Nano Composites
Mostrando 1-12 de 25 artigos, teses e dissertações.
-
1. Estudio de las propiedades, estructurales, morfológicas y ópticas de nanopartículas de Cr2O3 sintetizadas por procesos de combustión de un solo paso y diferentes combustibles
ABSTRACT This research presents a novel one–step solution combustion synthesis to obtain nano-structured Cr2O3 from chrome nitrate solution and one fuel such as aspartic acid (Asp) or Lysine (Lys), or Autor Restrihydroxymethylaminomethane (Tris) or ethylenediaminetetraacetic acid (Edta). Once obtained, the ashes were calcined at 500°C. The powders were ch
Matéria (Rio J.). Publicado em: 16/09/2019
-
2. Effect of moringa and bagasse ash filler particles on basalt/epoxy composites
Abstract This study evaluated the effect of moringa and nano ash filler particles on mechanical, chemical corrosion and moisture absorption of basalt fiber/epoxy composites. Epoxy resin and Araldite HY951 hardener was used as matrix along with the inclusion of filler particles while the bi-directional woven basalt fiber mat was used as the reinforcement in f
Polímeros. Publicado em: 09/09/2019
-
3. OPTIMIZATION OF LIPASE IMMOBILIZATION ON MAGHEMITE AND ITS PHYSICO-CHEMICAL PROPERTIES
ABSTRACT Nanomaterial-based biocatalysts have emerged as current carriers suitable for enzyme immobilization. The nano-sized materials provide large surface area for enzyme attachment, thus increasing the probability for its efficient catalyst activity. By using magnetized nanomaterials, enhancement of the downstream processing is evident as it eases the imm
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
4. Baker’s yeast-MnO2 composites as biosorbent for Malachite green: An ecofriendly approach for dye removal from aqueous solution
Resumo Neste estudo, compósitos de MnO2-levedura de pão, produzidos pela oxidação direta da levedura com KMnO4 sob condições ácidas, foram usados como biossorvente para remover o corante trifenilmetano verde Malaquita (VM) de solução aquosa. Os parâmetros que influenciam o processo de adsorção tais como pH, tempo de contato, temperatura, concentr
Rev. Ambient. Água. Publicado em: 07/01/2019
-
5. Experimental Multi-scale analysis of Carbon/Epoxy Composites Nano-Reinforced by Carbon Nanotubes/Multi-layer Graphene
Nano-size structures, nanotubes/multi-layer graphene (CNT/MLG), were dispersed into epoxy system by a combination of sonication and high shear mixing. To avoid CNT/MLG agglomeration, a non-covalent functionalization were performed using surfactants, CO890 - Polyoxyethylene (40) nonylphenyl ether and SDBS - sodium dodecyl benzene sulfonate. Raman spectroscopy
Mat. Res.. Publicado em: 22/01/2018
-
6. The effect of silver nanoparticles on composite shear bond strength to dentin with different adhesion protocols
Abstract In Dentistry, restorative materials and oral bacteria are believed to be responsible for restoration failure. To make long-lasting restorations, antibacterial agents should be made. Inorganic nanoparticles and their nano composites are applied as good antibacterial agents. Objective The purpose of this study was to investigate the effect of silver
J. Appl. Oral Sci.. Publicado em: 2017-08
-
7. Influence of chemical degradation and abrasion on surface properties of nanorestorative materials
Aim: The aim of this in vitro study was to investigate the synergistic effect of chemical degradation (erosion) and three-body abrasion (mechanical degradation) on the surface roughness (Ra) and hardness (KHN) of two nanorestorative materials and two conventional materials.
Methods: Disc-shaped specimens
Braz. J. Oral Sci.. Publicado em: 2015-06
-
8. Photocatalytic degradation of polypropylene/TiO2 nano-composites
In this research, we have investigated the photocatalytic degradation of carbon-coated TiO2 nanoparticles in polypropylene-based nano-composites. For this purpose, polypropylene-based nano-composites were prepared using carbon-coated TiO2 nanoparticles and commercially available TiO2 nanoparticles (Degussa, P25). Our results from SEM, FTIR, and tensile tests
Mat. Res.. Publicado em: 05/08/2014
-
9. Ag ion decoration for surface modifications of multi-walled carbon nanotubes
The production of high performance metal matrix composites depends on a proper design of the surface of the reinforcing phase, ensuring a good contact with a metal phase. In the present work, two Ag decorating procedures to modify the surface of multi-walled carbon nanotubes (MWCNT) were evaluated for further production of aluminum matrix composites. The pro
Mat. Res.. Publicado em: 11/03/2014
-
10. Elastic wave propagation in nano-composites with random distribution of spherical inclusions
In the present study, efforts have been made to theoretically study the diffraction of plane harmonic compressional waves by a spherical nano-inclusion based on the Gurtin-Murdoch surface/interface elasticity theory in which the interface between the nano-inclusion and the matrix is considered as the material surface which has their own mechanical properties
Lat. Am. j. solids struct.. Publicado em: 2013-07
-
11. Nano-engineered composites: interlayer carbon nanotubes effect
The concept of carbon nanotube interlayer was successfully introduced to carbon fiber/epoxy composites. This new hybrid laminated composites was characterized by Raman spectroscopy, X-ray diffraction, scanning electron microscopy and tensile tests. An increase on peak stress close to 85% was witnessed when CNTs interlayer with 206.30 mg was placed to carbon
Mat. Res.. Publicado em: 05/03/2013
-
12. Nano-modified adhesive by graphene: the single lap-loint case
This paper addresses the performance study on, low viscosity, nano-modified adhesives by graphene. For achieving this goal, single-lap joints following ASTM D 5868-01 were manufactured and tested. X-ray diffraction, scanning electron microscopy and nanoindentation were employed for graphene based nanostructures characterization. The increase on joint strengt
Mat. Res.. Publicado em: 19/02/2013