M35 Steel
Mostrando 1-12 de 48 artigos, teses e dissertações.
-
1. Numerical analysis of soft soil improved with stone column technique
Abstract The present research aims to do a numerical study on the behavior of a test embankment reinforced with stone column spacing of 1.85 m in a square grid with an average diameter of 1.0 m and 11.35 m length. The case study investigated the work in a steel company (ThyssenKrupp), located in Santa Cruz, western region of Rio de Janeiro - Brazil, where a
REM, Int. Eng. J.. Publicado em: 2021-09
-
2. Study of the influence of compressive strength concrete on columns during the design of a multi-floor building
Resumo Este trabalho tem como objetivo analisar a influência da resistência à compressão do concreto em pilares no dimensionamento de um edifício de múltiplos pavimentos, utilizando a ferramenta computacional CAD/TQS. As resistências dos pilares foram variadas em uma razão de 5 MPa, de 35 MPa até 90 MPa, sendo que os demais elementos estruturais per
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
3. ESTERIFICATION OF OLEIC ACID IN A SEMI-BATCH BUBBLE REACTOR FOR BIODIESEL PRODUCTION
ABSTRACT A semi-batch bubble reactor has been developed to produce fatty acid ethyl ester (biodiesel) by acid-catalyzed esterification of oleic acid with superheated ethanol vapor. In this paper, the effects of reaction temperature (110, 130 and 150°C), ethanol volumetric flow rate (1.35, 2.50 and 3.65 mL/min) and vapor bubble size on the reactor performanc
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
4. Use of Inert Gases for the Preservation of Nuclear Blood Cells
Abstract The subject of the study was the stability of human white blood cell membranes subject to noble gases (xenon ad krypton, 0.6 mPa) clathrate cryoanabiosis (‒80°C). A unique portable stainless steel low pressure container with a compartment for flexible plastic container was designed to ensure that the cells are saturated with gases. The samples we
Braz. arch. biol. technol.. Publicado em: 13/06/2019
-
5. Uso de técnicas electroquímicas para determinar la resistencia a la corrosión localizada de un acero inoxidable súper dúplex UNS S-32760
ABSTRACT Super duplex stainless steel UNS S-32760 is one of the most commonly used alloys in several industrial applications, due to its high corrosion resistance. However, this characteristic is affected when the alloy is exposed to aggressive environments. In this work, the effect of temperature on the critical potential of super duplex stainless steel was
Matéria (Rio J.). Publicado em: 20/05/2019
-
6. Comparative Study on Catalytic Dehydration of Glycerol with Alcohols
A comparative study of glycerol dehydration with alcohols (methanol, ethanol, tert-butyl alcohol) over ion exchange resin Amberlyst-35 was performed. The effect of catalyst amounts (1-15 wt.% to glycerol), reaction temperature (50-100 ºC), reaction time (5-10 h), and the molar ratio of alcohols to glycerol (3:1-8:1) were carried out in 50 mL stainless steel
J. Braz. Chem. Soc.. Publicado em: 2019-04
-
7. Experimental analysis of load capacity in beams with steel fiber reinforcement on the compression face
Resumo A utilização de fibras de aço no concreto visa aumentar principalmente a tenacidade, em função da aderência das fibras à matriz cimentícia. Entretanto como existem diversas tipologias de fibras de aço, as principais diferenças estão no fator de forma (relação entre comprimento e diâmetro), na geometria das fibras, e, na caracterização
Rev. IBRACON Estrut. Mater.. Publicado em: 2019-02
-
8. Corrosion Behavior of Plasma Nitrided and Nitrocarburised Supermartensitic Stainless Steel
Supermartensitic stainles steels (SMSS's) are a new generation of martensitic steels that have been increasingly used in oil and gas applications due to their adequate corrosion resistance and mechanical properties. In the present study, SMSS specimens (UNS S41425) were solution heat treated and air cooled followed by plasma nitriding and nitrocarburising at
Mat. Res.. Publicado em: 12/03/2018
-
9. Influencia del Aporte Térmico Sobre la Microestructura en Recargues Duros Multicomponentes (Cr, Mo, W, Nb, C, B) Nanoestructurados Base Hierro
Abstract: Surfacing welding is an issue that was increasing in relevance in last years, related with a raising number of applications in several industries. Hardfacings of nanostructured multicomponent steel of recent creation, have a set of outstanding properties. Nevertheless, the information available related with its processing is still scarce. The aim o
Soldag. insp.. Publicado em: 09/10/2017
-
10. Redundancy Factors for the Seismic Design of Ductile Reinforced Concrete Chevron Braced Frames
Abstract In this paper the authors summarize the results of a study devoted to assess, using nonlinear static analyses, the impact of increasing the structural redundancy in ductile moment-resisting reinforced concrete concentric braced frames structures (RC-MRCBFs). Among the studied variables were the number of stories and the number of bays. Results obtai
Lat. Am. j. solids struct.. Publicado em: 2016-11
-
11. Effects of zirconia nanoparticles addition to experimental adhesives on radiopacity and microhardness
AIM: To evaluate the radiopacity and microhardness (KHN) of experimental dental adhesives (EX). The experimental adhesive resins of the present study were formulated based on the simplified adhesive system Ambar (FGM). METHODS: Five EX with different concentrations of zirconia nanoparticles [0(EX0), 15(EX15), 25(EX25), 30(EX30) e 50%(EX50)] were incorporated
Braz. J. Oral Sci.. Publicado em: 2013-12
-
12. Production of ultrafine zinc powder from wastes containing zinc by electrowinning in alkaline solution
Production of ultrafine zinc powder from industrial wastes by electrowinning in alkaline solution was studied. Stainless steel and magnesium electrodes were used as anode and cathode, respectively. Morphology, size distribution and composition of the Zn particles were characterized by Scanning Electron Microscopy, Laser Particle Size Analyzer, and Inductive
Braz. J. Chem. Eng.. Publicado em: 2013-12