Optical Flow
Mostrando 1-12 de 169 artigos, teses e dissertações.
-
1. Alternative Approaches Applied to Inductively Coupled Plasma Techniques: Multi-Flow and Two-Flow Calibration
Multi-flow calibration (MFC) is based on monitoring the analytical signal from a single calibration standard solution at several different nebulization gas flow rates (Q), which normalizes plasma conditions and minimizes matrix effects. In the present study, MFC was evaluated, for the first time, applied to inductively coupled plasma optical emission spectro
J. Braz. Chem. Soc.. Publicado em: 2021-04
-
2. Effect of Welding Heat Input on the Microstructure and Mechanical Properties of Dissimilar Friction Stir-Welded Copper/Brass Lap Joint
Dissimilar lap welded joints of copper and brass metals were fabricated by friction stir welding (FSW) method at various welding heat inputs. The effect of welding heat inputs on the microstructure and mechanical properties of overlap welded joints at at two different join configurations (i.e. Advancing side and Retreating side joint configurations) was inve
Mat. Res.. Publicado em: 26/08/2019
-
3. Low triiodothyronine syndrome is associated with platelet function in patients with nephrotic syndrome
RESUMO OBJETIVO O objetivo deste estudo foi investigar os efeitos da síndrome do baixo triiodotironina (LT3S) na função plaquetária e nos fatores de coagulação em pacientes com síndrome nefrótica (SN). MÉTODOS Pacientes com síndrome nefrótica primária foram divididos em dois grupos, função tireoidiana normal (grupo A) e LT3S (grupo B), com
Rev. Assoc. Med. Bras.. Publicado em: 05/08/2019
-
4. Optical coherence tomography angiography findings in malignant hypertensive retinopathy
RESUMO Um homem de 33 anos apresentou-se à nossa clínica com baixa visão em ambos os olhos que começou uma semana antes. A acuidade visual foi de 20/63 no olho direito e 20/50 no olho esquerdo. O exame de fundo de olho revelou sinais de retinopatia hipertensiva; então, adotou-se uma abordagem multidisciplinar para o diagnóstico e tratamento desse pacie
Arq. Bras. Oftalmol.. Publicado em: 2019-02
-
5. Effect of Solidification Processing Parameters and Silicon Content on the Dendritic Spacing and Hardness in Hypoeutectic Al-Si Alloys
Aluminium with silicon as alloying element, form a class of material providing the most significant part of all material casting manufactured materials. These alloys have a wide range of applications in the automotive and aerospace industries. It is widely recognized that moderate addition of silicon to aluminum, significantly improves the resulting mechanic
Mat. Res.. Publicado em: 17/09/2018
-
6. Evaluation of bulk-fill systems: microtensile bond strength and non-destructive imaging of marginal adaptation
Abstract The objective of this study was to investigate microtensile bond strength (MTBS) and interfacial adaptation (IA) of bulk-fill restorative systems bonded to dentin in Class-I-preparations. Box-shaped preparations (4-mm-long, 3-mm-wide, 2-mm-high) made in extracted molars, and Teflon matrix with the same dimensions positioned over the occlusal surface
Braz. oral res.. Publicado em: 06/08/2018
-
7. Evaluación del uso de acetileno como fuente de carbono en la carburización de aceros
ABSTRACT The effect of using acetylene as a carbon source in the gas carburization of AISI/SAE 8620 steel was evaluated in this work. For this purpose, a gaseous carburizing system was designed and manufactured with the following characteristics: controlled production of a carburant gaseous atmosphere, inert and hermetic isothermal reaction zone and carbon/o
Matéria (Rio J.). Publicado em: 19/07/2018
-
8. An Experimental Study of the Solidification Thermal Parameters Influence upon Microstructure and Mechanical Properties of Al-Si-Cu Alloys
Metals solidification involves the transformation of the molten metal back into the solid state. Solidification structures impact heavily on the final product's characteristics. The microstructure effects on metallic alloys properties have been highlighted in various studies and particularly the dendrite arm spacing influence upon the mechanical properties s
Mat. Res.. Publicado em: 18/06/2018
-
9. Nutrient Biological Removal in an Up-flow Sludge Bed Reactor under Intermittent Aeration using Glycerol as the Sole Carbon Source
Abstract This work evaluated the feasibility of glycerol as the sole carbon source for nutrient biological removal in an intermittently aerated bioreactor. The reactor operation was divided into two phases: the first one aimed only at removing nitrogen; and the second one aimed at removing nitrogen and phosphorus. In the first operational phase, three C/N (C
Braz. J. Chem. Eng.. Publicado em: 2017-10
-
10. Determination of Inorganic Contaminants in Electrical and Electronic Equipment after Digestion Using Microwave-Assisted Single Reaction Chamber
A method for digestion of plastics from waste of electrical and electronic equipment (WEEE) was developed using the microwave-assisted wet digestion in single reaction chamber (MAWD-SRC). The determination of As, Cd, Co, Cr, Cu, Ni, Pb, Sb and Zn by inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectrom
J. Braz. Chem. Soc.. Publicado em: 2017-09
-
11. Influence of Process Parameters on Zinc Powder Produced by Centrifugal Atomisation
An experimental centrifugal atomiser was used to study the manufacture of zinc powder. Melt temperature, melt flow rate, rotating speed and diameter of the atomising disc, are operating parameters that were varied, and their effects on powder quality and yield were observed. The median particle size and the particle size distribution tended to be better, i.e
Mat. Res.. Publicado em: 10/04/2017
-
12. Oxygen Effect on Structural and Optical Properties of ZnO Thin Films Deposited by RF Magnetron Sputtering
ZnO thin films with wurtzite structure have been grown on Si (100) and glass substrates using radio frequency (rf) magnetron sputtering at room temperature. The ZnO thin films have been characterised by XRD. The (002) orientation is observed at zero Oxygen flow after the (100) developed with increasing oxygen ratio. Usually, this orientation (100) is difficu
Mat. Res.. Publicado em: 13/03/2017