Mortar Coating
Mostrando 1-12 de 21 artigos, teses e dissertações.
-
1. Mesh reinforcement in masonry mortar coatings: a systematic literature review
Abstract Mortar coatings have a major influence on a building’s aesthetics, valorization, and habitability, with significant effects on the mechanical behavior of masonry walls. Multiple types of meshes can be embedded in plaster to enhance both masonry and coating’s mechanical behavior, restrain crack formation, enhance the bonding between layers, and i
Cerâmica. Publicado em: 2023
-
2. Methodology for evaluation of the influence of roughness and capillary absorption of ceramic blocks on the render’s tensile bond strength
Abstract The literature indicates that it is difficult or even impossible to associate with strong statistical confidence the bond strength of a mortar coating with the properties of the ceramic block, such as roughness and water absorption. In this work, it is assumed that the variability in capillary water absorption and roughness, and the use of methods t
Cerâmica. Publicado em: 2022
-
3. Análise da influência do tipo de agregado miúdo nas características e dosagem de argamassas mistas
Resumo As argamassas de revestimento e assentamento de alvenaria com uso de areia artificial de britagem tem se tornado uma alternativa viável nos últimos anos, contudo têm-se grandes divergências quanto a preceitos de dosagem adequada para esses materiais. Diante disso, este trabalho objetiva estudar argamassas mistas de revestimento e assentamento de a
Ambient. constr.. Publicado em: 03/10/2019
-
4. Statistical analysis of mechanical properties of mortars with fly ash and waste tire rubber
Resumo Este artigo tem como objetivo efetuar a análise estatística dos efeitos da inclusão da borracha de pneus inservíveis e cinza volante oriunda de usinas termelétricas como componentes da argamassa para revestimento de edificações. Foram produzidas argamassas de referência e argamassas contendo borracha com dimensão máxima dos grãos de 0,71 mm
Rev. IBRACON Estrut. Mater.. Publicado em: 23/09/2019
-
5. Glycerol Effect on the Corrosion Resistance and Electrodeposition Conditions in a Zinc Electroplating Process
Zinc electrodeposition is an economical process of Zn coating compared to conventional galvanic process. The galvanizing process is used in various industrial sectors to protect ferrous alloys during the corrosion process. In buildings, the galvanizing process is widely used to coat mortar protective screens. The electrodeposition of zinc has a relatively lo
Mat. Res.. Publicado em: 19/08/2019
-
6. Mechanical properties of mortar produced with the replacement of natural sand by scheelite residue
Resumo O resíduo gerado pelas atividades industriais representa um custo, já que os geradores são responsáveis pela sua gestão, transporte, tratamento e disposição. O estado do Rio Grande do Norte, Brasil, é o maior produtor de resíduos de scheelita. O objetivo desta pesquisa foi caracterizar este resíduo de mineração, identificar sua similaridad
Cerâmica. Publicado em: 15/08/2019
-
7. Thermal simulation of prisms with concrete blocks in a fire situation
Resumo O presente trabalho tem como objetivo verificar a capacidade de isolamento térmico de alvenarias constituídas por blocos de concreto em situação de incêndio por meio da simulação térmica de prismas. Inicialmente, para a validação das propriedades térmicas do bloco com um experimento fornecido por uma empresa, foi simulado um prisma com reve
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
8. Quality analysis of galvanized pipes applied to natural gas installations in civil construction
ABSTRACT Some natural gas distributors for residential and commercial buildings in Brazil use galvanized steel tubes and fittings manufactured by the hot-dip zinc process that are supported by the specifications contained in the Brazilian Standards. Zinc coating is one of the most widely used methods to provide protection against corrosion. It is therefore e
Matéria (Rio J.). Publicado em: 10/06/2019
-
9. Influência da espessura de revestimentos de argamassa no desempenho acústico de alvenarias de blocos cerâmicos
Resumo Percebe-se uma maior preocupação com o desempenho das edificações habitacionais após a publicação da NBR 15575 (ABNT, 2013a), tornando indispensável a avaliação e possível adequação de sistemas construtivos e seus materiais para atendimento dos requisitos. Dentre as imposições relativas à habitabilidade, encontra-se o desempenho acúst
Ambient. constr.. Publicado em: 2019-04
-
10. Industrial Wastes as Alternative Mineral Addition in Portland Cement and as Aggregate in Coating Mortars
This paper presents an evaluation study of wastes from pulp and paper as well as construction and demolition industries for application in cement-based materials. The alternative raw materials were used as a source of calcium carbonate (CaCO3) and as pozzolanic material (water-reactive SiO2) in partial replacement of Portland cement. In addition to the hydra
Mat. Res.. Publicado em: 04/09/2017
-
11. Experimental Study of the Compressive Strength of Multi-Coat Renders
Mortar compressive strength is a standard requirement and should be tested on stand-ardized specimens with a 40 mm square cross section. However, these specimens with only one type of mortar (base-coat layer) do not represent the render traditionally ap-plied to façades since that must consist of at least two layers (base coat and top coat, with different f
Mat. Res.. Publicado em: 13/07/2017
-
12. Estudo do uso do agregado miÃdo reciclado de concreto na produÃÃo de argamassa para revestimento vertical / Study of the use of recycled aggregate concrete in the production of mortar for coating vertical
The utilization of fine recycled aggregate originated from concrete debris recycling presents economics advantages, once recycled fine aggregate has lower costs than natural fine aggregate. Besides, there is an environmental gain due to the replacement of natural fine aggregate by recycled aggregate resulting in a in a reduction of damage caused by irregular
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/11/2011