Nusselt Number
Mostrando 1-12 de 31 artigos, teses e dissertações.
-
1. EFFECT OF STEEL PLATE THICKNESSES AND FLUID FLOW CHARACTERISTICS OF AN IMPINGING AIR JET ON HEAT TRANSFER AT THE STAGNATION POINT
ABSTRACT The design and process of heat transfer elements, from its source to heat sink through various media vary according to the product and system concerned. The effect of thickness of a steel plate on heat transfer characteristics with an impinging air jet at the stagnation point was studied. Experiments were carried out with different nozzles, heights,
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
2. EFFECT OF ROTATION RATES ON THE LAMINAR FLOW AND HEAT TRANSFER PAST A CIRCULAR CYLINDER
AbstractIn this work, forced convection heat transfer past a rotating circular cylinder with a constant non-dimensional rotation rate α varying from 0 to 6 was investigated for Reynolds numbers of 20-200 and a Prandtl number of 0.7. The numerical calculations are carried out by using a finite-volume method based commercial computational fluid dynamics solve
Braz. J. Chem. Eng.. Publicado em: 2015-06
-
3. Natural convection of nanofluids over a convectively heated vertical plate embedded in a porous medium
In this paper, the natural convective flow of nanofluids over a convectively heated vertical plate in a saturated Darcy porous medium is studied numerically. The governing equations are transformed into a set of ordinary differential equations by using appropriate similarity variables, and they are numerically solved using the fourth-order Runge-Kutta method
Braz. J. Chem. Eng.. Publicado em: 2014-06
-
4. Mixed convection flow by a porous sheet with variable thermal conductivity and convective boundary condition
Effects of variable thermal conductivity on the mixed convection flow over a porous stretching surface are investigated. Analysis has been performed subject to the convective boundary conditions. The fluid is electrically conducting in the presence of a uniform applied magnetic field. The resulting problems are computed. The effects of emerging parameters on
Braz. J. Chem. Eng.. Publicado em: 2014-03
-
5. Investigation of heat transfer processes involved liquid impingement jets: a review
This review reports research on liquid impingement jets and the abilities, limitations and features of this method of heat transfer. Some available and important correlations for Nusselt number are collected here. Also we demonstrate the capability of nanofluids to be applied in heat transfer processes involved liquid impingement jets.
Braz. J. Chem. Eng.. Publicado em: 2013-09
-
6. Análise da convecção forçada no escoamento bidimensional laminar em dutos retangulares via GITT com variáveis primitivas. / Analysis of forced convection in two-dimensional laminar flow in rectangular ducts with via gitt primitive variables.
In the present study, forced convection flow in two-dimensional laminar simultaneous development pipeline with rectangular geometry, is analyzed analytically using the Navier-Stokes, Poisson and Energy in its primitive form. These equations are solved by the Generalized Integral Transform Technique, which is characteristic hybrid-numeric. The development wor
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/09/2012
-
7. Wall effects on the cross-buoyancy around a square cylinder in the steady regime
The effects of blockage ratio on the combined free and forced convection from a long heated square obstacle confined in a horizontal channel are investigated in this work. The numerical computations are performed in the steady regime for Reynolds number = 1 - 30, Richardson number = 0 - 1 for blockage ratios of 0.125 and 0.25 for the fixed Prandtl number of
Brazilian Journal of Chemical Engineering. Publicado em: 2012-06
-
8. Dimensional analysis and empirical correlations for heat transfer and pressure drop in condensation and evaporation processes of flow inside micropipes: case study with carbon dioxide (CO2)
In this paper, the experimental results of the convection heat transfer coefficient and pressure drop values during condensation and evaporation of CO2 were obtained at different operating conditions for flow inside micropipes. Reynolds number (ReD) ranged between 2000 and 15000. The dimensional analysis technique was utilized to develop correlations for Nus
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2012-03
-
9. Computational modelling of MHD unsteady flow and heat transfer toward a flat plate with Navier slip and Newtonian heating
The combined effects of Navier slip and Newtonian heating on an unsteady hydromagnetic boundary layer stagnation point flow towards a flat plate in the presence of a magnetic field are studied. The self-similar equations are obtained using similarity transformations and solved numerically by a shooting algorithm with a Runge-Kutta Fehlberg integration scheme
Brazilian Journal of Chemical Engineering. Publicado em: 2012-03
-
10. Turbulent natural convection in enclosures using large-eddy simulation with localized heating from horizontal bottom surface and cooling from vertical surfaces
Turbulent natural convection of air that happens into inner square cavity with localized heating from horizontal bottom surface has been numerically investigated. Localized heating is simulated by a centrally located heat source on the bottom wall, and two values of the dimensionless heat source length ? are considered in the present work. Solutions are obta
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2009-09
-
11. Reynolds number effect on the heat transfer mechanisms in aircraft hot air anti-ice system.
The primary means of preventing ice formation on wings and engine inlets for modern commercial transport aircraft is by extracting hot air from the compressor and blowing it on the inside surface of the leading edge through small holes drilled in the so-called piccolo tube system. A critical aspect in the design of such system is the prediction of heat trans
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/03/2008
-
12. Study of hydrodynamics and heat transference from liquid whole egg through plate with three formats chevron / Estudo da hidrodinamica e transferencia de calor do ovo integral liquido atraves de placas com tres formatos chevron
At this work are showed the heat transference and hydrodynamics of liquid egg flow between ducts with corrugated walls, simulating plate heat exchangers. The contour conditions admitted was the constant temperature in the walls during the fluid heating. The whole egg rheology was experimentally determinated in a extend temperature range (289 ? 335K). The egg
Publicado em: 2008