Module Of Elasticity
Mostrando 13-24 de 28 artigos, teses e dissertações.
-
13. Evaluation of shrinkage and creep of self-compacting concrete for application in precast elements / Avaliação de retração e fluencias do concreto auto-adensavel para aplicação em elementos pre-moldados
This project analyzed, theoretically and experimentally, the mechanical and rheological behavior of the selfcompacting concrete (C.A.A.), specially its features according to slow deformation, shrinkage and creep, and its applicability in precast elements. Two compositions of concrete of different classes of resistance were developed, 35 MPa and 55 MPa. In th
Publicado em: 2009
-
14. Estudo da influência das adições minerais no comportamento do concreto sob a ação do fogo
The present study assessed the behavior of concrete produced from mineral additions when subjected high temperatures typical occurrence in fire. Representative speciments were shaped using only Portland cement CP V- ARI as binder, and others, with the same amount of binder, but replacement cement by mineral additions like blast furnace slag low reativity, bl
Publicado em: 2008
-
15. Sinterização de finos de resíduos de construção civil: uma contribuição para o desenvolvimento sustentável
The sintering of ore is a metallurgic process, in which iron ore fine, non-iron ore and fusiagent are agglomerates by partial fusion. The product of this process is a porous material that can be used in blast furnace. In this paper, it is assessed the possibility to use the same process to agglomerate demolition and construction waste fine. Samples of fine o
Publicado em: 2008
-
16. ANÁLISE DA RESISTÊNCIA DE PRISMAS E PEQUENAS PAREDES DE ALVENARIA ESTRUTURAL CERÂMICA PARA DIFERENTES TIPOS DE ARGAMASSAS / ANALYSIS OF THE RESISTANCE OF PRISMS AND CERAMIC STRUCTURAL MASONRY SMALL WALLS FOR DIFFERENT TYPES OF MORTARS
Este trabalho tem como objetivo principal analisar a influência da geometria do bloco cerâmico no desempenho mecânico da alvenaria estrutural, sob compressão centrada, quando utilizadas argamassas com resistências variadas. Estudam-se dois tipos de geometrias de blocos cerâmicos: uma de paredes vazadas (BPV) e outra com paredes maciças (BPM), possuind
Publicado em: 2008
-
17. Simulação numérica do comportamento pós-fissuração de vigas de concreto armado pelo método dos elementos finitos / Numerical simulation for the post-cracking behavior of reinforced concrete beams by finite element method
This work presents a numerical method for the evaluation of internal forces and displacements in reinforced concrete straight beams considering cracking and the influence of longitudinal and transversal reinforcement. In order to simulate cracking behavior, the elasticity module of the cracked element is reduced depending on the dimensions of the finite elem
Publicado em: 2007
-
18. Modelagem computacional de um reator anaeróbico fabricado em polietileno de alta densidade rotomoldado / Computational modeling of a anaerobic reactor manufaturated in polyethilene of high density rotomolding
The present work was developed to evaluate the potential of uses of an anaerobic reactor manufactured in HDPE High Density Polyethylene produced by the rotomolding process in substitution to the conventional reactors built in stonemasonry, working in a batch regime and buried in the soil. The state of tensions and the deformations were assessed using the pro
Publicado em: 2007
-
19. Utilização de madeira de eucalipto de pequenas dimensões na fabricação de uma ponte protendida com madeira laminada colada / Use of small-sized eucalyptus wood to build a pre-stressed bridge with glued-laminated timber
This study aimed to build and evaluate the behavior of a highway stress-laminated timber bridge deck measuring 6m in length, 3.5 m width and 0.24 m thickness submitted to a load of 13 t. The deck was built with laminations made from eucalyptus logs of various thinning-originated specimens, with a mean diameter of 2.5 m and ages ranging between 8 and 19. To b
Publicado em: 2007
-
20. Natural degradation of toras and your influence in the properties of the wood five forest species / Degradação natural de toras e sua influência nas propriedades físicas e mecânicas da madeira de cinco espécies florestais
The first part of this work was led from August from 2004 to August 2005. The objective of evaluating the influence of two enviroments: forest and open field, in the durability of recently abated toras of five forest species: Eucalyptus urophylla " Eucalyptus " (Myrtaceae), Melia azedarach L. " Cinamomo " (Meliaceae), Lophantera lactescens Ducke, Lanterneira
Publicado em: 2006
-
21. Avaliação da qualidade da madeira de híbrido clonal de Eucalyptus urophylla x grandis para produtos sólidos. / Avaliation of the wood quality in clonal hybrid of Eucalyptus urophylla x grandis for solids products
The present work had as general objective to study the influence of the growth rate in different silviculturals models in the wood quality of a clonal hybrid of Eucalyptus urophylla x Eucalyptus grandis. The considered effects were two ages (70 and 166 months) in two planting systems (coppice and reform), with three intensities thinning (91, 80,5 and 77,5%).
Publicado em: 2006
-
22. Variation in either the physical and mechanical properties and the quality of the bean (Phaseolus vulgaris L.) during the drying process and storage / Variação das propriedades físicas e mecânicas e da qualidade do feijão (Phaseolus vulgaris L.) durante a secagem e o armazenamento
There is a lack of information in the available literature on the changes that may occur in the bean during the drying process and storage time. Thus, the accomplishment of studies that would generate theoretical and practical information about a better conservation of the product are really relevant. So, this work was carried out to analyze several characte
Publicado em: 2006
-
23. Influencia do tipo de agregado nas propriedades mecanicas do concreto submetido ao fogo / Aggregate types influence in mechanical properties of the concrete submitted to fire
This work deals with aggregate types influence in mechanical properties of the concrete submitted to high temperatures, evaluating the probable alterations to compression and tension resistances and elasticity module. An experimental study of the three chosen aggregates influence is presented, expanded clay, basalt and limestone in the concrete behavior subm
Publicado em: 2005
-
24. Contribution to the study of the application of alternative materials in the composites based on Portland cement : use of polypropylene grains recycled in substitution to the aggregates of the concrete / Contribuição ao estudo da aplicação de materiais alternativos nos compositos a base de cimento Portland : uso de grãos de polipropileno reciclado em substituição aos agregados do concreto
The main objective of this dissertation was the determination of the main mechanical properties of a composite based on Portland cement CP-V-ARI (high initial resistance) tends as aggregate the grains recycled agglutinated of polypropylene (GRAP). The choice of the plastic is due to the fact that it is one of the main materials used by the industry in genera
Publicado em: 2005