Microwave Oven
Mostrando 13-24 de 117 artigos, teses e dissertações.
-
13. Preparation and characterization of a homemade Josephson junction prepared from a thin film sintered in a domestic microwave oven
A homemade Josephson junction was successfully obtained using a superconductor thin film of the BSCCO system. The film was deposited on a lanthanum aluminate, produced from a commercial powder with a nominal composition Bi1.8Pb0.4Sr2CaCu2Ox, was thermally treated by a domestic microwave oven. The XRD analysis of the film indicated the coexistence of Bi-2212
Mat. Res.. Publicado em: 08/03/2016
-
14. Determination of Essential, Non-Essential, and Potentially Toxic Elements in Graviola (Annona muricata L.) Pulp by ICP OES and GF AAS
The determination of essential (B, Ca, Co, Cu, Cr, Fe, K, Li, Mg, Mn, P, S, Se, Si, V, and Zn), non-essential (Al, Ba, Sn, Sr, and Ti), and potentially toxic (As, Cd, and Pb) elements in graviola pulp by inductively coupled plasma optical emission spectrometry (ICP OES) and graphite furnace atomic absorption spectrometry (GF AAS) is proposed. Samples were di
J. Braz. Chem. Soc.. Publicado em: 2015-10
-
15. Blends of ground tire rubber devulcanized by microwaves/HDPE - Part B: influence of clay addition
AbstractThe main objective of this work is to study the influence of clay addition on dynamically revulcanized blends of Ground Tire Rubber (GTR)/High Density Polyethylene (HDPE). GTR was previously devulcanized in a system comprised of a conventional microwave oven adapted with a motorized stirring, with a fixed microwave power and at various exposure times
Polímeros. Publicado em: 2015-08
-
16. DESENVOLVIMENTO DE UM MÉTODO DE PREPARO DE AMOSTRAS PARA AVALIAÇÃO DE MATÉRIAS‑PRIMAS DE MATERIAIS ESCOLARES
The aim of this study was to evaluate the extraction of elements Ba, Cd, Cr, Hg and Pb in solid samples, using a microwave oven with closed flasks and to understand the physicochemical parameters involved in this process. The conducting of this study was based on directive 2009/48/CE, which specifies the levels of elements in the materials used by childre
Quím. Nova. Publicado em: 2015-07
-
17. Blends of ground tire rubber devulcanized by microwaves/HDPE - Part A: influence of devulcanization process
Abstract The main objective of this work is the study of the influence of microwaves devulcanization of the elastomeric phase on dynamically revulcanized blends based on Ground Tire Rubber (GTR)/High Density Polyethylene (HDPE). The devulcanization of the GTR was performed in a system comprised of a conventional microwave oven adapted with a
Polímeros. Publicado em: 2015-06
-
18. Meat Quality of Chicken Breast Subjected to Different Thawing Methods
Freezing is one of the methods to preserve and guarantee the quality of meat until it reaches the consumer. Even though freezing is classified as a mild form of preservation, it causes meat changes resulting from the formation of ice crystals that subsequently affect the tenderness and functionality of meat. The aim of this study was to evaluate the physicoc
Rev. Bras. Cienc. Avic.. Publicado em: 2015-06
-
19. Influence of plaster drying on the amount of residual monomer in heat-cured acrylic resins
AIM: To evaluate the influence of plaster condition, dry or not, on the amount of residual monomer in heat-cured acrylic resin. METHODS: Thirty acrylic resin specimens (65x10x3 mm) were fabricated and randomly assigned to 5 groups (n=6). The evaluated resins were heat-cured acrylic resins by conventional or microwave polymerization techniques and the plaster
Braz. J. Oral Sci.. Publicado em: 2013-06
-
20. Miniprojeto para ensino de Química Orgânica Experimental baseado no acoplamento catalítico N-C promovido por micro-ondas
This paper describes a three-week mini-project for an Experimental Organic Chemistry course. The activities include N-C cross-coupling synthesis of N-(4-methoxyphenyl) benzamide in an adapted microwave oven by a copper catalyst (CuI). Abilities and concepts normally present in practical organic chemistry courses are covered: use of balances, volumetric glass
Quím. Nova. Publicado em: 2013
-
21. ObtenÃÃo das cerÃmicas dielÃtricas BiTRWO6 (TR = Y, Gd ou Nd) por radiaÃÃo de micro-ondas e sua aplicaÃÃo em dispositivos eletrÃnicos / Obtaining Of Ceramic Dielectric BiTRWO6 (Tr = Y, Gd Or Nd) By Microwave Radiation And Its Application In Electronic Devices
The mixture heat of the metal oxides may promote the formation of ceramic materials, depending on their dielectric properties and its crystalline structure may be used with electronic components for a variety of functions in electrical circuits. Heating method is directly related to the material properties. This work aims to use a commercial microwave oven m
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/08/2012
-
22. Copolymer of acrylonitrile and vinyl-imidazole from the chemical modification of polyacrylonitrile / Obtenção do copolímero de acrilonitrila e vinil-imidazol a partir da modificação química da poliacrilonitrila
Polymers containing heterocyclic rings such as imidazole, have a great scientific and commercial interest due to its use in several areas. Such polymers can be obtained by chemical modification of polymers such as polyacrylonitrile commercial. Generally, this type of reaction is carried out by conventional heating (thermal). However, more recently, the micro
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/02/2012
-
23. Linear dimensional change, compressive strength and detail reproduction in type IV dental stone dried at room temperature and in a microwave oven
The type IV dental stone is widely used for the fabrication of dyes and master casts for fixed and removable partial prostheses. It is typically normal to wait at least 24 hours for the casts to dry prior to beginning the laboratory procedures. The waiting time has been shown to be greatly reduced by using microwave drying. OBJECTIVE: This study evaluated th
J. Appl. Oral Sci.. Publicado em: 2012-10
-
24. PROCEDIMENTO VOLTAMÉTRICO OTIMIZADO PARA DETERMINAÇÃO DE Ni2+ EM AMOSTRAS PRÉ-TRATADAS DE BIODIESEL, USANDO ELETRODO MODIFICADO COM FILME DE MERCÚRIO / PROCEDURE OPTIMIZED VOLTAMMETRIC FOR DETERMINATION OF Ni2 + IN PRE-TREATED SAMPLES OF BIODIESEL, USING MODIFIED ELECTRODE WITH FILM OF MERCURY
A presença de metais no biodiesel pode estar relacionada com a matéria-prima, com o processo utilizado para a obtenção do biodiesel ou com sua estocagem e pode provocar reações de oxidação, corrosão e entupimento em motores, além de causar riscos à saúde humana e ao meio ambiente. Neste trabalho, é proposto um procedimento voltamétrico com base
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 04/07/2011