Phase Equilibrium
Mostrando 13-24 de 479 artigos, teses e dissertações.
-
13. Avaliação do uso de argilas montmorilonitas modificadas na adsorção de nitrato em meio aquoso
RESUMO Este estudo investigou a eficiência da remoção de nitrato em meio aquoso usando adsorção em argilas montmorilonitas comerciais, comparativamente a uma resina aniônica comumente usada nessa operação. Algumas dessas argilas foram intercaladas como o íon hexadeciltrimetilamônio para avaliação. Áreas superficiais específicas, capacidades de
Eng. Sanit. Ambient.. Publicado em: 21/03/2019
-
14. Efecto de la sustitución de V por Ti sobre las temperaturas de transformación de fase y el desajuste de red matriz/precipitado en la superaleación 76Fe-12Al-12V
ABSTRACT Fe-Al based alloys have a remarkable potential for high temperature structural applications, provided that the limitation of their low creep resistance is solved. Third element addition (Nb, Ti, Zr or Ta) has proven to per-form the task, at the expense of a low ductility. In previous works we have investigated ferritic alloys in the Fe-Al-V system w
Matéria (Rio J.). Publicado em: 19/07/2018
-
15. Identificación de precipitados en aleaciones U-Nb-Zr tratadas térmicamente a 850 ºC
ABSTRACT At the present, the international goal is to develop and qualify a very high U density fuel for high flux research reactors. The selected U-alloy must present an isotropic crystalline structure at the end of the fuel fabrication process. These types of structures exhibit stable behavior under irradiation. In particular, it is wanted to retain as met
Matéria (Rio J.). Publicado em: 19/07/2018
-
16. Anelasticity of Phase Transitions and Magnetostriction in Fe-(27-28%)Ga Alloys
Several aspects of anelastic behavior of Fe-(27-28%)Ga-Tb alloys are considered in this paper: (i) the phase transitions from a metastable to an equilibrium phase and phase transitions between equilibrium phases at higher temperatures in as cast alloys, (ii) the nature of corresponding three transient anelastic effects, (iii) the formation of an intrinsic co
Mat. Res.. Publicado em: 07/06/2018
-
17. Morphology and Phase Formation During the Solidification of Al-Cu-Si and Al-Ag-Cu Ternary Eutectic Systems
The microstructure of ternary alloys in the Al rich corner of the Al-Cu-Si and Al-Ag-Cu systems were analyzed in order to determine the solidification path in the different structural regions expected from the equilibrium phase diagram. The analysis was based on theoretical models developed in the literature for solidification of ternary eutectic system allo
Mat. Res.. Publicado em: 26/02/2018
-
18. Effects of Local Heat Input Conditions on the Thermophysical Properties of Super Duplex Stainless Steels (SDSS)
The properties of the super duplex stainless steels (SDSS) are strongly affected by the thermal history imposed by welding procedures. The controlled dual phase microstructure (ferrite and austenite) guarantee excellent mechanical properties such as mechanical strength and corrosion resistance, in addition to small thermal expansion coefficient and high ther
Mat. Res.. Publicado em: 11/01/2018
-
19. Discharge of Non-Reactive Fluids from Vessels
Abstract This paper presents simulations of discharges from pressure vessels that consistently account for non-ideal fluid behavior in all the required thermodynamic properties and individually considers all the chemical components present. The underlying assumption is that phase equilibrium occurs instantaneously inside the vessel and, thus, the dynamics of
Braz. J. Chem. Eng.. Publicado em: 2017-10
-
20. Elastoplastic Stability and Failure Analysis of FGM Plate with Temperature Dependent Material Properties under Thermomechanical Loading
Abstract The present paper explores the stability and failure response of elastoplastic Ni/Al2O3 functionally graded plate under thermomechanical load using non-linear finite element formulation based on first-order shear deformation theory and von-Karman’s nonlinear kinematics. The temperature dependent thermoelastic material properties of FGM plate are v
Lat. Am. j. solids struct.. Publicado em: 2017-08
-
21. Microstructural Evolution and Mechanical Properties of Ni57Nb33Zr5Co5 Metallic Glass
The Ni57Nb33Zr5Co5 metallic glass is a promising alloy for bipolar plates in proton exchange membrane fuel cells. It is important to know which phase forms in this alloy under different cooling rates in order to understand its influence on the thermal stability and mechanical properties. In this work, melt-spun ribbons and rod samples with 1, 2 and 3 mm diam
Mat. Res.. Publicado em: 06/07/2017
-
22. Liquid-Liquid Equilibrium Data, Viscosities, Densities, Conductivities, and Refractive Indexes of Poly (vinyl pyrrolidone)+ tri-sodium Citrate + Urea Aqueous Two-Phase Systems at Different pH
Abstract The present study investigated liquid-liquid equilibria of polyvinylpyrrolidone (PVP) K30 + tri-sodium citrate + urea (5% and 10% mass) aqueous two-phase systems at 25°C and pH values of 6.2, 7.4, and 10.0. Results showed that the binodal was displaced toward higher concentrations as the urea concentration increased. The effect of pH, polymer/salt
Braz. J. Chem. Eng.. Publicado em: 2017-07
-
23. Phase Diagram Study for the PbO-ZnO-CaO-SiO2-"Fe2O3" System in Air with CaO/SiO2 in 1.1 and PbO/(CaO+SiO2) in 2.4 Weight Ratios
An experimental study on the phase equilibrium and the liquidus isotherms for the PbO-ZnO-CaO-SiO2-"Fe2O3" system with CaO/SiO2 in 1.1 and PbO/(CaO+SiO2) in 2.4 weight ratios, respectively, was carried out in the temperature range 1100-1300ºC (1373-1573 K). High temperature phases were determined by the equilibrium-quenching method. Results are presented in
Mat. Res.. Publicado em: 05/06/2017
-
24. Oil Removal from Produced Water by Ultrafiltration using Polysulfone Membrane
Abstract The present paper deals with the ultrafiltration (UF) of produced water using a polysulfone membrane. Membranes were prepared by the phase inversion technique using polysulfone (PSf) polymer base, poly vinyl pyrrolidone (PVP) additive and N-methyl-2-pyrrolidone (NMP) solvent. Prepared UF membranes were characterized by determining the surface morpho
Braz. J. Chem. Eng.. Publicado em: 2017-04