Nanocomposites Materials
Mostrando 13-24 de 81 artigos, teses e dissertações.
-
13. Hybrids membranes with potential for fuel cells – Part 3: extruded films of nanocomposites based on sepiolite and PC/sulfonated PC blends
Abstract Fuel Cells based in polymers are an alternative for the conventional energetic matrices. However, materials currently available still present disadvantages to overcome. Membranes of polycarbonate (PC)/sulfonated polycarbonate (PCs) blend/sepiolite nanocomposites have previously been studied by the authors, resulting in good mechanical properties an
Polímeros. Publicado em: 21/05/2018
-
14. Fabrication of poly(lactic acid) incorporated chitosan nanocomposites for enhanced functional polyester fabric
Abstract This study dealt with the fabrication and analysis of poly(lactic acid) (PLA) mediated chitosan nanocomposite. Such a novel nanobiocomposite may get future applications in drug delivery, and nanofinising of textile and polymer surfaces. Herein, this nanocomposite has been considered as an antibacterial finishing agent for a hydrophobic textile fabr
Polímeros. Publicado em: 21/05/2018
-
15. Using Severe Plastic Deformation to Fabricate Strong Metal Matrix Composites
The processing of bulk metals through the application of severe plastic deformation leads to significant grain refinement and a consequent strengthening of the material. High-pressure torsion (HPT) generally refers to the processing of disk samples and this technique is especially effective in producing extremely small grains. Recently, new experiments were
Mat. Res.. Publicado em: 23/10/2017
-
16. Using Magnetized (Fe3O4 / Biochar Nanocomposites) and Activated Biochar as Adsorbents to Remove Two Neuro-Active Pesticides from Waters
This work describes the removal of pesticides from water using activated and magnetized biochars produced from exhausted husk, and dry tannin from barks of black wattle (Acacia mearnsii De Wild.). These materials were characterized using chemical, spectroscopic, thermal, solid structure and surface area techniques. The activated and magnetized biochars were
J. Braz. Chem. Soc.. Publicado em: 2017-10
-
17. Synthesis of TiO2/SiO2-B2O3 Ternary Nanocomposites: Influence of Interfacial Properties on their Photocatalytic Activities with High Resolution Mass Spectrometry Monitoring
An investigation on unusual interface properties of unprecedented ternary composites, formed by the inclusion of assorted proportions of B2O3 into TiO2/SiO2 structure, is conducted herein. The influences of B2O3 content and calcination temperature were evaluated. The precursor TiO2/SiO2 material was synthesized via a simple sol-gel procedure that was followe
J. Braz. Chem. Soc.. Publicado em: 2017-10
-
18. Assessment of Percolation Threshold Simulation for Individual and Hybrid Nanocomposites of Carbon Nanotubes and Carbon Black
Modeling electrical conductivity of polymer composites with conductive fillers has great applicability to predict conductive materials behavior. In this study, the electrical behavior of simple and hybrid systems prepared from Carbon Black (CB) and Carbon Nanotubes (CNT) was studied. There have been few advances reported in the literature regarding the model
Mat. Res.. Publicado em: 18/09/2017
-
19. Evaluation of the Mechanic and Electrochemical Properties of an Epoxy Coating with Addition of Different Polyhedral Oligomeric Silsesquioxanes (POSS) Applied on Substrate of Low Alloy Steel
The epoxy resin is one of the matrices most employed in obtaining composites and coatings. Its properties have been modified using materials such as clays and polyhedral oligomeric silsesquioxanes - POSS. The use of POSS in the preparation of thermosetting nanocomposites has been studied in obtaining hybrid materials with higher mechanic and surface properti
Mat. Res.. Publicado em: 31/07/2017
-
20. Non-Synergistic UV-A Photocatalytic Degradation of Estrogens by Nano-TiO2 Supported on Activated Carbon
Many studies have reported significant improvements in the photocatalytic degradation capacity of TiO2 immobilized in carbonaceous materials, mainly due to a well-characterized synergistic effect. The photocatalytic degradation of the estrogens 17β-estradiol and 17α-ethynylestradiol was evaluated using 1 mg L-1 aqueous solutions, employing a nanocomposite
J. Braz. Chem. Soc.. Publicado em: 2017-04
-
21. Enhanced bioactive properties of BiodentineTM modified with bioactive glass nanoparticles
Abstract Objective To prepare nanocomposite cements based on the incorporation of bioactive glass nanoparticles (nBGs) into BiodentineTM (BD, Septodent, Saint-Maur-des-Fosses Cedex, France) and to assess their bioactive properties. Material and Methods nBGs were synthesised by the sol-gel method. BD nanocomposites (nBG/BD) were prepared with 1 and 2% nBG
J. Appl. Oral Sci.. Publicado em: 2017-04
-
22. OTIMIZAÇÃO DA SÍNTESE DE HIDROGÉIS NANOCOMPÓSITOS INTERCALADOS PARA POSSÍVEL APLICAÇÃO NA ÁREA MÉDICA
In this study, the hydrogel formulations based on polysaccharide sodium alginate were investigated for further development of intercalated nanocomposite hydrogels, for purposes of future applications in the areas of health as a carrier in drug delivery systems. Thus, the objective of the work dealt with in the optimization of hydrogels synthesis and obtainin
Quím. Nova. Publicado em: 2017-01
-
23. Preparation and properties of aromatic polyester/TiO2 nanocomposites from polyethylene terephthalate
The development of polyester based materials with enhanced properties as well as the use of post- consumer plastics as raw material has been an increasing market demand. This work aims the synthesis and characterization of aromatic polyesters/titanium dioxide nanocomposites from PET and using TiO2 (0, 1, 3 and 5% w/w) as filler by in situ polymerization. The
Mat. Res.. Publicado em: 05/02/2016
-
24. Fabrication of Cathode Materials Based on Limn2o4/Cnt and Lini0.5mn1.5o4/Cnt Nanocomposites for Lithium – Ion Batteries Application
AbstractCarbon nanotubes (CNTs) are a promising candidate material for use in lithium batteries due to 1D tubular structure, high electrical, thermal conductivities, and extremely large surface area. In this work, the MWCNTs were purified by dispersion in a mixture of HNO3 and H2SO4acids. The oxidized-MWCNTs were used as conducting addition to prepare a nano
Mat. Res.. Publicado em: 2015-10