Mgo C
Mostrando 1-12 de 131 artigos, teses e dissertações.
-
1. Sedimentation and rheological behavior of reactive and non-reactive magnesium hydroxide pulps for industrial spray dryer processing
Abstract Two different reactive concentrated magnesium hydroxide (HM) pulps, produced in a lab reactor mill, and a synthetic and non-reactive HM-pulp, for comparative analyses, have been prepared and studied. Sodium polyacrylate was selected as a dispersant for improving the HM pulp fluidity, with concentrations varying from 0.42% to 2.0% on a dry basis. The
Cerâmica. Publicado em: 2023
-
2. Evaluation of the self-healing capacity of ceramics produced with alumina and silicon carbide
Abstract The self-healing capacity of a ceramic material produced by uniaxial pressing with alumina (Al2O3), silicon carbide (SiC), and magnesium oxide (MgO) was evaluated. To assess self-healing, a discontinuity was generated on the surface of the specimens. The healing time in the oven, at a temperature of 1000 ºC, was 1, 30, and 60 min. The specimens wer
Cerâmica. Publicado em: 2022
-
3. Dolomite-zirconia reaction sintered bonded coarse magnesia ceramics: effect of the bonding proportion
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Cerâmica. Publicado em: 2021-06
-
4. Editorial Comment: Luts-V: A new simplified score for assessing lower urinary tract symptoms in men
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
5. Oxidative Stress & Male Infertility - A necessary and conflicted indissociable marriage: How and when to call for evaluation?
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
6. Editorial Comment: Vasectomy re-reversal: effectiveness and parameters associated with its success
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
7. Dysplasia of the fibrous sheath with axonemal and centriolar defects combined with lack of mitochondrial activity as associated factors of ICSI failure in primary ciliary dyskinesia syndrome
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Int. braz j urol.. Publicado em: 2021-06
-
8. Design, Synthesis, and Application of Colored Cobalt Pigments (Pink, Blue, Green)
The combination of white or colorless oxides (MgO, Al2O3, ZnO) with colorant ions (Co2+) generates colored pigments (pink, blue, green). The color is caused by the insertion of the colorant ion in the respective crystal lattices (periclase, alumina, wurtzite), as verified by X-ray diffraction. Absorption spectra in the visible region show analogous triplet b
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
9. Influência do MgO e CaCl 2 nas propriedades reológicas de argilas bentoníticas dos novos depósitos da Paraíba-Brasil utilizando planejamento experimental e análise estatística
Resumo Novos depósitos de argila bentonítica foram descobertos no estado brasileiro da Paraíba, sendo o mais recente no município de Olivedos. Estudos recentes descobriram a presença de altos níveis de minerais não argilosos que podem produzir resultados insatisfatórios ao tentar usar essas argilas em fluidos de perfuração. Para torná-los adequado
Cerâmica. Publicado em: 2020-03
-
10. Caracterização de argilas de novos jazimentos situados em Parelhas/RN, Brasil, visando aplicação na indústria cerâmica
RESUMO O Estado do Rio Grande do Norte, mais especificamente no município de Parelhas, Brasil, a indústria cerâmica já é bastante consolidada, crescendo ano após ano. Entretanto, o estímulo do setor tem provocado acelerada exaustão das jazidas de argilas locais utilizadas pela indústria e, por conseguinte, ameaçando a manutenção da indústria cer
Matéria (Rio J.). Publicado em: 10/06/2019
-
11. Calibration of high-temperature furnace assemblies for experiments between 200 and 600 MPa with end-loaded piston-cylinder apparatuses
Abstract We present pressure calibration results for piston-cylinder –” and 1” high temperature furnace assemblies in the 200-600 MPa range aiming to expand its applicability to simulate upper crustal conditions. The furnace assemblies were made up by crushable MgO, graphite heater, pyrex glass spacer, and NaCl sleeve. Twenty-one experiments were carri
Braz. J. Geol.. Publicado em: 15/04/2019
-
12. Tratamento de lixiviado por processos combinados: coagulação/floculação, air stripping, ozonização e lodo ativado
RESUMO Os lixiviados de áreas de disposição de resíduos municipais apresentam, em geral, alta complexidade, variabilidade, toxicidade, recalcitrância e alta concentração de nitrogênio amoniacal. Neste estudo, aplicaram-se técnicas combinadas para o tratamento de um lixiviado, a saber: coagulação/floculação (C/F), air stripping e ozonização, co
Eng. Sanit. Ambient.. Publicado em: 22/10/2018