Machining Processes
Mostrando 13-24 de 46 artigos, teses e dissertações.
-
13. Analysis of tool wear, surface roughness and cutting power in the turning process of compact graphite irons with different titanium content
Due to its good mechanical properties, the Compacted (Vermicular) graphite cast iron (CGI) has found a lot of applications in the automobilistic field. One of the applications is the production of high power diesel engine blocks that, due to the higher strength compared to the usual gray cast iron, allows the increase of the pressure inside the cylinder and,
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2010-09
-
14. Improvement of the productivity in getting holes in aviation aluminum alloys with high speed tools / Melhoria da produtividade na obtenção de furos em liga de aluminio aeronautico com ferramentas de aço rapido
The purpose of this study is to optimize the manufacturing process of holes made by Company X in one of their products. Besides the optimization, should be maintained the dimensional quality by controlling the diameter, roundness, circularity, and surface finish of cylindrical holes obtained by the widening process, with high-speed steel reamers in a aluminu
Publicado em: 2010
-
15. Desenvolvimento de método de avaliação de desempenho de processos de manufatura considerando parâmetros de sustentabilidade / Development of a method for manufacturing processes assessment considering sustainability parameters
As empresas não mais podem pensar em desenvolvimento econômico sem a paralela preservação do meio-ambiente e do benefício mútuo da sociedade. É importante que as condições econômicas e sociais sejam melhoradas ao longo do tempo, sem exceder a capacidade de suporte do planeta. As indústrias podem contribuir para melhorar esse cenário aplicando uma
Publicado em: 2010
-
16. Estudo dos esforços de corte no processo HSM aplicado à abertura de cavidades / Study of the cutting forces in HSM process applied to pocket milling
The manufacturing of a great number of components in the industry depends on molds and dies used in processes like forging, powder metallurgy, deep drawing, casting and plastic injection. One of the main operations for manufacturing of these parts corresponds to the opening of the initial pocket, from which more complex geometries are machined in order to ob
Publicado em: 2010
-
17. Application of the Minimum Quantity Lubrication (MQL) technique in the plunge cylindrical grinding operation
Precision cylindrical grinding is used extensively in the manufacture of precision components in the metal-mechanical industry in general. Modern CNC grinding machines have improved this process with respect to the positioning and rigidity of the machine-workpiece-tool system, allowing the production of high precision parts with low dimensional tolerances. B
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2009-03
-
18. Desenvolvimento de um programa computacional para a integraÃÃo de dados de projeto, fabricaÃÃo e mediÃÃo de peÃas torneadas com Ãnfase na sÃntese de tolerÃncias dimensionais determinÃsticas
The objective of this work was to develop a computer program called Manufacturing Management System â SGF developed with the Excel language. This software integrates three stages: design, manufacturing by machining and measurement. So, itâs divided in three different and independent modules: design, manufacturing and measurement. In the design module is pr
Publicado em: 2009
-
19. A contribution to the study on cold forging of steel helical gears / Uma contribuição ao estudo do forjamento a frio de engrenagens helicoidais
The forging processes are classified in hot forging, warm forging, and cold forging, that usually provide products that need some further machining operations to achieve manufactured part specifications. Cold forging asks for a special attention when manufacturing complex geometry parts, because its limitation with the forgeability of the workpiece material,
Publicado em: 2009
-
20. Investigação sobr o uso da texturização a laser na preparação da superficie a ser recoberta em ferramentas de metal duro para fresamento / Research on the use of laser texturing for the surface preparation of to be coated carbide milling tools
Machining is one of the fundamental manufacturing processes of contemporary industry and coated cemented carbide is the most used cutting tool material. Manufacturing of this kind of tools includes the substrate surface processing previously to coating deposition in order to achieve high adhesion resistance in the substrate-coating interface. The most spread
Publicado em: 2009
-
21. The use of vegetal-based dielectric fluids in die-sink EDM processes / Utilização de fluidos dielétricos à base de óleos vegetais na usinagem por descargas elétricas por penetração
Dielectric fluids usually used in electrical discharge machining (EDM) are generally expensive, toxic and demand special storage and disposal procedures. Oil-based dielectric fluids pollute the environment and are subject to the price variations of the international market. Moreover, they are used in large quantities and discarded after short periods of time
Publicado em: 2008
-
22. Avaliação e critérios de eficiência nos processos de tratamento de fluido de corte por eletroflotação / Evaluation criteri and efficiency in the procedures for treatment of fluid cutting by eletroflotation
In the machining process cutting fluids are used to facilitate the manufacture of metal parts, which has resulted in problems of various orders, ranging from the generation of harmful effects on the desktop to the aggression of the environment with their improper disposal. The cutting fluids are composed of oils and minerals, synthetic solutions and water, c
Publicado em: 2008
-
23. Influence of emulsifier content on properties and durability of cutting fluids
The use of cutting fluids is well recognized for several years. To cater the needs of state- of- art machining processes, several fluid formulations are available in the present day market. Of such available fluids, water-soluble fluids are dominant. Though, the need of cutting fluids is explored, the functionality of different ingredients of the fluid is no
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2007-12
-
24. Studies on the cooling minimum quantity and conventional cooling at hardened steels in grinding process
The purpose of this work is to explain the concept of cutting fluids reasonable usage through the fluid minimum quantity in grinding processes. On that purpose, the development of a new nozzle and an own and adequate methodology should be required in order to obtain good results and compare them to the conventional methods. The analysis of the grinding wheel
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2007-06