Mortar Bedding
Mostrando 1-4 de 4 artigos, teses e dissertações.
-
1. Influência do tipo de argamassamento e da utilização de peças de ajuste dimensional na resistência à compressão da alvenaria de blocos de concreto / Influence of mortar bedding type and use of adjustment dimensional parts in the compressive strength of masonry of concrete blocks
Currently, the structural masonry still has some advantages in the construction industry as compared with conventional systems, however it should continue to be studied for a better utilization of the system. This research studies the change of compressive strength of masonry walls due to the placement of mortar only on the sides of the blocks compared to th
Publicado em: 2011
-
2. Resistência e deformabilidade de blocos vazados de concreto, prismas e paredes e suas correlações com as propriedades mecânicas dos materiais constituintes / Strength and deformability of hollow concrete blocks, prisms and walls and their correlation to mechanical properties of constituent materials
This work aims to identify and correlate the mechanical properties of concrete and bedding mortar to the structural behavior of hollow concrete blocks, prisms and walls, by mean of physical and numerical modeling. A detailed experimental investigation was carried out by assuming as a premise the use of plastic consistency concrete to produce hollow blocks an
Publicado em: 2008
-
3. INFLUENCE OF THE TYPE OF MORTAR BEDDING TO THE COMPRETION RESISTENCE OF SMALL STRUCTURE MANSONRY WALLS / INFLUÊNCIA DO TIPO DE ARGAMASSAMENTO NA RESISTÊNCIA À COMPRESSÃO DE PEQUENAS PAREDES DE ALVENARIA ESTRUTURAL CERÂMICA
O presente trabalho tem com objetivo principal analisar a influência do tipo de argamassamento na resistência à compressão de pequenas paredes de alvenaria estrutural cerâmica. Para o estudo, foram utilizados dois tipos de blocos cerâmicos (paredes maciças e paredes vazadas), três tipos de argamassa (2, 4 e 10 MPa) e dois tipos argamassamento: pleno
Publicado em: 2007
-
4. Resistencia a compressão de paredes de alvenaria estrutural, com blocos assentados com argamassa plena e longitudinal
The two main aims of this work are to verify and analyze the reduction of the compressive strength of structural masonry walls, when the blocks are laid with mortar only in the outside faces of the block (face shell bedding). These verifications and analysis are important because, although the Brazilian code NBR 8798 (1985) still specifies that the entire bl
Publicado em: 2004