Non Linear Material
Mostrando 13-24 de 134 artigos, teses e dissertações.
-
13. Use of Experimental Design to Evaluate the Effect of the Incorporation of Quartzite Residues in Ceramic Mass for Porcelain Tile Production
The potential of using quartzite residues in the composition of an industrial ceramic mass for porcelain tile production was investigated through experimental design. Chemical, physical and microstructural analyses were accomplished to understand how the incorporation of quartzite residues affects the material, before and after sintering. Central composite d
Mat. Res.. Publicado em: 29/10/2018
-
14. Optimization of reinforced concrete polygonal sections under biaxial bending with axial force
Abstract Concrete is the world’s most utilized material for production of the structural elements employed in civil construction. Due to its low tensile strength and brittle nature it is reinforced with steel bars forming the reinforced concrete (RC structure). Linear elements of reinforced concrete are commonly employed in multi-story buildings, bridges,
Lat. Am. j. solids struct.. Publicado em: 04/10/2018
-
15. Surface Imprinting of Silica Gel by Methyldopa and Its Application in the Solid Phase Extraction Procedure
An imprinted amino-functionalized silica gel material was prepared by surface molecular imprinting technique combined with a sol-gel process on the supporter of activated silica gel and used as a solid-phase extraction for the extraction and determination of methyldopa (MTD). Non-imprinted silica adsorbent was synthesized without the addition of MTD using th
J. Braz. Chem. Soc.. Publicado em: 2018-02
-
16. Incorporation of Lead Containing TV Tube Glass Waste in Aluminous Porcelain
The aim of this work was to study the incorporation of lead containing TV tube glass waste as a method to provide alternative raw material for aluminous electrical porcelain. For this purpose, aluminous porcelain formulations containing up to 30 wt.% of TV tube glass waste as a replacement for traditional flux material (sodium feldspar) were pressed and fire
Mat. Res.. Publicado em: 21/09/2017
-
17. Elastoplastic Stability and Failure Analysis of FGM Plate with Temperature Dependent Material Properties under Thermomechanical Loading
Abstract The present paper explores the stability and failure response of elastoplastic Ni/Al2O3 functionally graded plate under thermomechanical load using non-linear finite element formulation based on first-order shear deformation theory and von-Karman’s nonlinear kinematics. The temperature dependent thermoelastic material properties of FGM plate are v
Lat. Am. j. solids struct.. Publicado em: 2017-08
-
18. Micro-Scale Abrasive Wear Testing of CrN Duplex PVD Coating on Pre-Nitrided Tool Steel
Specific wear rates were calculated from a series of micro-scale abrasive tests by means of the calotte-grinding method. The tested material was a CrN coating deposited by arc evaporation on ion-nitrided AISI H13 steel. Characterizations included: phase analysis, chemical composition, metallography, microhardness, micro-scratch resistance and nano-indentatio
Mat. Res.. Publicado em: 22/06/2017
-
19. Development and validation of alternative methods by non-aqueous acid-base titration and derivative ultraviolet spectrophotometry for quantification of sildenafil in raw material and tablets
Sildenafil citrate (SILC) is a potent phosphodiesterase-5 inhibitor used for erectile dysfunction and pulmonary hypertension. This study shows two simple, fast and alternative analytical methods for SILC determination by non-aqueous titration and by derivative ultraviolet spectrophotometry (DUS) in active pharmaceutical ingredient and/or dosage forms. The qu
Braz. J. Pharm. Sci.. Publicado em: 20/04/2017
-
20. Thermogravimetric and spectroscopic study (TG–DTA/FT–IR) of activated carbon from the renewable biomass source babassu
Activated carbons (ACs) with well–developed microstructure and high microporosity were obtained from biomass by potassium hydroxide activation. The preparation process consisted in producing carbon materials in the ratios of activating agent to raw material 70:30, 50:50, 30:70 and 25:75 (w/w) characterized by thermal analysis coupled to spectroscopy (TG–
Quím. Nova. Publicado em: 2017-04
-
21. Nonlinear Vibration and Mode Shapes of FG Cylindrical Shells
Abstract The nonlinear vibration and normal mode shapes of FG cylindrical shells are investigated using an efficient analytical method. The equations of motion of the shell are based on the Donnell’s non-linear shallow-shell, and the material is assumed to be gradually changed across the thickness according to the simple power law. The solution is provided
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
22. Nonlinear Dynamics Analysis of FGM Shell Structures with a Higher Order Shear Strain Enhanced Solid-Shell Element
Abstract In this paper, non-linear dynamics analysis of functionally graded material (FGM) shell structures is investigated using the higher order solid-shell element based on the Enhanced Assumed Strain (EAS). With this element, a quadratic distribution of the shear stress through the thickness is considered in an enhancing part. Material properties of the
Lat. Am. j. solids struct.. Publicado em: 2017-01
-
23. Numerical Analysis of Geometrically Non-Linear Behavior of Functionally Graded Shells
Abstract In this paper, a geometrically nonlinear analysis of functionally graded material (FGM) shells is investigated using Abaqus software. A user defined subroutine (UMAT) is developed and implemented in Abaqus/Standard to study the FG shells in large displacements and rotations. The material properties are introduced according to the integration points
Lat. Am. j. solids struct.. Publicado em: 2017
-
24. Thermal Distortion Analysis of Inflatable Antenna Structures Considering Inflation Gas
ABSTRACT This paper addresses the static distortion and stress analysis of inflatable antenna structures subjected to a thermal load, which is a very important type of load experienced by such structures during service in orbit. Non-linear finite element analysis methods for inflatable structures were formulized, and the thermal stress of thin films was cons
J. Aerosp. Technol. Manag.. Publicado em: 2016-12