Phase Stability
Mostrando 13-24 de 817 artigos, teses e dissertações.
-
13. Characterization and Comparative Analysis of Corrosion Resistance of 4 High Manganese Steels Models in Aqueous Solution of NaCl
The liquefied natural gas volumes that currently need to be stored and/or transported require engineering to consistently develop materials that combine high mechanical strength and low manufacturing costs. The present work brings the study of four models of high manganese steels (non-commercials), to demonstrate the feasibility of being used in the petroche
Mat. Res.. Publicado em: 09/12/2019
-
14. Corrosion Resistance of Cu-Alloyed Precipitation Hardenable Duplex Stainless Steel ASTM A890 Grade 1B
Duplex stainless steels (DSS) are corrosion resistant alloys largely used in chemical and petrochemical industries. Some commercial DSS contain 0.5-1.0% copper addition to improve the corrosion resistance by reducing the corrosion rate in non-oxidizing environments. Higher copper addition (≥ 2%) can also hard by precipitation, especially when fine copper p
Mat. Res.. Publicado em: 07/11/2019
-
15. Postharvest conservation of ‘Avalanche’ cut roses with hydroxypropyl methylcellulose-beeswax natural coating
RESUMO O uso de recobrimentos na pós-colheita de frutas e hortaliças é objeto de estudos há vários anos pela sua capacidade de prolongar a vida de prateleira de vegetais. No entanto, pouco se sabe acerca do uso destes recobrimentos na conservação pós-colheita de flores de corte. O objetivo deste trabalho foi avaliar o efeito de diferentes concentraç
Ciênc. agrotec.. Publicado em: 07/11/2019
-
16. Synthesis of Hybrid Monolithic Columns Using a Click Chemistry Reaction for Application in Capillary Liquid Chromatography
Hybrid monolithic columns present characteristics of both silica and organic monoliths, such as good mechanical properties, wide pH tolerance, high permeability and stability and little swelling or shrinkage. A common way to prepare this type of material is by using alkoxysilanes and organic monomers via the sol-gel process and click chemistry reactions. In
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
17. Nanoemulsion containing caffeine for cellulite treatment: characterization and in vitro evaluation
The Ginoide Hydrolipodystrophy (GHLD), commonly known as cellulite, occurs in 80-90% of the female population after the puberty period and comes from a metabolic modification in the cutaneous adipose tissue. Caffeine has been used in topical formulations due to its lipolytic action. We studied a nanoemulsion (F3) containing caffeine with two surfactants (ole
Braz. J. Pharm. Sci.. Publicado em: 24/10/2019
-
18. Thermal Stability and Kinetic of Decomposition of Mono- and Dicationic Imidazolium-Based Ionic Liquids
Phase transitions, thermal stability, thermokinetics and activation parameters of degradation reaction of the dicationic ionic liquids (ILs), 1,n-bis(3-methylimidazolium-1-yl)alkane ([BisAlk(MIM)2][2Br]) and monocationic ILs, 1-(3-methylimidazolium-1-yl)alkane ([Alk(MIM)][Br]), where Alk = Dec, DoDec, TetDec, (decane, dodecane, tetradecane) were evaluated. T
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
19. Molten Salt Synthesis of Bi2WO6 Powders and its Visible-Light Photocatalytic Activity
Bi2WO6 powders were synthesized by the molten salt method at 250-350 ºC using the mixture of Bi(NO3)3·5H2O and Na2WO4·2H2O as a precursor, and the mixture of LiNO3 and NaNO3 with a molar ratio of 27:33 as a molten salt, respectively. The effects of temperature and salt amount on the phase composition, morphology and photocatalytic activity under the visib
Mat. Res.. Publicado em: 21/10/2019
-
20. LC-UV method to assay raloxifene hydrochloride in rat plasma and its application to a pharmacokinetic study
A specific, precise, and accurate LC-UV method was developed and validated to assay raloxifene hydrochloride in rat plasma. Raloxifene was analyzed after liquid-liquid extraction and quantified by reversed phase liquid chromatography (C18 column) using acetonitrile and ammonium acetate buffer 0.05 M (pH 4.0) as mobile phase at a flow rate of 1 mL.min-1 and U
Braz. J. Pharm. Sci.. Publicado em: 30/09/2019
-
21. ALKALINE PROTEASE PRODUCTION BY Bacillus licheniformis LBA 46 IN A BENCH REACTOR: EFFECT OF TEMPERATURE AND AGITATION
Abstract The production of protease from Bacillus licheniformis LBA 46 was studied in a 6 L reactor using the experimental design tool. The higher protease production was obtained in the exponential phase of growth reaching maximum activity (~3,000 U/mL) after 48 h of fermentation at 30 ºC and 300 rpm in a culture medium made of agroindustrial by-products.
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
22. Efeito dos ácidos itacônico e fumárico na copolimerização em emulsão do estireno com acrilato de n-butila para produção de argamassa cimentícia
RESUMO Monômeros carboxílicos são frequentemente empregados em formulações de polímeros obtidos via polimerização em emulsão e miniemulsão visando melhorar ás propriedades de aplicação dos látexes. O objetivo deste trabalho foi avaliar o efeito dos ácidos itacônico IAI), fumárico (AF) e metacrílico (AMA) na copolimerização em emulsão do
Matéria (Rio J.). Publicado em: 16/09/2019
-
23. Síntese e caracterização de cobaltita de níquel (NiCo2O4) obtida pelométodo dos precursorespoliméricos
RESUMO A cobaltita de níquel (NiCo2O4) de estrutura do tipo espinélio apresenta baixa estabilidade térmica em torno dos 400 °C, que ocasiona a perda de NiO, afetando de maneira significativa as propriedades físicas e estruturais do material produzido. Neste trabalho a cobaltita de níquel foi preparada pelo método dos precursores poliméricos. O materi
Matéria (Rio J.). Publicado em: 16/09/2019
-
24. Avaliação do efeito do agente compatibilizante (PP-g-MA) em misturas PP/Amido termoplástico
RESUMO O crescente desperdício de materiais plásticos no meio ambiente juntamente com a preocupação com a futura escassez do petróleo tem aumentado o interesse por polímeros biodegradáveis, como o amido. Nos últimos anos, o amido tem sido utilizado em misturas com diferentes polímeros sintéticos. Essas misturas têm sido compatibilizadas por meio d
Matéria (Rio J.). Publicado em: 16/09/2019