Machining Processes
Mostrando 1-12 de 46 artigos, teses e dissertações.
-
1. Towards Qualification of Friction Stir Welding to AA5083-O and AA5052-O Aluminum Alloys
Friction Stir Welding (FSW) is an excellent alternative for joining dissimilar and similar materials in comparison to conventional welding processes. In this sense, this work aims at qualifying FSW to similar AA5083-O and AA5052-O aluminum alloys, with 6.35 mm thickness, in a CNC machining center. Therefore, four welding experiments were undertaken. At first
Mat. Res.. Publicado em: 13/01/2020
-
2. Estudio de los parámetros de proceso del anodizado por plasma químico en Ti-6Al-4V ELI para implantes dentales
ABSTRACT In order to study the variation effect of some parameters of micro-arc oxidation process (MAO) on Ti-6Al-4V samples for dental implants, several treatments were carried out under different conditions of current density, exposure time and electrolyte chemical composition. These processes resulted in generated bioactive titanium oxide surface coatings
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Evaluation of the oil flow using the MQL technique applied in the cylindrical plunge grinding of AISI 4340 steel with cbn grinding wheel
Abstract The grinding process is defined as an abrasive cutting action of a tool known as grinding wheel, which is submitted to high rotations, promoting excellent finishing and accuracy in dimensions, respecting the parameters established in each project. During the machining, the cutting edges of the abrasive grains undergo wearing and this increases the c
REM, Int. Eng. J.. Publicado em: 2018-07
-
4. Surface Integrity Analysis in Machining of Hardened AISI 4140 Steel
This study aimed to analyze the residual stresses and roughness in finishing milling of AISI 4140 steel, quenched and tempered up to hardness of 58 HRC. Machining operations were performed with the use of CBN inserts and by varying three basic cutting parameters (cutting speed, feed per tooth and cutting depth). Hardened materials are typically machined by a
Mat. Res.. Publicado em: 23/01/2017
-
5. Development and Test of an Equipment to Measure Residual Strain Inside Pipes Using the Hole-Drilling Method
Abstract Residual stresses are present in materials or structural component in the absence of external loads or changes in temperatures. The most common causes of residual stresses being present are the manufacturing or assembling processes. All manufacturing processes, such as casting, welding, machining, moulding, heat treatment, etc, introduces residual s
Lat. Am. j. solids struct.. Publicado em: 2016-12
-
6. Utilization of minimum quantity lubrication (MQL) with water in CBN grinding of steel
The use of cutting fluids is fundamental to machining processes, mainly when it comes to high heat generation, which is the case of grinding. Thus, lubrication and cooling provided by cutting fluids improve the final quality of the workpiece. However, cutting fluid usage provide some drawbacks concerning environmental, costs and health issues. Therefore, new
Mat. Res.. Publicado em: 08/10/2013
-
7. Estudo de ciclo de vida de uma planta de motores : Discussão sobre a tomada de decisão de um projeto de uma nova linha de manufatura / Engine plant lifecycle study : Discussions about decision making of a new manufacturing line design
Due to current competitiveness growing of the automotive market and the revision of pollutant emission standards by regulatory authorities, the product development scenario for automotive industry and industrial operations planning at large scale companies have undergone numerous revisions subsequently affecting one way or another every link in the supply ch
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 19/07/2011
-
8. Estudo comparativo de diferentes geometrias de corte em broca de metal duro com canal reto em ferro fundido cinzento / Comparative study of different geometries cut with carbide drill straight flute in grey cast iron
O objetivo deste trabalho é comparar o desempenho de duas diferentes geometrias de brocas de metal duro sem cobertura, com canal reto e refrigeração interna, na furação de ferro fundido cinzento. As geometrias avaliadas nos experimentos foram a geometria de ponta normalizada (normal) e uma geometria desenvolvida chamada de geometria de ponta esférica.
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 17/06/2011
-
9. Desempenho de Ferramentas Reafiadas - Furação
The present work evaluated the performance of step drills, new and after regrinding. The way of regrinding the drills after they reached the end of tool life criterion was also varied. The following variables were also considered: type of coatings (uncoated, TiAlN e AlCrN) and the routine of re-coating them after regrinding (no recoating, recoating over the
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/05/2011
-
10. Estudo teórico da condução de calor e desenvolvimento de um sistema para a avaliação de fluidos de corte em usinagem / Theoretical study of heat conduction and development of a system for evaluation of cutting fluids in machining
Due to the rapid growth and development of machining processes there has been a demand for environmental sustainability and news cutting fluids have been applied. A reliable assessment of their efficiency in cooling the workpiece, tools and improving productivity is still a requirement. The present thesis presents a theoretical study and a proposal of a syst
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/03/2011
-
11. Influence of optimized lubrication-cooling and minimum quantity lubrication on the cutting forces, on the geometric quality of the surfaces and on the micro-structural integrity of hardened steel parts
The is paper presents an analysis of the influence of minimum quantity lubrication (MQL), optimized and conventional cooling, using different cutting fluid volumes and flow rates, on the surface quality and integrity of hardened steel workpieces, in cylindrical plunge grinding with superabrasive CBN grinding wheels. The final quality of the workpieces were e
Matéria (Rio de Janeiro). Publicado em: 2011
-
12. Aspects on the optimization of die-sinking EDM of tungsten carbide-cobalt
At present, due to their properties, the tungsten carbide-cobalt (WC-Co) composite materials are in huge demand by industry to manufacture special tools, dies/molds and components under erosion. The powder metallurgy is the usual process applied to obtain WC-Co products, but in some cases this process is unable to produce tools of very complex shapes and hig
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2010-12