Physical Vapor Deposition
Mostrando 1-12 de 37 artigos, teses e dissertações.
-
1. Metallic Phthalocyanines: impact of the film deposition method on its supramolecular arrangement and sensor performance
Abstract This short review gives a concise overview of the impact of deposition methods on the supramolecular arrangement of metallic phthalocyanine films and their applications. Primarily, an introduction about the possible phthalocyanine molecular structures and derivatives obtained from modification on the phthalocyanine rings was presented. The possibili
An. Acad. Bras. Ciênc.. Publicado em: 25/11/2019
-
2. An Investigation on Surface Roughness and Tool Wear in Turning Operation of Inconel 718
ABSTRACT: This paper investigates the influences of three different input parameters, such as feed rate, insert nose radius, and insert coating methods, in the turning operation of Inconel 718. The coating methods were selected as medium temperature chemical vapor deposition (MT-CVD) and physical vapor deposition (PVD) and in addition to coating methods, the
J. Aerosp. Technol. Manag.. Publicado em: 25/02/2019
-
3. Dependence of Wear and Mechanical Behavior of Nitrocarburized/CrN/DLC Layer on Film Thickness
Diamond-like carbon (DLC) films are amorphous metastable carbon form that provide interesting mechanical and tribological properties. The role of film thickness influence upon wear and mechanical properties is of interest and not yet fully reported. In this study, two samples of previously plasma nitrocarburized, quenched and tempered H13 steel were duplex t
Mat. Res.. Publicado em: 31/01/2019
-
4. Extensión de durabilidad de pistones de bombas de fractura hidráulica mediante el empleo de tecnología de nitruración por plasma y PVD
ABSTRACT Hydraulic stimulation technique consists of "fracturing" the formation (rock reservoirs) through pumping a fracturing fluid downhole. This operation is performed by using hydraulic fracturing pumps. The pistons of these pumps are mechanical components performing the intake and compressing fracture fluid by reciprocating action. During this alternati
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. On the Effect of Aluminum on the Microstructure and Mechanical Properties of CrN Coatings deposited by HiPIMS
Hard coatings are a suitable solution for increasing the lifetime of tools and components employed in different industrial applications. Coatings of transition metal nitrides have great use for tribological applications due to due to their unique mechanical properties. Although widely employed, current deposition methods such as cathodic arc evaporation prod
Mat. Res.. Publicado em: 12/04/2018
-
6. Resistivity Reduction of Nanostructured Undoped Zinc Oxide thin Films for Ag/ZnO Bilayers Using APCVD and Sputtering Techniques
Nanostructured undoped zinc oxide (ZnO) thin films were deposited using atmospheric pressure chemical vapor deposition (APCVD) on glass substrates using zinc acetate dehydrate [C4H6O4Zn·2H2O, ZnAc] in less than 2 minutes for each sample. In order to reduce the resistivity of ZnO films, a very thin layer of Ag was deposited on top of the films via the sputte
Mat. Res.. Publicado em: 15/03/2018
-
7. Determination of Film Thickness Through Simulation of Vickers Hardness Testing
In recent decades, changes in the surface properties of materials have been used to improve their tribology characteristics. However, this improvement depends on the process, treatment time and, essentially, the thickness of this surface film layer. Physical vapor deposition (PVD) has been used to increase the surface hardness of metallic materials. The aim
Mat. Res.. Publicado em: 13/04/2017
-
8. Physical Vapor Deposited Films of a Perylene Derivative: Supramolecular Arrangement and Thermal Stability
The analysis of supramolecular arrangement is essential to understand the role of this key factor on the optical and electrical properties of organic thin films. In this work, thin solid films of bis(phenethylimido) perylene (PhPTCD) fabricated using physical vapor deposition (PVD) technique (thermal evaporation), deposited simultaneously onto different subs
Mat. Res.. Publicado em: 23/03/2017
-
9. Thick CrN/NbN Multilayer Coating Deposited by Cathodic Arc Technique
The production of tribological nanoscale multilayer CrN/NbN coatings up to 6 µm thick by Sputtering/HIPIMS has been reported in literature. However, high demanding applications, such as internal combustion engine parts, need thicker coatings (>30 µm). The production of such parts by sputtering would be economically restrictive due to low deposition rates.
Mat. Res.. Publicado em: 19/12/2016
-
10. Improving the Electroluminescence of [Zn(salophen)(OH2)] in Polyfluorene-Based Light-Emitting Diode: The Role of Energy Transfer and Charge Recombination
Combining two or more different compounds with advantageous properties has been a useful and straightforward strategy in achieving a new class of materials with improved physical properties. This has been especially true for electronic polymers, whose optoelectronic properties can be completely tuned, and even improved, when mixed with other polymeric materi
J. Braz. Chem. Soc.. Publicado em: 2016-02
-
11. Supramolecular Architecture and Electrical Properties of a Perylene Derivative in Physical Vapor Deposited Films
The supramolecular structure of organic thin films is a key factor in their optical and electrical properties and, consequently, in the technological applications involving organic electronic. Here, thin films of a perylene derivative, the bis butylimido perylene (BuPTCD), were produced by vacuum thermal evaporation (PVD, physical vapor deposition). The main
Mat. Res.. Publicado em: 17/11/2015
-
12. Obtenção de revestimentos de nitreto de titânio por meio de deposição física de vapores em ligas de titânio obtidas por metalurgia do pó
A elevada relação resistência mecânica/peso, alta resistência à corrosão e biocompatibilidade do titânio e suas ligas apresentam-se de grande importância para as indústrias aeroespacial, química, naval e de implantes. Todavia, a produção e processamento do titânio apresentam custos elevados em função de dificuldades oriundas de sua elevada re
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/09/2011