OF PARTICLEBOARDS
RESUMO A modificação térmica de partículas de painéis constituídos de resíduos agroflorestais e industriais pode incorporar melhorias na estabilidade dimensional (variação na espessura) e reduzir a utilização de produtos químicos, que podem onerar o processo ou serem nocivos ao homem e ao meio ambiente. Assim, o objetivo da pesquisa foi avaliar o
Rev. Árvore. Publicado em: 23/09/2019
-
8. Physical-mechanical Properties of Plywood Produced With Acrocarpus fraxinifolius and Pinus oocarpa
ABSTRACT The present study has the objective of evaluating the physical-mechanical properties of plywood produced with Acrocarpus fraxinifolius wood, as well as the effect of combining their veneer with Pinus veneer. The wood of Acrocarpus fraxinifolius and Pinus oocarpa were used in the production of the panels. The plywood was produced with five veneers; t
Floresta Ambient.. Publicado em: 05/09/2019
-
9. Propriedades das argamassas de revestimento contendo resíduo proveniente da produção do TiO2 (MNR)
Resumo Nesse trabalho avaliou-se a influência da adição do resíduo da produção de TiO2, minério não reagido (MNR), nas propriedades de argamassas de revestimento. Para isso, avaliaram-se as propriedades de argamassas mistas (cimento Portland branco e cal) com adições de 0%, 5%, 10% e 15% de MNR, em relação à massa do cimento. As argamassas foram
Cerâmica. Publicado em: 15/08/2019
-
10. Retarding effect of grinding dust and its influence on the physical-mechanical and rheological properties of cementitious matrices
Resumo O presente estudo avaliou a viabilidade da utilização do pó de retífica (PR), resíduo gerado na produção de revestimentos de discos de embreagem, como aditivo retardador em matrizes cimentícias. Para isso, o PR foi adicionado nos teores de 5%, 10% e 15%, em relação à massa de cimento, e avaliou-se o efeito desta adição no tempo de pega, p
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
11. Depth effect on sandstone strength properties
Abstract The present article focuses on the study of different physical-mechanical parameters; it presents the results of a preliminary investigation aimed at experimental characterization. To simulate the mechanical behavior of the rock, a reference material needs to be chosen. The reference material selected is Sandstone, which is commonly used in this fie
REM, Int. Eng. J.. Publicado em: 2019-06
-
12. Production of Structural Particleboard of Mimosa Scabrella Benth With Lignin Phenol-formaldehyde Resin
RESUMO O objetivo do trabalho foi avaliar a viabilidade de uso da resina lignina-fenol-formaldeído na produção de painel aglomerado estrutural de Mimosa scabrella Benth (bracatinga). Os painéis foram produzidos com massa específica nominal de 750 kg.m-3 e 950 kg.m-3, 10 e 12% de resina fenol-formaldeído e lignina-fenol-formaldeído, e 10 e 12 minutos d
Floresta Ambient.. Publicado em: 30/05/2019