Mechanical Resistance
Mostrando 1-12 de 875 artigos, teses e dissertações.
-
1. Mesh reinforcement in masonry mortar coatings: a systematic literature review
Abstract Mortar coatings have a major influence on a building’s aesthetics, valorization, and habitability, with significant effects on the mechanical behavior of masonry walls. Multiple types of meshes can be embedded in plaster to enhance both masonry and coating’s mechanical behavior, restrain crack formation, enhance the bonding between layers, and i
Cerâmica. Publicado em: 2023
-
2. SYNTHESIS OF TOLUENE DIISOCYANATE URETHANE PREPOLYMER USING CASTOR OIL AND EVALUATION OF MECHANICAL PROPERTIES
This research is the synthesis of urethane prepolymer cast elastomer which had been produced using toluene diisocyanate and castor oil to replace the synthetic polyol, from petroleum origin, and the evaluation of mechanical properties of the polyurethane. The focus was to replace polyol from petroleum to vegetable material looking for renewable resources. Th
Química Nova. Publicado em: 2022
-
3. Influence of the addition of niobium oxide on the properties of fused aluminum oxide used in abrasive tools
Abstract Fused alumina is a material used in the manufacturing of abrasive tools, due to its high fusion point, great hardness, and mechanical toughness. In this context, this study addressed the influence of niobium addition on the properties of fused alumina for abrasive applications. A comparison was also made between this oxide and the brown fused alumin
Cerâmica. Publicado em: 2022
-
4. Mullite macro-needles for reinforcement of refractory castables
Abstract Ceramic macro-needles incorporation as reinforcement in commercial refractory castable was studied. Ceramic macro-needles (Ø2x20 mm) were made from kaolinite clay and gibbsite to obtain mullite as the main crystalline phase. Specimens with the ceramic reinforcement were evaluated by compression after being treated at two temperatures (815 and 1400
Cerâmica. Publicado em: 2022
-
5. Gas permeability and compressive strength evaluation of porous Al2O3 supported membrane
Abstract The aim was to investigate the feasibility of using a device to characterize permeability in porous substrates with low gas flux. Al2O3 supports were prepared by dry pressing using 1 to 3 wt% of polyethylene glycol (PEG) as a pore-forming agent. The green body was partially sintered at 1300 ºC. CO2 gas was used to measure both the pressure loss and
Cerâmica. Publicado em: 2022
-
6. The influence of separately and combined bentonite and kaolinite as binders for pelletization of NaA zeolite from coal fly ash
Abstract Pelletization of zeolitic materials is required to facilitate their practical industrial and commercial applications. Zeolite-NaA was synthesized from fly ash by the fusion method and shaped into spherical granules. Bentonite, kaolinite, and a combination of bentonite with kaolinite were tested as binders with different contents from 5 to 10 wt%. Th
Cerâmica. Publicado em: 2022
-
7. Thermal characterization of soil-cement bricks using mining tailings
Abstract Soil-cement bricks are earth construction materials that have been gaining prominence due to their environmental advantages. The Brazilian Technical Standard NBR 8491 establishes physical and mechanical procedures to characterize these bricks. However, the thermal characterization is an important assessment, since it is related to the building’s t
REM - International Engineering Journal. Publicado em: 2022
-
8. Fracture resistance of pressed ZLS crowns versus pressed LD crowns under thermo-mechanical cycling
Resumo Este estudo teve como objetivo avaliar a resistência à fractura do silicato de lítio reforçado com zircônio todo o material cerâmico "Celtra Press" em comparação com um "IPS e-max Press" em condições orais simuladas. Quatorze coroas cerâmicas foram fabricadas em moldes epóxi que foram duplicados a partir de moldes principais de aço inoxid
Brazilian Dental Journal. Publicado em: 2022
-
9. Musculoskeletal effects of obesity and bariatric surgery – a narrative review
Abstract Obesity affects several areas of the human body, leading to increased morbidity and mortality and the likelihood of other diseases, such as type 2 diabetes mellitus, cardiovascular diseases and musculoskeletal disorders. These conditions predispose to bone fractures and sarcopenic obesity, defined by the presence of an obesity-associated decrease in
Archives of Endocrinology and Metabolism. Publicado em: 2022
-
10. Biocomponents Based on Hydroxiapatite: Influence of Sterilization on the Mechanical Resistance
Resumo Objetivo O objetivo deste estudo foi avaliar a influência da esterilização na resistência mecânica à compressão e flexão de biocomponentes à base de hidroxiapatita obtida a partir de osso bovino liofilizado e sua associação com quitosana. Métodos O osso bovino liofilizado foi processado em partículas de 100 μm e misturado à quitosana
Revista Brasileira de Ortopedia. Publicado em: 2022
-
11. High-barrier and antibacterial films based on PET/SiOx for food packaging applications
Abstract High-barrier and antibacterial materials have potential applications in the field of preservative packaging for fresh meat products. In this paper, UV irradiation and silane coupling agent (KH550) were used to modify the surface of SiOx coating on polyester (PET)/SiOx film to prepare the PET/SiOx/chitosan and PET/SiOx/chitosan-nano-ZnO composite fil
Food Sci. Technol. Publicado em: 2021-09
-
12. Soil stabilization with lime for erosion control in solar plants
Abstract The installation of solar parks requires extensive areas and results in soil erosion in many cases. One suitable solution is applying lime to improve soil characteristics, such as mechanical strength, stability, workability, durability, and internal and surface erosion resistance. This soil treatment is of particular importance when dealing with hyd
REM, Int. Eng. J.. Publicado em: 2021-09