Metal Forming
Mostrando 13-24 de 156 artigos, teses e dissertações.
-
13. Biofilm Formation and Corrosion on Carbon Steel API 5LX60 in Clayey Soil
Corrosion of buried pipelines is a matter of concern to the oil and gas industry since the time when carbon steel began to be widely used in these pipelines for the transportation of fluids. The microbial communities associated with biofilms promote modification in the surrounding environment and may accentuate the degradation of oil and gas pipelines causin
Mat. Res.. Publicado em: 19/04/2018
-
14. Study of Glass Forming on Cu60.0Zr32.5Ti7.5 Alloy by Molecular Dynamics Simulation
This paper presents the results of Molecular Dynamics (MD) simulations of Cu60.0Zr32.5Ti7.5 alloy through the open source code LAMMPS. Amorphous samples were produced by quenching the molten metal from 2300 to 300 K. The pair distribution functions of the liquid and solid were calculated. Moreover, the atomic short-range order at 800, 700 and 300 K was obtai
Mat. Res.. Publicado em: 21/12/2017
-
15. Investigation of Electromagnetic Radiation Emission during Sheet Metal Incremental Micro Forming
Edge dislocations within the plastic zone ahead of a crack tip form accelerated electric line dipoles which give rise to the electromagnetic radiation (EMR) emissions in metal and alloys. This paper reports an experimental investigation to determine EMR radiation during incremental microforming of a thin aluminum sheet. The EMR signals emit from aluminum gra
Mat. Res.. Publicado em: 18/12/2017
-
16. Algorithmic Formulations of Evolutionary Anisotropic Plasticity Models Based on Non-Associated Flow Rule
Abstract In the present paper, orthotropic elasto-plastic constitutive formulations for sheet metal forming based on non-associated flow rule that assume distortion of yield function/plastic potential with ongoing deformation process are analyzed. The yield function/plastic potential are considered as two different functions with functional form as orthotrop
Lat. Am. j. solids struct.. Publicado em: 2017-10
-
17. The Evaluation of Process Parameters on Springback in V-bending Using the Flexforming Process
One of the most significant problems in bending sheet metals is the springback behavior caused by the elastic stress formed after the bending process. In this study, the effects of forming pressure, die angle and holding time on the springback behavior were experimentally investigated for V-bending using the flexforming process. Furthermore, springback behav
Mat. Res.. Publicado em: 24/07/2017
-
18. Protic Ionic Liquids Used as Metal-Forming Green Lubricants for Aluminum: Effect of Anion Chain Length
Among the applications for protic ionic liquids (PILs), lubrication is one of the newest and the most promising. In this work, ammonium-based protic ionic liquids were tested as lubricant fluids for aluminum-steel contacts. PILs were synthesized with 2-hydroxyethylamine (2HEA) and a carboxylic acid (formic and pentanoic), aiming to understand the effect of t
Mat. Res.. Publicado em: 03/04/2017
-
19. Chemical-Mineralogical Characterization of Magnetic Materials from Magnetic Soils of the Southern Espinhaço Mountain Chain and of the Upper Jequitinhonha Valley, State of Minas Gerais, Brazil
ABSTRACT In the Southern Espinhaço Mountain Chain and in the Upper Jequitinhonha Valley, magnetic soils, in different pedogenetic stages, are found to be forming over intrusions of basic lithology. The essential chemical and mineralogical properties of samples from magnetic soil profiles from those two physiographic environments in the state of Minas Gerais
Rev. Bras. Ciênc. Solo. Publicado em: 27/03/2017
-
20. Supramolecular Approach to Decorate Multi-Walled Carbon Nanotubes with Negatively Charged Iron(II) Complexes
Poly(4-vinylpyridine) (P4VP) and P4VP/pentacyanoferrate(II) metallopolymer were used to suspend up to 1 mg mL-1 of multi-walled carbon nanotubes (MWCNT) in ethanol/water mixtures, providing noncolavent decoration of MWCNT with electroactive iron complex. The major interaction between polymer side chains and nanotubes is via π-π stacking, rather than charge
J. Braz. Chem. Soc.. Publicado em: 2017-01
-
21. The Effect of Humic Acid Substances on the Thyroid Function and Structure in Lead Poisoning
ABSTRACT Lead (Pb) is a heavy metal, which adversely affects thyroid gland function and structure. Due to its high molecular weight and abundant functional groups, humic acid substances (HAS) can form chelates with heavy metals. The experiment was conducted to evaluate the prophylactic effect of HAS on thyroid hormone levels and histopathological lesions of
Rev. Bras. Cienc. Avic.. Publicado em: 2016-12
-
22. Parameters Determination of Yoshida Uemori Model Through Optimization Process of Cyclic Tension-Compression Test and V-Bending Springback
Abstract In recent years, the studies on the enhancement of the prediction capability of the sheet metal forming simulations have increased remarkably. Among the used models in the finite element simulations, the yield criteria and hardening models have a great importance for the prediction of the formability and springback. The required model parameters are
Lat. Am. j. solids struct.. Publicado em: 2016-10
-
23. Effect of silver nanoparticles on the physicochemical and antimicrobial properties of an orthodontic adhesive
ABSTRACT Orthodontic treatment with fixed brackets plays a major role on the formation of white spot lesions. Objective This study aimed to incorporate silver nanoparticle solutions (AgNP) in an orthodontic adhesive and evaluate its physicochemical and antimicrobial properties. Material and Methods Silver nanoparticle solutions were added to a commercial
J. Appl. Oral Sci.. Publicado em: 2016-08
-
24. CALCULATION OF CONDITIONAL EQUILIBRIUM IN SERIAL MULTIPLE PRECIPITATION OF METAL SULFIDES WITH HYDROGEN SULFIDE STREAM GENERATED FROM SODIUM SULFIDE: A DIDACTIC TOOL FOR CHEMISTRY TEACHING
Hydrogen sulfide is presented in textbooks as toxic, environmentally unacceptable species, however some positive effects in human metabolism were discovered in the last decades. It is important to offer students also some new information about this compound. As didactic tool in this case may serve serial precipitation of Cd2+, Cu2+, Zn2+, Mn2+ and Pb2+ ions
Quím. Nova. Publicado em: 2016-07