Multi Element Analysis
Mostrando 13-24 de 66 artigos, teses e dissertações.
-
13. Flexible Multibody Dynamics Finite Element Formulation Applied to Structural Progressive Collapse Analysis
Abstract This paper presents a two-dimensional frame finite element methodology to deal with flexible multi-body dynamic systems and applies it to building progressive collapse analysis. The proposed methodology employs a frame element with Timoshenko kinematics and the dynamic governing equation is solved based on the stationary potential energy theorem wri
Lat. Am. j. solids struct.. Publicado em: 2017-01
-
14. Parametric Modal Study and Optimization of the Floor Pan of a B-Segment Automotive Using a Hybrid Method of Taguchi and a Newly Developed MCDM Model
Abstract The floor pan is an important component that connects the front and rear segments of the automotive underbody structure. Global stiffness and NVH characteristics of BIW are highly dependent to shape, thickness and mass of the body panels and could be evaluated by modal characteristics of these panels. The feeling of solidness and comfort of passenge
Lat. Am. j. solids struct.. Publicado em: 2016-12
-
15. Finite Element Study on Continuous Rotating versus Reciprocating Nickel-Titanium Instruments
Resumo As limas rotativas GTX e ProTaper foram comparadas numericamente com as limas reciprocatórias WaveOne pela análise de elementos finitos, com o objetivo de baixar custos, comparação fiel e exata, além de pesquisar o efeito do projeto das limas e de seu material sobre a durabilidade. Dois modelos tridimensionais de análise de elementos finitos for
Braz. Dent. J.. Publicado em: 2016-08
-
16. An Evaluation of the Use of Formic Acid for Extraction of Trace Elements from Brazil Nut and Babassu Coconut and Its Suitability for Multi-Element Determination by ICP-MS
Formic acid extractions of Brazil nut and babassu coconut samples were undertaken prior to determination of Al, As, Ba, Co, Cr, Cu, Mn, Mo, Ni, Pb, Se, Sr, V and Zn in their meat and oil portions by inductively coupled plasma mass spectrometry (ICP-MS) in an effort to accomplish a first order fractionation of the trace elements between these two components.
J. Braz. Chem. Soc.. Publicado em: 2016-06
-
17. Developing and Multi-Objective Optimization of a Combined Energy Absorber Structure Using Polynomial Neural Networks and Evolutionary Algorithms
Abstract In this study a newly developed thin-walled structure with the combination of circular and square sections is investigated in term of crashworthiness. The results of the experimental tests are utilized to validate the Abaqus/ExplicitTM finite element simulations and analysis of the crush phenomenon. Three polynomial meta-models based on the evolved
Lat. Am. j. solids struct.. Publicado em: 2016
-
18. High Order Impact Elastic Analysis of Circular Thick Cylindrical Sandwich Panels Subjected to Multi-mass Impacts
Abstract This study dealt with the dynamic model of composite cylindrical sandwich panels with flexible cores and simply supported boundary conditions under low velocity impacts of multiple large or small masses using a new improved higher order sandwich panel theory (IHSAPT). In-plane stresses were considered for the core and face sheets. Formulation was ba
Lat. Am. j. solids struct.. Publicado em: 2015-12
-
19. Multi-model finite element scheme for static and free vibration analyses of composite laminated beams
Abstract A transition element is developed for the local global analysis of laminated composite beams. It bridges one part of the domain modelled with a higher order theory and other with a 2D mixed layerwise theory (LWT) used at critical zone of the domain. The use of developed transition element makes the analysis for interlaminar stresses possible with si
Lat. Am. j. solids struct.. Publicado em: 2015-11
-
20. Green's function based finite element formulations for isotropic seepage analysis with free surface
Abstract A solution procedure using the Green's function based finite element method (FEM) is presented for two-dimensional nonlinear steady-state seepage analysis with the presence of free surface in isotropic dams. In the present algorithm, an iteration strategy is designed to convert the over-specified free surface problem to a regular partial differentia
Lat. Am. j. solids struct.. Publicado em: 2015-10
-
21. Multi objective optimization of foam-filled circular tubes for quasi-static and dynamic responses
AbstractFuel consumption and safety are currently key aspects in automobile design. The foam-filled thin-walled aluminium tube represents a potentially effective material for use in the automotive industry, due to its energy absorption capability and light weight. Multi-objective crashworthiness design optimization for foam-filled double cylindrical tubes is
Lat. Am. j. solids struct.. Publicado em: 2015-06
-
22. Topological derivative-based topology optimization of structures subject to multiple load-cases
AbstractThe topological derivative measures the sensitivity of a shape functional with respect to an infinitesimal singular domain perturbation, such as the insertion of holes, inclusions or source-terms. The topological derivative has been successfully applied in obtaining the optimal topology for a large class of physics and engineering problems. In this p
Lat. Am. j. solids struct.. Publicado em: 2015-05
-
23. Load Bearing Capacity of a Dented Aluminum Pipe Subjected to Internal Pressure Considering the Effect of Ductile Damage
AbstractIn this paper, the effect of ductile damage on the behavior of a dented Aluminum pipe subjected to internal pressure is investigated. The plastic behavior of pipes under indentation is studied using continuum damage mechanics theory and the elastic-plastic finite element analysis. Finite element calculations are carried out using the damage plasticit
Lat. Am. j. solids struct.. Publicado em: 2015-04
-
24. Physical and geometrical non-linear analysis of plane frames considering elastoplastic semi-rigid connections by the positional FEM
This study presents an alternative Finite Element formulation based on positions to model plane frames considering geometrical non-linear and elastoplastic behavior for members and semi-rigid connections. The formulation includes shear effects and allows the consideration of important mechanical behavior of structures in design decisions and verifications. T
Lat. Am. j. solids struct.. Publicado em: 2014-12