Metal Recycling
Mostrando 1-12 de 44 artigos, teses e dissertações.
-
1. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
2. Evaluation of Mass Loss in Different Stages of Printed Circuit Boards Recycling Employed in Temperature Controllers
The aim of this work was to evaluate mass loss in each stage of the recycling process for metal recovery from PCBs of controllers and temperature indicators of cold chambers. The stages of process consists of grinding, particle size classification, magnetic and electrostatic separation. It was analyzed 13 kg of PCBs. These PCBs were crushed and ground. The g
Mat. Res.. Publicado em: 02/12/2019
-
3. Corrosion Resistance of Stainless Steel Brackets After Thermal Recycling by Direct Flaming
Abstract Objective: To determine and compare the corrosion resistance (based on the release of nickel and chromium in artificial saliva) of various brands of stainless steel brackets after thermal recycling by direct flaming. Material and Methods: This research study employed 40 stainless-steel maxillary premolar brackets from different brands (Ormco, GAC,
Pesqui. Bras. Odontopediatria Clín. Integr.. Publicado em: 31/10/2019
-
4. First evaluation of semidirect recycling methods for the reclamation of cemented carbides based on a literature survey
ABSTRACT At the moment the industrially applied techniques for cemented carbide reclamation feature several deficiencies. Depending on the process route, obstacles consist in high energy and chemical consumption (indirect recycling methods) or a deterioration of the recycled product in comparison with the primary material (direct recycling approach). Therefo
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Evaluation of recycled MgO-C bricks and dead-burned dolomite fines in setting slag foaming in the electric arc furnace
Abstract Production cost reduction for the Electric Arc Furnace (EAF) technology is strongly dependent on the efficiency of the electrical energy being introduced into the metal bath. Besides EAF technology, the slag foaming process is currently applied to some other equipment for steel production aiming to save energy, productivity improvements, enhance the
REM, Int. Eng. J.. Publicado em: 2018-03
-
6. Effect of Mill Type on Morphology of AA6013 Aluminium Powder
ABSTRACT In conventional recycling method, metal chips are cast after pressing and melting in electric arc furnace. Material loss occurs during the recycling from liquid metal due to the several reasons. Direct recycling method which produces the aluminium powder from aluminium chips using mechanical mill can be an alternative to conventional recycling metho
Matéria (Rio J.). Publicado em: 2016-09
-
7. A Simple Way to Produce γ-Alumina From Aluminum Cans by Precipitation Reactions
Abstract In this paper, a new way for γ-alumina synthesis was proposed, the raw material being aluminum powders obtained by high-energy milling of aluminum cans. This seems a good option for this metal recycling and energy saving, as well as hydrogen production. The materials were prepared by precipitation techniques, in which aluminum powders reacted with
Mat. Res.. Publicado em: 21/07/2016
-
8. BATTERY RECYCLING: EFFECT OF CURRENT DENSITY ON MANGANESE RECOVERY THROUGH ELECTROLYTIC PROCESS
Abstract This work aims to verify the possibility of using depleted batteries as a source of manganese dioxide applying the electrolytic process. An electrolyte solution containing the following metal ions was used: Ca (270 mgL-1), Ni (3.000 mgL-1), Co (630 mgL-1), Mn (115.3 mgL-1), Ti (400 mgL-1) and Pb (20 mgL-1). The production of electrolytic manganese d
Braz. J. Chem. Eng.. Publicado em: 2016-06
-
9. Análise de patentes de tecnologias relacionadas a resíduos de equipamentos elétricos e eletrônicos / Analysis of patents for technologies related to waste electrical and electronic equipment
The problem of solid waste has been touted as one of the most serious to date. The increasing scarcity of land for the establishment of new landfills, combined with the existing limitations for the recovery of non-renewable materials, low degree of implementation of new treatment alternatives and recycling, now represent a major challenge. Therefore, conside
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/02/2012
-
10. Control of chilling tendency in grey cast iron reuse
In grey cast iron remelt and recycling, white iron can result in the cast product if careful control of the chilling tendency is not ensured. Many jobbing foundries are constrained in furnace types and available foundry additives that the operation always results in white irons. This study is towards ensuring grey iron is reproduced from cast iron scrap auto
Mat. Res.. Publicado em: 22/11/2012
-
11. Reciclagem do lixo de informática: uma oportunidade para a química
Recycling and sustainable development are increasing in importance around the world. In Brazil, the new National Policy on Solid Wastes has prompted discussion on the future of electronic waste (e-waste). Brazil generates the greatest amount of e-waste among Latin American countries. Nevertheless complete recycling, including end processing of e-waste, does
Química Nova. Publicado em: 2012
-
12. Green Supply Chain Management: o caso da Indústria Metal Mecânica do Alto Vale do Itajaí - SC
O Green supply Chain Management (GSCM) vem ganhando destaque na academia e nas empresas, como uma filosofia que visa promover ganhos econômicos e ambientais. Na visão de Srivastava (2007) e Routroy (2009), o GSCM é operacionalizado pelas ferramentas Environmental Management System (EMS) tratado como Sistema de Gestão Ambiental (SGA), Logística Reversa,
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/06/2011