Numerical Coupling
Mostrando 1-12 de 124 artigos, teses e dissertações.
-
1. Finite element computational development for thermo-mechanical analysis of plane steel structures exposed to fire
Abstract This article presents a numerical formulation based on finite element procedures for application in nonlinear thermo-mechanical analyses of steel planar structures under fire condition. The mechanical properties of structural elements degrade when subjected to high temperatures, resulting in significant reductions in strength and stiffness. Under th
REM - International Engineering Journal. Publicado em: 2022
-
2. Design and Implementation of Microwave Dual-Band Pass Interdigital Filter Using an Analytical Approach
Abstract In this paper, benefiting from frequency transformation between the normalized frequency domain of low-pass prototype frequencies and the real frequency domain of the filter, a purely analytical procedure for dual-band filter design is used. The coupling matrix of the filter is analytically extracted, without the need to perform numerical optimizati
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Implementation of ventilation towers in a greenhouse established in low altitude tropical climate conditions: numerical approach to the behavior of the natural ventilation
ABSTRACT Deficient ventilation rates and airflow patterns in naturally ventilated greenhouses are the main causes for the generation of inadequate and heterogeneous thermal conditions inside this type of structure. In this research, a numerical study was developed using a two-dimensional computational fluid dynamics model validated in a Colombian greenhouse
Rev. Ceres. Publicado em: 2021-02
-
4. Mu-Negative Metamaterials Seen as Band-Limited Non-Foster Impedances in Inductive Power Transmission Systems
Abstract In the last decade, various works have demonstrated that a class of artificial material called metamaterials (MTM) can synthesize mu-negative (MNG) media capable of evanescent-wave focusing which largely enhances the magnetic coupling between coils, which is the basic mechanism of Inductive Power Transmission (IPT) systems. In the present work, MTM-
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 11/11/2019
-
5. Modular modeling approach for FDM printed structures and piezo disks for metamaterial design
Abstract Research in metamaterials has recently gained interest in the field of noise and vibration control. The ability of creating band gap zones with minimum added mass is the main feature behind its success. In addition, the use of 3D printed parts, particularly the Fused Deposition Modeling (FDM), offers a practical solution for manufacturing parts with
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
6. Study on elastoplastic coupling mechanics model of the milled mixture of sugar cane
Abstract At present, the phenomenon of elastoplastic coupling isn’t considered in establishing the mechanics model of the milled mixture of sugar cane. In order to describe elastoplastic coupling and yield characteristics, based on uniaxial confined compression tests and direct shear tests, the evolution of the elastic parameters of the solid fiber with v
Food Sci. Technol. Publicado em: 11/04/2019
-
7. Coupled numerical simulation of a tailings deposit by FEM
Abstract Researchers have found that a valuable alternative for predicting the mechanical behavior of landfill construction is numerical simulation based on the finite element method. The results of such a numerical simulation for a sandy tailings deposit from the iron mining coupling flow and deformation are presented herein. This study investigates the inf
REM, Int. Eng. J.. Publicado em: 2019-03
-
8. Near the resonance behavior of a periodicaly forced partially dissipative three-degrees-of-freedom mechanical system
Abstract In this paper, a nonlinear three-degrees-of-freedom dynamical system consisting of a variable-length pendulum mass attached by a massless spring to the forced slider is investigated. Numerical solution is preceded by application of Euler-Lagrange equation. Various techniques like time histories, phase planes, Poincaré maps and resonance plots are
Lat. Am. j. solids struct.. Publicado em: 14/06/2018
-
9. A Direct Approach for Coupling Matrix Synthesis for Coupled Resonator Diplexers
Abstract Diplexers are used to separate or combine two bands of frequencies and they are designed by combining channel filters using distribution circuit or alternatively designed based on coupled resonator circuits. Design parameters of coupled resonator circuits such as coupling coefficients, self-resonant frequencies and external couplings are done using
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-12
-
10. Reduced Order Modeling of Composite Laminates Through Solid-Shell Coupling
ABSTRACT: Composite laminates display a complex mechanical behavior due to their microstructure, with a through-thickness variation of the displacement and stress fields that depends on the fiber orientation in each layer. Aiming to develop reduced-order numerical models mimicking the real response of composite structures, we investigated the capability and
J. Aerosp. Technol. Manag.. Publicado em: 26/06/2017
-
11. Imposition of Dirichlet Boundary Conditions in Element Free Galerkin Method through an Object-Oriented Implementation
Abstract One of the main drawbacks of Element Free Galerkin (EFG) method is its dependence on moving least square shape functions which don’t satisfy the Kronecker Delta property, so in this method it’s not possible to apply Dirichlet boundary conditions directly. The aim of the present paper is to discuss different aspects of three widely used methods o
Lat. Am. j. solids struct.. Publicado em: 2017-06
-
12. A Simple FEM Formulation Applied to Nonlinear Problems of Impact with Thermomechanical Coupling
Abstract The thermal effects of problems involving deformable structures are essential to describe the behavior of materials in feasible terms. Verifying the transformation of mechanical energy into heat it is possible to predict the modifications of mechanical properties of materials due to its temperature changes. The current paper presents the numerical d
Lat. Am. j. solids struct.. Publicado em: 2017