Phase Inversion
Mostrando 1-12 de 121 artigos, teses e dissertações.
-
1. POLYETHERIMIDE/POLYVINYLPYRROLIDONE HOLLOW-FIBER MEMBRANES FOR USE IN HEMODIALYSIS
Abstract In this study, polyetherimide/polyvinylpyrrolidone (PEI/PVP) hollow fiber membranes (HFMs) were synthesized by the phase inversion method. The synthesized PEI/PVP membranes were characterized by morphological analysis and transport properties (hydraulic permeability and solute rejection coefficient). Their performance in uremic solutes separation wa
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
2. Mecanismos de queda do fluxo em membranas de microfiltração de poliéterimida aplicadas à clarificação de água produzida sintética
RESUMO Membranas de microfiltração de poliéterimida foram preparadas pelo método de inversão de fases para controlar a espessura, porosidade e tamanho de poros dos filmes. 1-metil-2-pirrolidona foi utilizada como solvente e água como não solvente. As propriedades das membranas foram avaliadas por meio de microscopia eletrônica de varredura, microfilt
Matéria (Rio J.). Publicado em: 25/11/2019
-
3. Nanoemulsion containing caffeine for cellulite treatment: characterization and in vitro evaluation
The Ginoide Hydrolipodystrophy (GHLD), commonly known as cellulite, occurs in 80-90% of the female population after the puberty period and comes from a metabolic modification in the cutaneous adipose tissue. Caffeine has been used in topical formulations due to its lipolytic action. We studied a nanoemulsion (F3) containing caffeine with two surfactants (ole
Braz. J. Pharm. Sci.. Publicado em: 24/10/2019
-
4. PVC MEMBRANES PREPARED VIA NON-SOLVENT INDUCED PHASE SEPARATION PROCESS
ABSTRACT Polyvinylchloride (PVC) based membranes are prepared via a phase inversion method using N,N-dimethylacetamide (DMAc) as solvent and water as precipitation bath. Polyvinylpyrrolidone (PVP) and lithium nitrate (LiNO3) are used as additives. Experimental cloud point data and solution viscosity measurements are evaluated. Precipitation rates, transport
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
5. Effects of Rotor Speed on Peroxide/Bismaleimide Cured Polypropylene/Nitrile Rubber Thermoplastic Vulcanizates (TPVs)
Elastomer thermoplastics are a class of polymeric materials that received industry attention due to the possibility of joining the elastic of elastomers with the thermoplastics processability. The synergistic properties are linked to the appropriate processing. This study evaluated the effect of rotor speed during polymer mixing and the dynamic vulcanization
Mat. Res.. Publicado em: 09/08/2018
-
6. Tratamiento de efluentes acuosos provenientes de la industria de biodiesel, utilizando tecnología de membranas
ABSTRACT The wastewaters from biodiesel production are generated mainly in the washing process, in this step the contaminants of biodiesel are eliminated in order to the obtained biodiesel meets with the internationals regulations. These wastes contain impurities such as methyl ester, residual oil, mono and diglycerides, soluble salts, catalyst, soap, glycer
Matéria (Rio J.). Publicado em: 19/07/2018
-
7. PREPARATION AND CHARACTERIZATION OF NANOEMULSION CONTAINING A NATURAL NAPHTHOQUINONE
Natural naphthoquinones such as lapachol (Lp) have demonstrated promising biological activities. However, these quinones present low systemic biodisponibility due to its poor aqueous solubility. To overcome this problem, nanoemulsions (NE) formed by oily core are able to incorporate hydrophobic molecules thus enabling them to be dispersed into an aqueous pha
Quím. Nova. Publicado em: 2018-07
-
8. A Dual-mode model interpretation of CO2/CH4 permeability in polysulfone membranes at low pressures
ABSTRACT An asymmetric membrane of polysulfone (PSf) was synthesized by phase inversion method. Permeation experiments were carried out between 2 to 5 bar pressure, and at temperatures 20 to 45°C. The dense-selective layer of PSf membrane presents regular thickness (about 5 µm), and was not possible to observe the formation of macrovoids in porous layer. T
An. Acad. Bras. Ciênc.. Publicado em: 2018-04
-
9. Water Permeability Increase in Ultrafiltration Cellulose Acetate Membrane Containing Silver Nanoparticles
Inorganic nanoparticles incorporation in polymer membranes for filtration processes has attracted the attention of researchers in order to improve in some ways their performance. In this work, AgNPs were synthesized "in situ" in cellulose acetate (CA) membrane by chemical reduction of a silver salt. The membranes were prepared by the nonsolvent induced phase
Mat. Res.. Publicado em: 22/02/2018
-
10. Coagulation Bath in The Production of Membranes of Nanocomposites Polyamide 6/Clay
Membranes of polyamide 6 and its nanocomposites with 3 and 5% of clay were obtained by the phase inversion method using distilled water and solvent as the coagulation bath, 10 and 30% of acid was used, in order to change the membranes morphology/porosity. By XRD analysis, the obtained nanocomposites showed an exfoliated and/or partially exfoliated structure,
Mat. Res.. Publicado em: 15/01/2018
-
11. A Microrheological Study of Poly(Methyl Methacrylate) Elastomer/Poly(Ethylene Terephthalate) (PMMAelast/PET) Blends
This study involved an evaluation of the influence of phase inversion in poly(methyl methacrylate) elastomer/poly(ethylene terephthalate) binary blends (PMMAelast/PET) and the effect of the addition of poly(methyl methacrylate-glycidyl methacrylate-ethyl acrylate) (MGE) interfacial compatibilizer on the microrheological properties of this polymer blend. Ther
Mat. Res.. Publicado em: 30/11/2017
-
12. Oil Removal from Produced Water by Ultrafiltration using Polysulfone Membrane
Abstract The present paper deals with the ultrafiltration (UF) of produced water using a polysulfone membrane. Membranes were prepared by the phase inversion technique using polysulfone (PSf) polymer base, poly vinyl pyrrolidone (PVP) additive and N-methyl-2-pyrrolidone (NMP) solvent. Prepared UF membranes were characterized by determining the surface morpho
Braz. J. Chem. Eng.. Publicado em: 2017-04