Mechanical Properties Of Metals
Mostrando 25-36 de 52 artigos, teses e dissertações.
-
25. Solidification microstructures and mechanical and corrosion resistances of dilute Pb-Sn alloys / Microestrutura de solidificação e resistencias mecanicas e a corrosão de ligas Pb-Sn diluidas
Lead-acid batteries manufacturers have modified the manufacturing processes and the chemical composition of alloys used in battery grids in order to decrease their weight as well as to reduce the production costs, and to increase the battery life-time cycle and the corrosion-resistance. The morphological microstructures characterized by cellular and dendriti
Publicado em: 2009
-
26. Instrumented Charpy : analysis of the instrumentation and the effect of different metallurgical conditions of an ultra-high strength steel on the dynamic fracture toughness / Charpy instrumentado : analise da instrumentação e da influencia de condições metalurgicas de um aço de ultra-alta resistencia mecanica na tenacidade a fratura dinamica
The classical Charpy test is used since 1900 and it is possible to determine from it the global energy for deformation and fracturing the specimen and this energy is named toughness which is important for selection steels considering ductile-brittle transition temperature. The Instrumented Charpy test is very important because it produces more material param
Publicado em: 2009
-
27. IMPLEMENTAÇÃO DA TÉCNICA DE FOTOACÚSTICA DE CÉLULA ABERTA PARA OBTENÇÃO DA DIFUSIVIDADE TÉRMICA DE METAIS
The photo-acoustic technique has become a standard photo-thermal method for carrying out diverse studies on solids materials. Photo-thermal phenomena in solids results from a combination of thermal expansion, thermal diffusion, and thermo-elastic bending effects and can be obtained by c k . r a = where k is the thermal conductivity, r is the density, and c i
Publicado em: 2009
-
28. INFLUENCE OF SiO2 ON MECHANICAL PROPERTIES OF DGEBA / INFLUÊNCIA DO SIO2 NAS PROPRIEDADES MECÂNICAS DA DGEBA
In this study we used a different route, simple and economical: the dissolution of the SiO2 powder DGEBA with a hardener to base polymercaptan ( aradur 90 ). Analysis was performed micro hardness in different percentages of the concentration of SiO2. The hardness of multicomponent solid is approximately equal to the average hardness of the material compositi
Publicado em: 2009
-
29. Análise de falhas em instrumentais cirúrgicos metálicos / Failure analysis in metallic surgical instruments
Este trabalho foi desenvolvido juntamente com a equipe de enfermagem do HC da Unicamp. O principal objetivo foi avaliar os modos de falhas presentes em pinças hemostáticas retas e curvas de fabricação nacional, que já haviam sido utilizadas pelo Hospital das Clínicas da Unicamp e que falharam prematuramente durante o uso. Os parâmetros avaliados estã
Publicado em: 2009
-
30. Hygrotermal effects evaluation using the iosipescu shear test for glare laminates
Fiber-metal laminates (FML) composed of alternating layers of unidirectional fiber-reinforced plastic (FRP) laminae and aluminum-alloy sheets offer some superior mechanical properties, compared with either conventional laminates consisting of only FRP laminae or high-strength monolithic aluminum alloys. The environmental factors can limit the applications of
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2008-09
-
31. Chemical modifications in lignocellulosic fibers to obtain and use in biosensor array phenolic derivative of LCC and the biosorption of metals / Modificações químicas em fibras lignocelulósicas para obtenção e aplicação em biocompósitos de matriz fenólica derivada de LCC e na biossorção de metais
In this work, lignocellulosic fibers from two sources (sisal and banana pseudo stem) were used as reinforcing agents in the preparation of phenolic matrix composites derived from cashew nut shell liquid (CNSL) and as material to adsorb toxic metals (Pb+2, Ni+2, Cd+2, Zn+2 and Cu+2). Surface changes were induced in the sisal fibers by immersion in alkali solu
Publicado em: 2008
-
32. Análise do efeito do tempo da moagem de alta energia no tamanho de cristalito e microdeformação da rede cristalina do WC-Co
Hard metals are the composite developed in 1923 by Karl Schröter, with wide application because high hardness, wear resistance and toughness. It is compound by a brittle phase WC and a ductile phase Co. Mechanical properties of hardmetals are strongly dependent on the microstructure of the WCCo, and additionally affected by the microstructure of WC powders
Publicado em: 2008
-
33. Novas formulações de fluidos de corte: otimização, propriedades e recuperação do óleo usado
Cutting fluids are lubricants used in metal-mechanical industries. Their complex composition varies according to the type of operation carried out, also depending on the metals under treatment or investigation. Due to the high amount of mineral oil produced in Northeastern Brazil, we have detected the need to better use this class of material. In this work,
Publicado em: 2008
-
34. Influência do lodo de ETE na massa para fabricação de cerâmica vermelha
The WTP produce many kinds of residue on your treatment stages, but the sludge is the more problematic from the final disposition point view. The actual rate of residue production deriving from technological evolution and the crescent population needs prevents the subtle equilibrium generation between consumption and recycling/reuse, creating problems of pol
Publicado em: 2008
-
35. Age-hardening of Ti-35Nb-7Zr-5Ta alloy for orthopaedic implants
Bone injuries and failures often require the inception of implant biomaterial. Research in this field has received increasing attention recently. In particular, porous metals are attractive due to its unique physical, mechanical, and new bone tissue ingrowth properties. The aim of this work is to investigate age hardening behavior of Ti-35Nb-7Zr-5Ta alloy pr
Materials Research. Publicado em: 2007-09
-
36. Influência de cargas de talco nas propriedades microestruturais e mecânicas na matriz de carbetos de silício em compósitos de matriz cerâmica
Ceramic Matrix Composites (CMC) are the most recent materials in field composites. The main factors for the good acting of these materials are the choice: of the matrix material, of the reinforcement, of the processing and chemical composition. Ceramic materials possess elastic module very loud, low density, and can support temperatures very discharges, even
Publicado em: 2007