Microcontroller
Mostrando 1-12 de 77 artigos, teses e dissertações.
-
1. Design, development, and implementation of 3D-printed polylactic acid centrifuge rotors for laboratory-scale applications
In this work, self-made laboratory centrifuge equipment was developed for the separation of suspensions and immiscible liquids. This centrifuge was based on the Arduino microcontroller and fabricated from simple and recycled mechanical and electronic parts, spending an inexpensive budget suitably. The centrifuge frame and rotors were manufactured of Polylact
Química Nova. Publicado em: 2022
-
2. Designing and fabrication of a low-cost dip-coater for rapid production of uniform thin films
In this work, a self-made dip-coater equipment was developed for the fabrication of thin films. The assembly of the apparatus was carried out using simple mechanical and electronic pieces, recycle parts, and spending an inexpensive budget suitably. The production, software design, and features of the device were focused on the sol-gel dip-coating method, whi
Química Nova. Publicado em: 2022
-
3. AN ADAPTED UNMANNED AERIAL VEHICLE FOR ENVIRONMENTAL WATER SAMPLING
In this work an unmanned aerial vehicle (UAV) was adapted to be used as an environmental tool to collect water samples of sea, estuary, and mangrove for further analysis by gas chromatography with a mass detector (GC-MS). The sampling automated system was based on a microcontroller, a solenoid valve, and a peristaltic mini-pump that was coupled to a quadcopt
Química Nova. Publicado em: 2022
-
4. The automatic selection of hydraulic spray nozzles based on the psychrometric air conditions in hydropneumatic sprayers
ABSTRACT The aim of the current study is to develop an electronic system capable of automatically replacing hydraulic spray nozzles, based on psychrometric air conditions such as temperature and relative air humidity, in order to help improving the efficiency of application technologies. The system comprised one microcontroller, two solenoid valves, one temp
Rev. Ceres. Publicado em: 2020-02
-
5. Forças no sistema de referência acelerado de um pêndulo: estudo teórico e resultados experimentais
Resumo Neste trabalho realizamos, inicialmente, uma discussão teórica sobre as forças no sistema de referência acelerado de um pêndulo que oscila livre de resistência. Tal discussão propicia a afirmação de que, se um acelerômetro for fixado no centro de oscilação de um pêndulo, ele deverá registrar um valor variável sobre o eixo orientado radi
Rev. Bras. Ensino Fís.. Publicado em: 25/11/2019
-
6. IoT-based measurement system for classifying cow behavior from tri-axial accelerometer
RESUMO: Um sistema de monitoramento de comportamento de vacas baseado na Internet das Coisas (IoT) foi projetado e implementado através do uso de acelerômetro tri-axial, Microcontrolador MSP430, módulo de rádio, frequência sem fio (RF), e um portátil. O sistema implementado mediu o comportamento do movimento da vaca e transmitiu dados de aceleração
Cienc. Rural. Publicado em: 13/06/2019
-
7. Automatized Separation of Fractions from Petroleum Based on Spectrophotometric Signal Derivative Using Open-Source Hardware for the Determination of Ni and V Linked to Porphyrins
An automated method based on open-source hardware was created for the separation of porphyrins fractions from crude oil, an essential step for the quantification of V and Ni as metalloporphyrins. Preparative liquid chromatography was implemented with a reverse phase gradient from MeOH to toluene. The system allows three solvents and fractions changes by usin
J. Braz. Chem. Soc.. Publicado em: 23/05/2019
-
8. Venturino: análise da variação de pressão em um tubo de Venturi utilizando Arduino e sensor de pressão
Resumo Geralmente os laboratórios didáticos das escolas de ensino médio e das instituições de ensino que ofertam graduações em Física e áreas correlatas não possuem equipamentos e/ou práticas experimentais sobre hidrodinâmica. Aplicações de relevância tecnológica tais como o tubo de Pitot ou o tubo de Venturi são estudados, geralmente, como
Rev. Bras. Ensino Fís.. Publicado em: 18/02/2019
-
9. A study of strain and deformation measurement using the Arduino microcontroller and strain gauges devices
Abstract This paper presents a methodology for the measurement of strain by means of strain-gauges, where the data acquisition is done by using an Arduino Uno board, due to the low-cost and the easy manipulation of this microcontrollers. The measured signal conditioning is performed by means of a Wheatstone Bridge and then discretized by an Analog-Digital Co
Rev. Bras. Ensino Fís.. Publicado em: 10/12/2018
-
10. DISTRIBUTION OF MAIZE SEED IN A SEEDING LINE PROTOTYPE USING MICROCONTROLLED DATA ACQUISITION SYSTEMS
ABSTRACT: The aim of this study was evaluate the longitudinal distribution of maize seeds using a seeding line prototype, whit a microcontroller data acquisition system, at different speeds and types of horizontal feeder discs. Initially it was constructed a prototype simulator of seeding line, in the laboratory, and mounted two systems of microcontroller da
Eng. Agríc.. Publicado em: 2017-12
-
11. Dispositivo para medir tiempo y temperatura usando un microcontrolador
In this paper a device of data acquisition with low cost and easy management was developed for using in experiments of physics where time or temperature measurement is required. The device is composed by three main parts: (i) sensors to measure the physical variables of time and temperature; (ii) a data acquisition card with microcontroller to manage command
Rev. Bras. Ensino Fís.. Publicado em: 27/11/2017
-
12. Smart Health Surveillance with Automated Database Using Android Mobile Device
ABSTRACT Smart Health Surveillance system is to measure and display the Electrocardiogram (ECG) and temperature of patient’s body continuously and also to communicate to the doctor. The system measures ECG using infrared sensor and the temperatures at oral and wrist of the patient using temperature sensors. Microcontroller, receives the data from the senso
Braz. arch. biol. technol.. Publicado em: 17/08/2017