Metal Coating
Mostrando 13-24 de 98 artigos, teses e dissertações.
-
13. Effect of the Incorporation of Micro and Nanocellulose Particles on the Anticorrosive Properties of Epoxy Coatings Applied on Carbon Steel
Polymeric coatings may act as a physical barrier between the aggressive ions and the metal substrate. However, prolonged exposure may cause damage to the polymer coating, leading to a continuous reduction of the barrier effect and consequently loss of the corrosion protection. The objective of this study is to determine the effect of aminopropyltriethoxysila
Mat. Res.. Publicado em: 22/10/2018
-
14. Síntesis y caracterización de “tanatos” de lantano como inhibidores de la corrosión
ABSTRACT Tannins are polyphenols synthesized by plants. They are found in Quebracho (Schinopsis Balansae) wood, Tara (Caesalpinia spinosa) fruits, etc. They have been incorporated in the coating industry as "antifouling" agents and as corrosion inhibitors in acidic solutions. Moreover, lanthanum solutions have a great inhibitory effect over SAE 1010 steel co
Matéria (Rio J.). Publicado em: 19/07/2018
-
15. Carbon based DLC films: Influence of the processing parameters on the structure and properties
ABSTRACT Hydrogenated carbon-based films, such as DLC (“Diamond Like Carbon”), have interesting properties such as excellent tribological behavior, low friction coefficient, high superficial hardness and good wear resistance; they are chemically inert and highly corrosion resistant. They are deposited by means of PACVD (plasma-assisted chemical vapor dep
Matéria (Rio J.). Publicado em: 19/07/2018
-
16. Analysis of substrate coverage of hybrid halide perovskite thin films deposited on glass
ABSTRACT In this work we have studied coverage characteristics of organo-metal lead halide perovskite thin films deposited through the spin-coating technique onto glass substrates that were subjected to different predeposition treatments. Samples were deposited at room temperature using different spinning speeds and two different solvents, namely, dimethylfo
Matéria (Rio J.). Publicado em: 19/07/2018
-
17. Fabricación de recubrimientos compuestos de Bioglass®/poli(ɛ-capro-lactona) obtenidos por co-deposición electroforética sobre acero inoxidable
ABSTRACT In this work two kinds of "soft coatings" were obtained by co-electrophoretic deposition technique (co-EPD). In all cases a bioglass was used as inorganic phase, and a commercial poly(ɛ-caprolactone), (PCLC), and an anionic synthesized PCL modified with maleic anhydride (PCLS) were used as organic phase. To ensure an adequate coating over the metal
Matéria (Rio J.). Publicado em: 19/07/2018
-
18. Obtención y caracterización de recubrimientos de biovidrio sobre la aleación de Mg AZ31
ABSTRACT The ideal material for a metal bone prosthesis must undergo a gradual corrosion in vivo, without releasing toxic components, while acting as a support and facilitating the growth of bone tissue, until a replacement is completed by the regenerated bone. . Biodegradable magnesium alloys have been studied because of their excellent mechanical propertie
Matéria (Rio J.). Publicado em: 19/07/2018
-
19. Extensión de durabilidad de pistones de bombas de fractura hidráulica mediante el empleo de tecnología de nitruración por plasma y PVD
ABSTRACT Hydraulic stimulation technique consists of "fracturing" the formation (rock reservoirs) through pumping a fracturing fluid downhole. This operation is performed by using hydraulic fracturing pumps. The pistons of these pumps are mechanical components performing the intake and compressing fracture fluid by reciprocating action. During this alternati
Matéria (Rio J.). Publicado em: 19/07/2018
-
20. First evaluation of semidirect recycling methods for the reclamation of cemented carbides based on a literature survey
ABSTRACT At the moment the industrially applied techniques for cemented carbide reclamation feature several deficiencies. Depending on the process route, obstacles consist in high energy and chemical consumption (indirect recycling methods) or a deterioration of the recycled product in comparison with the primary material (direct recycling approach). Therefo
Matéria (Rio J.). Publicado em: 19/07/2018
-
21. Caracterización del comportamiento frente a la corrosión en soldaduras de recargue de aceros inoxidables superdúplex
ABSTRACT Superduplex stainless steels have a dual structure constituted approximately by 50% of ferrite and 50 % of austenite. This fact produces a good combination of mechanical properties and corrosion resistance. Thanks to these features their use is growing, mainly in the industries of paper, chemical, gas and oil. Surfacing welding is used for the manuf
Matéria (Rio J.). Publicado em: 19/07/2018
-
22. Síntesis y estudio de propiedades estructurales y magnéticas de ferritas Mg1-xZnxFe2O4 (x= 0-0,9)
ABSTRACT Nowadays, iron oxide based magnetic nanoparticles are used in several science and technology applications due to their magnetic properties. Likewise, these materials are used in biomedical applications such as contrast agents for magnetic resonance imaging, magnetic hyperthermia, targeted drug delivery, etc. In this work, the synthesis and character
Matéria (Rio J.). Publicado em: 19/07/2018
-
23. On the Effect of Aluminum on the Microstructure and Mechanical Properties of CrN Coatings deposited by HiPIMS
Hard coatings are a suitable solution for increasing the lifetime of tools and components employed in different industrial applications. Coatings of transition metal nitrides have great use for tribological applications due to due to their unique mechanical properties. Although widely employed, current deposition methods such as cathodic arc evaporation prod
Mat. Res.. Publicado em: 12/04/2018
-
24. Titanium Coating with Hydroxyapatite and Chitosan Doped with Silver Nitrate
Biomaterials are effective alternatives for tissue substitution, including the bone tissue, since they do not pose risks of transmission of diseases or immune rejection. Nowadays, there is an interest in new materials capable of being associated with other substances which favor bone formation, especially natural biopolymers, in particular chitosan, which ma
Mat. Res.. Publicado em: 01/02/2018