Phb
Mostrando 1-12 de 274 artigos, teses e dissertações.
-
1. [Parâmetros bioquímicos e hormonais de caprinos consumindo água com diferentes níveis de salinidade mantidos em ambiente controlado]
RESUMO O objetivo do trabalho foi avaliar as variáveis bioquímicas e hormonais de caprinos das raças Moxotó e Canindé, submetidos a duas temperaturas (26,0±0,6ºC e 32,0±1,2ºC), termoneutra e acima da zona de conforto térmico, respectivamente), consumindo água com três níveis de salinidade (1,0, 6,0 e 12,0dSm-1), utilizando-se 36 animais (18 de c
Arq. Bras. Med. Vet. Zootec.. Publicado em: 2021-08
-
2. Preparation of Poly(3-hydroxybutyrate-b-ε-caprolactone) by Reactive Extrusion and Production of Electrospun Fibrous Mats
Poly(3-hydroxybutyrate) (PHB) has been proposed to be a potential candidate to be used as biomaterial. However, its poor processability, high brittleness and rigidity have limited its applicability. Transesterification reactions with poly(ε-caprolactone) (PCL), one of the most promising biomedical materials, emerge as an attractive alternative to improve it
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
3. Effect of norbixin-based poly(hydroxybutyrate) membranes on the tendon repair process after tenotomy in rats
Abstract Purpose: To determine the efficacy of norbixin-based poly(hydroxybutyrate) (PHB) membranes for Achilles tendon repair. Methods: Thirty rats were submitted to total tenotomy surgery of the right Achilles tendon and divided into two groups (control and membrane; n = 15 each), which were further subdivided into three subgroups (days 7, 14, and 21; n
Acta Cir. Bras.. Publicado em: 13/01/2020
-
4. Mass Variation Rate, in Acidic Environment, of Polyhydroxybutyrate and Chitosan matrices with Potential Application as Controlled Drug Delivery System
Polymers such as the biocompatible polyhydroxybutyrate (PHB) and the polysaccharide chitosan (Chi), a pH-sensitive polymer, have been studied for drug delivery applications and scaffolds production. In this work, matrices of PHB and Chi were produced by compression molding (SPHB-Chi) and loaded with a broad-spectrum biocide chlorhexidine (CHX) (SPHB-Chi-CHX)
Mat. Res.. Publicado em: 30/09/2019
-
5. Comparison of acid and enzymatic hydrolysis of pectin, as inexpensive source to cell growth of Cupriavidus necator
Abstract: The present work investigated what the appropriate methods of hydrolysis of pectin for reducing compounds (RCs) production, employed as a substrate for cell growth of Cupriavidus necator. This microorganism has great importance industrial, because besides potential single cell protein (SCP), is the most studied microorganism for production of polyh
An. Acad. Bras. Ciênc.. Publicado em: 25/04/2019
-
6. Non-isothermal melt crystallization kinetics of poly(3-hydroxybutyrate), poly(butylene adipate-co-terephthalate) and its mixture
Abstract Nonisothermal crystallization and melting of the biodegradable thermoplastics poly(3-hydroxybutyrate) (PHB), poly(butylene adipate-co-terephthalate) (PBAT), and a 1:1 PHB/PBAT blend were investigated by differential scanning calorimetry (DSC) over an extensive range of heating/cooling rates (2 to 64°C/min). The different phase transition behavior
Polímeros. Publicado em: 18/03/2019
-
7. Desenvolvimento e caracterização de biocompósitos de polihidroxibutirato e fibra de bananeira
RESUMO O PHB (Poli-3-hidroxibutirato) é um termoplástico biodegradável sintetizado por fermentaçãosubmersa a partir de matérias-primas renováveis. É um poliéster composto por elastômeros e termoplásticos lineares, cujas propriedades são de grande interesse científico e tecnológico, é um polímero altamente cristalino muito rígido e frágil, c
Matéria (Rio J.). Publicado em: 06/12/2018
-
8. Preparação de membranas de PHB por eletrofiação e caracterização para aplicações em engenharia tecidual
RESUMO Este trabalho tem como objetivo a preparação de mantas compostas por fibras do polímero biodegradável poli(3-hidroxibutirato) -(PHB) por meio da técnica de eletrofiação. Obtiveram-se mantas sob diferentes condições, variando-se o fluxo, a temperatura da solução, a tensão aplicada e a adição de um agente surfactante. O material obtido foi
Matéria (Rio J.). Publicado em: 06/12/2018
-
9. Efeito das variáveis reacionais na síntese de um polímero biodegradável funcionalizado: PCL-g-MA
RESUMO A Poli(ɛ-caprolactona) (PCL) é um termoplástico sintético biodegradável que tem sido foco de estudos em novos “polímeros verdes”, devido principalmente as suas boas propriedades mecânicas, o que a torna competitiva com outros polímeros convencionais e biopolímeros, tais como: Poli(ácido lático) (PLA), Poli(hidroxibutirato) (PHB). O obje
Matéria (Rio J.). Publicado em: 06/12/2018
-
10. Effect of heat cycling on melting and crystallization of PHB/TiO2 compounds
Abstract Compounds of poly(3-hydroxybutyrate) (PHB) and titanium dioxide (TiO2) with filler content between 1% and 10% were prepared in a laboratory internal mixer. The effect of heating and cooling rates on the crystallization and melting of PHB/TiO2 compounds was investigated by differential scanning calorimetry (DSC). Melt and cold crystallization rates
Polímeros. Publicado em: 21/05/2018
-
11. Biodegradation of Poly (3-hydroxybutyrate) /Eggshellsystems
In this work, biocomposites of poly (3-hydroxybutyrate) (PHB) / calcium carbonate from Rhea Americana eggshells were prepared and the effects of the addition of the inorganic filler in the polymeric matrix were assessed. The residue (powder) of the eggshell calcined at 400 ºC or in natura was inserted into a PHB solution for preparation of films via casting
Mat. Res.. Publicado em: 21/05/2018
-
12. Produção de compósito de poli-hidroxibutirato e hidroxiapatita (PHB/HA) para utilização como biomaterial
Resumo Materiais compósitos com matriz de poli-hidroxibutirato e material de reforço de hidroxiapatita (PHB/HA) foram produzidos por moldagem a partir de prensagem em 100 MPa e 165 °C durante 30 min. A quantidade de reforço variou de 0 a 20% em massa para avaliar o efeito das partículas de HA nas propriedades mecânicas e na bioatividade dos compósitos
Cerâmica. Publicado em: 2017-12