Metallic Coating
Mostrando 13-24 de 55 artigos, teses e dissertações.
-
13. Nano-Sized Silver Colloids Produced and Stabilized by Amino-Functionalized Polymers: Polymer Structure-Nanoparticle Features and Polymer Structure-Growth Kinetics Relationships
The synthesis of highly stable silver colloids has been successfully achieved by using reducing/stabilizer amino-functionalized polymers without the aid of any other external agent. The polymer coated inorganic nanoparticles have been detailed characterized via scattering, imaging and UV-Vis spectroscopy. The combination of transmission electron microscopy (
J. Braz. Chem. Soc.. Publicado em: 2017-09
-
14. Characterization and coating stability evaluation of nickel-titanium orthodontic esthetic wires: an in vivo study
Abstract The objective of this study was to compare coating dimensions and surface characteristics of two different esthetic covered nickel-titanium orthodontic rectangular archwires, as-received from the manufacturer and after oral exposure. The study was designed for comparative purposes. Both archwires, as-received from the manufacturer, were observed usi
Braz. oral res.. Publicado em: 21/08/2017
-
15. Evaluation of hydrogen-Induced cracking resistance of the In625 laser coating system on a C-Mn steel substrate
Abstract The corrosion of C-Mn steels in the presence of hydrogen sulfide (H2S) represents a significant challenge to oil production and natural gas treatment facilities. The failure mechanism induced by hydrogen-induced cracking (HIC) in a Inconel 625 coating / C-Mn steel has not been extensively investigated in the past. In the present work, an API 5CT ste
REM, Int. Eng. J.. Publicado em: 2017-06
-
16. Corrosion of Galvanized Steel Under Different Soil Moisture Contents
Galvanized steel has been widely applied in different applications and the industry significantly increased its production in recent years. Some galvanized structures can be completely or partially buried, such as transmission tower footings. The corrosion of these metallic structures is related to the soil chemical and physicochemical properties, which defi
Mat. Res.. Publicado em: 2015-06
-
17. Heterojunction between Al2O3 and SnO2 thin films for application in transparent FET
Alternative materials for use in electronic devices have grown interest in the past recent years. In this paper, the heterojunction SnO2/Al2O3 is tested concerning its use as a transparent insulating layer for use in FETs. The alumina layer is obtained by thermal annealing of metallic Al layer, deposited by resistive evaporation technique. Combination of und
Mat. Res.. Publicado em: 09/09/2014
-
18. Effect of veneering material on the deformation suffered by implant-supported fixed prosthesis framework
Knowing how stresses are dissipated on the fixed implant-supported complex allows adequate treatment planning and better choice of the materials used for prosthesis fabrication. Objectives: The aim of this study was to evaluate the deformation suffered by cantilevered implant-supported fixed prostheses frameworks cast in silver-palladium alloy and coated wi
J. Appl. Oral Sci.. Publicado em: 2014-06
-
19. Preparation of PMMA/hBN composite coatings for metal surface protection
Polyacrylics have been widely used in coatings. However, their application is limited by low corrosion resistance. One way to enhance their properties is the addition of fillers with adequate properties. In this study, composite materials of PMMA and hBN were developed and deposited on steel by dip-coating. The influence of the amount of hBN in the PMMA coat
Mat. Res.. Publicado em: 23/08/2013
-
20. Simulação com o código GEANT4 de medida de espessura de revestimento metálico em metal por XRF / GEANT4 simulation of measure thickness of metallic coating on metal by XRF
Nesta dissertação são apresentados resultados de simulações Monte Carlo de fluorescência de raios X (XRF), utilizando o programa GEANT4, para medidas de espessura de revestimento metálico (Ni e Zn) em base metálica (Fe). As simulações foram feitas para dois tamanhos de espessura para cada metal de revestimento, (5μm e 10μm), com passos de
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 17/09/2012
-
21. Análise de simulantes para produtos ácidos acondicionados em embalagens metálicas / Analysis of simulants to acidic products conditioned in meal package
Tin-plate cans represent most of the cans for canned food. Since they are not inert, during the storage period, interaction occurs with the product and metal dissolution can occur, especially when it is acid food. To minimize this interaction it is used organic coatings, and epoxy-phenolic resin is the the most used. As the foods are complex biochemical syst
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/07/2012
-
22. Síntese de manganita dopada com estrôncio e cobaltita dopada com antimônio e caracterização microestrutural
The great variety of properties of oxides with the perovskite structure allows their application in several fields of technology. Specially, the electrochemical properties and the thermal stability of some of these compounds make these materials the most used in devices for energy generation such as the solid oxide fuel cells (SOFC). SOFC¿s are devices the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
23. Tratamento superficial do aço inoxidável ferrítico com revestimento La0,6Sr0,4CoO3 para aplicação como interconectores em células a combustíveis do tipo ITSOFC
High-temperature solid oxide fuel cells (800-1000°C) are energy power generation, directly converting the chemical energy into electricity by combining fuel and oxygen. With the reduction of SOFC operating temperature into an intermediate temperature range of 600-800 °C, it has become possible to replace conventional ceramics with metallic alloys for inter
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2011
-
24. Revestimentos a base de Ta/Al2O3 produzidos por aspersão térmica sobre substrato metálico / Ta/Al2O3 coatings produced by thermal spray on metallic substrate
Substratos metálicos de aço inox 416 foram revestidos por aspersão térmica em tocha de plasma. Eles foram posicionados a uma distância de 4 e 5 cm em relação ao bocal de saída do jato de plasma. Os materiais de partida utilizados para as deposições foram pós de óxido de tântalo e alumínio. Esses dois pós foram misturados e moídos em moinho de
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 17/09/2010