Micro Measurement
Mostrando 1-12 de 222 artigos, teses e dissertações.
-
1. A Novel Fully Integrated 4-Bit IFM Subsystem Using Band-Stop Filters
Abstract In this paper a 2-4 GHz microstrip IFM (Instantaneous Frequency Measurement) subsystem that uses Wilkinson power dividers, frequency discriminators based on band-stop filters and a DC arduino section is reported. The device uses band-stop filters as an alternative to delay lines, commonly used for IFM. The resonators are responsible for frequency ad
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-09
-
2. Mechanical behavior of PVD coatings deposited on ADI
ABSTRACT In this work, the mechanical behavior of the coated ADI system is studied. For this purpose, single layer Ti and bilayer Ti/TiN and TiAl/TiAlN coatings, with different thicknesses, were deposited by the PVD technique of cathodic arc deposition on high strength ADI substrates using industrial and experimental devices. The characterization of the coat
Matéria (Rio J.). Publicado em: 25/11/2019
-
3. Effect of Magnification during Post Space Preparation on Root Cleanness and Fiber Post Bond Strength
Resumo Avaliar o efeito do método de visualização durante o preparo do espaço do pino sobre o remanescente de material obturador endodôntico e sobre a resistência adesiva do pino de fibra de vidro. Trinta incisivos centrais superiores humanos com canal radicular circular foram selecionados, foram desobstruídos a 15 mm e obturados. Os dentes foram divi
Braz. Dent. J.. Publicado em: 07/10/2019
-
4. Characterization of Ti-35Nb alloy surface modified by controlled chemical oxidation for surgical implant applications
ABSTRACT Titanium-Niobium alloys have been studied for biomedical applications due to their satisfactory biocompatibility. In order to improve the long-term implantation, surface modification techniques have been developed to generate suitable topography, roughness, chemical composition, surface energy, etc. Considering this approach, the present work aimed
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Development and validation of a data logger for thermal characterization in laying hen facilities
RESUMO O monitoramento ambiental em instalações animais, que inclui o armazenamento de dados coletados de forma robusta, prática e viável, é um desafio constante. O objetivo deste estudo foi desenvolver um data logger confiável para monitorar a temperatura e umidade relativa do ar dos aviários e avaliar a adequação do projeto usando instrumentos pad
Rev. bras. eng. agríc. ambient.. Publicado em: 09/09/2019
-
6. Iron oxide/titania composites for radar absorbing material (RAM) applications
Resumo Compósitos de óxido de ferro/titânia foram sintetizados pelo método de precipitação. A quantidade de óxido de ferro foi variada nos compósitos. Fase única (anatásio) foi obtida para a fração em massa de 0-20% e três fases (anatásio, magnetita e hematita) foram encontradas para as frações de 30% e 40% de óxido de ferro. O tamanho de cr
Cerâmica. Publicado em: 15/08/2019
-
7. Failure Probability, Stress Distribution and Fracture Analysis of Experimental Screw for Micro Conical Abutment
Resumo O objetivo deste estudo foi avaliar a probabilidade de falha de dois tipos de parafusos para pilar protético após a compressão e analisar a distribuição da tensão com o método dos elementos finitos. Sessenta (60) restaurações unitárias foram montadas em implantes de titânio (e-fix, A.S. Technology - Titanium Fix). Os grupos foram divididos
Braz. Dent. J.. Publicado em: 04/04/2019
-
8. Efectos de tratamientos térmicos post-alcalinos sobre las propiedades superficiales de titanio para implantes dentales con diferentes recubrimientos
ABSTRACT Titanium is widely used as dental implant since it is bio-inert and osseointegratable. However, provided that this material cannot induce bone growth from its surface, it is usual to carry out different surface treatments in order to develop bioactive coatings that increase both the initial rate of bone development and the biological anchorage of im
Matéria (Rio J.). Publicado em: 19/07/2018
-
9. Peripheral device to quantify grip and pinch capacity of children
Abstract Introduction Grip and pinch movements are important to perform daily activities and to manipulate objects. In this paper we describe the development and evaluation of a peripheral device to quantify cylindrical grip, pulp-to-pulp pinch, pulp-to-side pinch strength and range of motion of children. Methods Three objects were selected: a door handl
Res. Biomed. Eng.. Publicado em: 26/04/2018
-
10. Effects of Multiple Extrusions on Structure-property Performance of Natural Fiber High-density Polyethylene Biocomposites
Detailed analysis of the effects of multiple extrusions on physical, mechanical, micro-structural as well as dynamic mechanical thermal properties of natural fiber high-density polyethylene (HDPE) composites is reported. Composite materials containing HDPE, wood flour, and Maleic Anhydride polyethylene (MAPE) were manufactured and subjected to a recycling pr
Mat. Res.. Publicado em: 01/02/2018
-
11. Measurement of Activity Coefficients at Infinite Dilution for Alcohols in [BMIM][CH3SO4] using HS-SPME/GC-FID
ABSTRACT The activity coefficient at infinite dilution (&IN1) and distribution ratios at infinite dilution (&IN2) were determined for alkanols (methanol, ethanol, 1-propanol, 1-butanol, 2-butanol, and 2-methyl-2-propanol) in the ionic liquid (IL) 1-butyl-3-methylimidazolium methyl sulfate ([BMIM][CH3SO4]) by HS-SPME (Headspace - Solid Phase Micro Extraction
Braz. J. Chem. Eng.. Publicado em: 2017-07
-
12. Surface Properties Contrast between Al Films and TiO2 Films Coated on Magnesium Alloys by Magnetron Sputtering
Al films and TiO2 films were separately coated on AZ31 magnesium alloy substrates by means of magnetron sputtering method. The surface properties of the samples were explored and compared. Scanning electron microscope (SEM) observed the compact structure characteristics of as-deposited Al films and TiO2 films. After heat treatment under 200ºC for half an ho
Mat. Res.. Publicado em: 20/02/2017