Lightweight Concrete
Mostrando 1-12 de 24 artigos, teses e dissertações.
-
1. Technological properties of a self-bloating clay and expanded-clay aggregate for the production of lightweight concrete
Abstract The global interest in an increasingly sustainable economy, with a reduction in the consumption of raw materials and energy, can be supported by the growth in the use of lightweight concrete (LC) produced with expanded-clay aggregates (EA). The main qualities of natural self-bloating clay for the production of EA were studied, analyzing the paramete
Cerâmica. Publicado em: 2023
-
2. Study about concrete with recycled expanded polystyrene
Resumo O concreto leve obtido com adição de partículas de poliestireno expandido (EPS) é conhecido como concreto com EPS. Estudaram-se neste trabalho as propriedades de concretos com adição de EPS para uso em paredes estruturais. O EPS por ser um material produzido em larga escala e possuir baixa densidade, produz um grande volume de resíduos. Esses r
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
3. Lightweight high-strength concrete with the use of waste cenosphere as fine aggregate
RESUMO Cenosfera é um sub-produto da combustão do carvão que apresenta interessantes propriedades para ser usado na produção de materiais cimentícios, tais como estrutura oca, baixa densidade, baixa térmica condutividade e notável estabilidade térmica. Além disso, ela mostra reatividade pozolânica na cura térmica. Entretanto, o potencial da cenos
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Application of Support Vector Machine and Finite Element Method to predict the mechanical properties of concrete
Abstract Compressive strength and Young’s modulus are the main properties used in the design of concrete structures. They are responsible for the cost, safety and dimensioning of the structure, and are generally measured in expensive and time-demanding tests. This fact encourages researches for fast and cost-effective methods to investigate the concrete’
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
5. Effects of pre-wetting aggregate on the properties of mortars made with recycled concrete and lightweight aggregates
RESUMO Este artigo buscou verificar a substituição parcial do agregado natural, areia (NA) por agregado de concreto reciclado (RCA) ou agregado leve (LWA) em argamassas, sob a hipótese que agregados pré-molhados produziriam melhoras nas propriedades da argamassa. Para isso, avaliou-se as propriedades das argamassas no estado fresco, como massa específic
Matéria (Rio J.). Publicado em: 10/06/2019
-
6. Produção de agregado sintético de argila com reaproveitamento de resíduo de vidro
RESUMO É objetivo da construção civil, reduzir o peso das estruturas e consequentemente os custos com as fundações. A substituição de britas por agregados leves é a alternativa mais utilizada. No entanto, sobretudo no Brasil, só existe uma única fábrica de agregados leves localizada em São Paulo, sendo oportuna a pesquisa de matériasprimas para
Matéria (Rio J.). Publicado em: 20/05/2019
-
7. Experimental Investigation on Self-Compacting Self-Curing Concrete Incorporated with the Light Weight Aggregates
ABSTRACT Self-Compacting Concrete (SCC) flows around obstructions by its self-weight to fill entirely and self-consolidate (without any need for vibration), without any part of disconnection and chunking. The eradication of the need for consolidation leads to better quality concrete and substantial improvement of running conditions. The fresh state of SCC mi
Braz. arch. biol. technol.. Publicado em: 23/01/2017
-
8. Calcined Clay Lightweight Ceramics Made with Wood Sawdust and Sodium Silicate
This paper aims to study the influence of including wood sawdust and sodium silicate in the production process of calcined clay lightweight ceramics. In the production process first, a sample used by a company that produces ceramic products in Brazil was collected. The sample was analysed by techniques of liquidity (LL) and plasticity (LP) limits, particle s
Mat. Res.. Publicado em: 17/10/2016
-
9. Experimental Tests on Bending Behavior of Profiled Steel Sheeting Dry Board Composite Floor with Geopolymer Concrete Infill
Abstract Profiled Steel Sheet Dry Board (PSSDB) system is a lightweight composite structure comprises Profiled Steel Sheeting and Dry Board connected by self-drilling and self-tapping screws. This study introduced geopolymer concrete, an eco-friendly material without cement content as an infill material in the PSSDB floor system to highlight its effect onto
Lat. Am. j. solids struct.. Publicado em: 2016-02
-
10. Ductility of reinforced lightweight concrete beams and columns
This paper presents analytical and experimental results on ductility of reinforced lightweight concrete beams and columns in the form of moment curvature relationships, and compares the response with that of normal reinforced concrete members. The experimental part is limited to flexural tests on beams made of lightweight concrete. The latter is obtained wit
Lat. Am. j. solids struct.. Publicado em: 2014-12
-
11. Fracture behavior of polymeric fiber reinforced lightweight structural concrete
A study has been made of the effect of short randomly dispersed polypropylene fibers on the fracture behavior of lightweight structural concrete. Using unnotched and precracked beams subjected to bend loading, it was possible to determine the toughness factor TF and to estimate specific J integral parameters, namely J IC and J MAX corresponding to the onset
Mat. Res.. Publicado em: 2014-12
-
12. Waste steel wires modified structural lightweight concrete
Nowadays, the use of different waste fibers in concrete has started to increase rapidly due to some reasons such as economic savings and positive effects on the environment. In this study, waste steel wires taken from reinforcement and formwork which were previously utilized in construction projects, were employed in structural lightweight concrete (SLWC). T
Mat. Res.. Publicado em: 28/07/2014