Particle Method
Mostrando 1-12 de 671 artigos, teses e dissertações.
-
1. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
2. Production of nanostructured crystalline composite using residual ashes from flocculated sludge burning process in a poultry slaughterhouse wastewater treatment system
Abstract Nanostructured crystalline composite (activated carbon) was synthesized from residual ashes of the burning process of the sludge generated in the flotation step of a poultry slaughterhouse and was used for Allura red dye adsorption. The ashes were chemically activated using two types of reagents, H2O2 and H3PO4, and the structure, morphology, and su
Cerâmica. Publicado em: 2022
-
3. Biphasic 0.8BaTiO3/0.2Ni(1-x)CoxFe2O4 nanopowders by in situ sol-gel synthesis
Abstract Nanopowders of the 0.8BaTiO3/0.2Ni(1-x)CoxFe2O4 (x=0, 0.25, 0.5, 0.75, and 1) were synthesized by the in situ sol-gel method using poly(acrylic acid) (PAA1800) as a chelating agent. The synthesis developed using PAA1800 ensured the simultaneous crystallization of two phases. The results provided a reliable method for producing biphasic nanopowders i
Cerâmica. Publicado em: 2022
-
4. Optimization Techniques and Mathematical Modeling Applied to Reluctance Motors
Abstract The present work aims at the application of different optimization strategies in the electromagnetic analysis of the Variable Reluctance Motor (VRM) through Finite Element (FE) simulation. Two case studies are investigated: the first one aims to optimize the geometry and electrical characteristics of windings of a single-phase VRM 6/6, minimizing co
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
5. Pretreatment and Enzymatic Saccharification of Water Hyacinth, Sugarcane Bagasse, Maize Straw, and Green Coconut Shell Using an Organosolv Method with Glycerol and FeCl3
A method to pretreatment of biomasses using glycerol as a green solvent was developed. Optimization of organosolv pretreatment was performed using a 23 factorial design, investigating synergism among the variables particle size (from < 0.85 to > 2.0 mm), FeCl3 concentration (0.025-0.175 mol L-1), and temperature (160-220 °C). Although the effects of the var
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
6. EFFECT OF REACTION CONDITIONS ON PARTICLE SIZE OF ZNO NANOPARTICLES VIA CONTROLLED PRECIPITATION METHOD AND IN-VITRO ANTIBACTERIAL CAPACITY
High-yield ZnO spheroidal nanoparticles with an average diameter around 23 nm (≈ 25% frequency) and 30 nm (≈ 28% frequency) were obtained by controlled semicontinuous precipitation at low temperatures. This synthesis was obtained from hydrozincite (Zn5(CO3)2(OH)6) as primary nanoparticles. The Zn5(CO3)2(OH)6 nanoparticles were synthesized by hydrolysis o
Química Nova. Publicado em: 2022
-
7. Simple and fast process using hydrochloric acid for producing synthetic zinc-rich stevensite
Abstract In the last decades, clays have been used in sectors such as health and cosmetics. This requires products that are increasingly pure and present homogeneous properties, hardly found in natural clays. The use of synthetic clays can be a solution. For this, it is necessary to explore techniques for their production. The main focus of this study was to
Cerâmica. Publicado em: 2022
-
8. An alternative route to extract nickel and cobalt from non-commercial laterite ore
Abstract Laterite ores, which represent around two-thirds of nickel reserves, became an important source of nickel and cobalt metals. The objective of the present study was to investigate the efficiency of a hybrid route to extract nickel and cobalt present in a laterite ore sample which was not commercially attractive to be processed through the current rou
REM - International Engineering Journal. Publicado em: 2022
-
9. A Novel In Silico Monte Carlo Approach to Optimize a PSD Estimation Problem. Generation of Data Fusion Experiment Rules
ABSTRACT This article analyzes the performance of combining information from Scanning Electron Microscopy (SEM) micrographs with Static Light Scattering (SLS) measurements for retrieving the so-called Particle Size Distribution (PSD) in terms of experimental features. The corresponding data fusion is implemented using a novel Monte Carlo-based method consist
Trends in Computational and Applied Mathematics. Publicado em: 2022
-
10. Analytical method validation for the identification and quantification of dissolved gold and gold nanoparticles in cosmetics products by single particle inductively coupled plasma mass spectrometry
Nanoparticle (NP) applications have recently gained more space in the development of many products, especially in cosmetology. The aim of the present study was to validate a single particle inductively coupled plasma mass spectrometry technique for the detection and quantification of gold nanoparticles (AuNPs) and gold ions (Au (i)) in different cosmetics cu
Quím. Nova. Publicado em: 2021-06
-
11. Gold Nanorods Capped with Different Ammonium Bromide Salts on the Catalytic Chemical Reduction of p-Nitrophenol
It is known that the reactivity of the nanocatalytic systems is related to the particle size and shape and also to the features of the capping agents on the nanostructures. In this study, gold nanorods (AuNRs) were synthesized by the seed-mediated method using different tetra-alkylammonium bromide salts as capping agents, that are, cetyltrimethylammonium (CT
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
12. Characterization of Otto Chips by Particle Swarm Optimization
Abstract Recently a surface plasmon resonance (SPR) optical sensor, based on the Otto configuration — the Otto chip — has been developed. One essential step in the quality control of the fabrication process is characterization of the active region of several devices in a batch. Characterization is done by measuring the angular spectrum of the optical re
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03