Mechanical Production
Mostrando 1-12 de 673 artigos, teses e dissertações.
-
1. Technological properties of a self-bloating clay and expanded-clay aggregate for the production of lightweight concrete
Abstract The global interest in an increasingly sustainable economy, with a reduction in the consumption of raw materials and energy, can be supported by the growth in the use of lightweight concrete (LC) produced with expanded-clay aggregates (EA). The main qualities of natural self-bloating clay for the production of EA were studied, analyzing the paramete
Cerâmica. Publicado em: 2023
-
2. Effects of plaster to water ratio on physical and mechanical properties of ceramic pieces produced by the slip casting process
Abstract In the slip casting process, the relationship between the amount of plaster and water used in the production of molds influences the production of ceramic materials, because the higher the water content in the mixture, the lower the mechanical strength of the mold and higher the water absorption rate. In order to evaluate the influence of the variat
Cerâmica. Publicado em: 2022
-
3. Mechanical Circulatory Assist Devices: Which Is the Best Device as Bridge to Heart Transplantation?
ABSTRACT Introduction: Heart transplantation is the recommended treatment method for patients with advanced heart failure that is refractory to clinical treatment. Due to the progressive severity of these patients and the impossibility of performing the transplant in a short term, there are mechanical circulatory assist devices that can offer necessary hemo
Brazilian Journal of Cardiovascular Surgery. Publicado em: 2022
-
4. Designing and fabrication of a low-cost dip-coater for rapid production of uniform thin films
In this work, a self-made dip-coater equipment was developed for the fabrication of thin films. The assembly of the apparatus was carried out using simple mechanical and electronic pieces, recycle parts, and spending an inexpensive budget suitably. The production, software design, and features of the device were focused on the sol-gel dip-coating method, whi
Química Nova. Publicado em: 2022
-
5. Capital, ideologia e uma história do mundo sob o prisma da desigualdade
The phytochemical reinvestigation from the heartwood of the extracts of Cordia glazioviana led to the isolation of four still undescribed hydroquinones derivatives designated as cordiaquinol D (1), cordiaquinol E (2), (10R)-10,11-dihydrofuran-1,4-dihydroxy-globiferin (3) and 2-[(1’E,6’E)-3’,8’- dihydroxy-3’,7’-dimethylocta-1’,6’-dienyl]-benze
Econ. soc.. Publicado em: 2021-07
-
6. Anti-Inflammatory Meroterpenoids of Cordia glazioviana (Boraginaceae)
The phytochemical reinvestigation from the heartwood of the extracts of Cordia glazioviana led to the isolation of four still undescribed hydroquinones derivatives designated as cordiaquinol D (1), cordiaquinol E (2), (10R)-10,11-dihydrofuran-1,4-dihydroxy-globiferin (3) and 2-[(1’E,6’E)-3’,8’- dihydroxy-3’,7’-dimethylocta-1’,6’-dienyl]-benze
J. Braz. Chem. Soc.. Publicado em: 2021-07
-
7. Evaluation of the combined addition of aluminum lactate and calcium carbonate to alumina-based castables
Abstract Calcium aluminate cement (CAC) can induce the development of high green mechanical strength to refractory castables in a short period of time (24 h). However, the production of this hydraulic binder is energy-intensive and releases a large content of carbon dioxide (CO2), which adds to global warming. Thus, aiming to develop an alternative binding s
Cerâmica. Publicado em: 2021-06
-
8. CONTRIBUTION OF SOIL ATTRIBUTES AND MORPHOLOGICAL VARIABLES TO YIELD OF IRRIGATED GARLIC
ABSTRACT This study aimed to investigate relationships between the soil attributes that most affect garlic yield, which can be useful to choose a new area for the growing of this vegetable. We also aimed to study the effects of irrigation deficit at bulb formation stage (cloves) on final garlic quality and yield. The variables evaluated were garlic yield, ir
Eng. Agríc.. Publicado em: 2021-04
-
9. USE OF RESIDUES FROM THE CELLULOSE INDUSTRY AND SUGARCANE BAGASSE IN PARTICLEBOARDS
ABSTRACT The use of alternative materials such as lignocellulosic residues in the production of particleboards has increased considering that these residues are produced in large volumes and often do not have an appropriate destination. This research studied the use of residues from cellulose industries, sugarcane bagasse, and castor oil-based polyurethane r
Eng. Agríc.. Publicado em: 2021-02
-
10. Preparation of Poly(3-hydroxybutyrate-b-ε-caprolactone) by Reactive Extrusion and Production of Electrospun Fibrous Mats
Poly(3-hydroxybutyrate) (PHB) has been proposed to be a potential candidate to be used as biomaterial. However, its poor processability, high brittleness and rigidity have limited its applicability. Transesterification reactions with poly(ε-caprolactone) (PCL), one of the most promising biomedical materials, emerge as an attractive alternative to improve it
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
11. Montelukast Has no Impact on the Systemic Production of TGFβ-1 in Patients with Nasal Polyposis Associated with Aspirin Intolerance
Abstract Introduction Nasal polyposis is a disease characterized by a mechanical dysfunction of the nasal mucosa, closely related to the unique makeup of its extracellular matrix, which develops as the result of an anomalous tissue remodeling process. Transforming growth factor beta 1 (TGF-β1) is reduced not only in the nasal polypoid tissue, but also in
Int. Arch. Otorhinolaryngol.. Publicado em: 2021-01
-
12. The effect of extraction method and types of coagulants on the results and physicochemical properties of tofu
Abstract Extraction and coagulation techniques are essential stages in tofu production. This research studies the effect of extraction and coagulation techniques on physicochemical properties of soybean extract, soy pulp, and tofu. This study applies three extraction techniques, namely manual heat extraction, manual cold extraction, and cold extraction using
Food Sci. Technol. Publicado em: 2020-12