Multi Objective Optimization
Mostrando 13-24 de 80 artigos, teses e dissertações.
-
13. Multi-objective optimization of a parallel manipulator for the design of a prosthetic arm using genetic algorithms
Abstract This paper presents a synthesis of a spherical parallel manipulator for a shoulder of a seven-degrees-of-freedom prosthetic human arm using a multi-objective optimization. Three design objectives are considered, namely the workspace, the dexterity, and the actuators torques. The parallel manipulator is modelled considering 13 design parameters in a
Lat. Am. j. solids struct.. Publicado em: 14/05/2018
-
14. Multi-Objective Curing Cycle Optimization for Glass Fabric/Epoxy Composites Using Poisson Regression and Genetic Algorithm
In this study, a multi-parameter design of experiments, using Taguchi method, has been conducted in order to investigate the optimum curing conditions for glass fabric/epoxy laminated composites, followed by a statistical analysis and genetic algorithm optimization. Heating rate a, temperature T1 and duration h1 were treated as independent variables in a L25
Mat. Res.. Publicado em: 01/02/2018
-
15. AND SOLUTION METHOD TO A SIMULTANEOUS ROUTE DESIGN AND FREQUENCY SETTING PROBLEM FOR A BUS RAPID TRANSIT SYSTEM IN COLOMBIA
ABSTRACT We propose a model and solution method to a simultaneous route design and frequency setting problem on a main corridor from one of the Bus Rapid Transit (BRT) Systems of Colombia. The proposed model considers objectives of users and operators in a combinatorial multi-objective optimization framework and takes into account real constraints on the ope
Pesqui. Oper.. Publicado em: 2017-08
-
16. Multi-objective Optimization of Supercritical Water Gasification of Leftover Brazilian Ginseng Roots After Phytochemical Recovery Steps
Abstract The present study aims at studying the supercritical water gasification (SCWG) of leftover Brazilian ginseng roots after phytochemicals extraction for synthetic natural gas (SNG) production, envisioning the development of a promising Brazilian ginseng roots valorization using sub/supercritical fluids in different steps. A multi-objective energetic-e
Braz. J. Chem. Eng.. Publicado em: 2017-07
-
17. Energy Efficient Clustering in Multi-hop Wireless Sensor Networks Using Differential Evolutionary MOPSO
ABSTRACT The primary challenge in organizing sensor networks is energy efficacy. This requisite for energy efficacy is because sensor nodes capacities are limited and replacing them is not viable. This restriction further decreases network lifetime. Node lifetime varies depending on the requisites expected of its battery. Hence, primary element in constructi
Braz. arch. biol. technol.. Publicado em: 23/01/2017
-
18. NSGA-II-Based Multi-objective Mission Planning Method for Satellite Formation System
ABSTRACT This study proposes a non-dominated sorting genetic algorithm-II-based multi-objective optimization method to solve the multi-objective mission planning problem for satellite formation flying system which has the ability to obtain both digital elevation map and ground moving target indicator information at the same time when certain conditions are s
J. Aerosp. Technol. Manag.. Publicado em: 2016-12
-
19. Structure Comparison and Optimal Design of 6-RUS Parallel Manipulator Based on Kinematic and Dynamic Performances
Abstract The effects of distinctive parameters such as revolute joint angle or spherical joint location of mobile platform in a 6-DOF 6-RUS parallel manipulators on workspace, kinematic, and dynamic indices are investigated in this study to select proper structure commensurate with performance. Intelligent multi-objective optimization method is used to desig
Lat. Am. j. solids struct.. Publicado em: 2016-12
-
20. Robust Multi-objective Optimization Applied to Engineering Systems Design
Abstract In engineering systems design, theoretical deterministic solutions can be hardly applied directly to real-world scenarios. Basically, this is due to manufacturing limitations and environmental conditions under which the real system will operate. Therefore, a small variation in the design variables vector can result in a meaningful change on the theo
Lat. Am. j. solids struct.. Publicado em: 2016-09
-
21. TUNING OF MODEL PREDICTIVE CONTROL WITH MULTI-OBJECTIVE OPTIMIZATION
Abstract Two multi-objective optimization based tuning methods for model predictive control are proposed. Both methods consider the minimization of the error between the closed-loop response and an output reference trajectory as tuning goals. The first approach is based on the ranking of the outputs according to their importance to the plant operation and it
Braz. J. Chem. Eng.. Publicado em: 2016-06
-
22. An Implementation of Self-Organizing Maps for Airfoil Design Exploration via Multi-Objective Optimization Technique
ABSTRACT Design candidates obtained from optimization techniques may have meaningful information, which provides not only the best solution, but also a relationship between object functions and design variables. In particular, trade-off studies for optimum airfoil shape design involving various objectives and design variables require the effective analysis t
J. Aerosp. Technol. Manag.. Publicado em: 2016-06
-
23. Developing and Multi-Objective Optimization of a Combined Energy Absorber Structure Using Polynomial Neural Networks and Evolutionary Algorithms
Abstract In this study a newly developed thin-walled structure with the combination of circular and square sections is investigated in term of crashworthiness. The results of the experimental tests are utilized to validate the Abaqus/ExplicitTM finite element simulations and analysis of the crush phenomenon. Three polynomial meta-models based on the evolved
Lat. Am. j. solids struct.. Publicado em: 2016
-
24. DEVELOPMENT OF A HYBRID FUZZY GENETIC ALGORITHM MODEL FOR SOLVING TRANSPORTATION SCHEDULING PROBLEM
ABSTRACT There has been an increasing public demand for passenger rail service in the recent times leading to a strong focus on the need for effective and efficient use of resources and managing the increasing passenger requirements, service reliability and variability by the railway management. Whilst shortening the passengers’ waiting and travelling time
JISTEM J.Inf.Syst. Technol. Manag.. Publicado em: 2015-12