Light Curing Devices
Mostrando 1-12 de 14 artigos, teses e dissertações.
-
1. Accuracy of Irradiance and Power of Light-Curing Units Measured With Handheld or Laboratory Grade Radiometers
Resumo Esse estudo mensurou e comparou a irradiância e a energia de quatro fotopolimerizadores comerciais (Elipar S10, Elipar DeepCure-S, Corded VALO e Bluephase Style) utilizando diferentes tipos de radiômetros. Os dispositivos utilizados para analisar os fotopolimerizadores foram classificados em portáteis analógicos (Henry Schein, Spring, Demetron 100
Braz. Dent. J.. Publicado em: 22/07/2019
-
2. Changes in irradiance and energy density in relation to different curing distances
The present study aimed to assess the influence of curing distance on the loss of irradiance and power density of four curing light devices. The behavior in terms of power density of four different dental curing devices was analyzed (Valo, Elipar 2, Radii-Cal, and Optilux-401) using three different distances of photopolymerization (0 mm, 4 mm, and 8 mm). All
Braz. oral res.. Publicado em: 2015
-
3. Surface energy and wettability of polymers light-cured by two different systems
OBJECTIVE: This study evaluated the surface energy and wettability of composite resins polymerized by different light-curing units to ascertain the good wetting of tooth surfaces to achieve adhesion. MATERIAL AND METHOD: Filtek Z350 (3M ESPE), Admira (VOCO) and Grandio (VOCO) resins were selected for the testing procedures. The resins were light cured using
Journal of Applied Oral Science. Publicado em: 2011-10
-
4. Evaluation of different LED light-curing devices for bonding metallic orthodontic brackets
O objetivo deste estudo foi avaliar a influência de diferentes aparelhos de luz tipo LED na colagem de bráquetes ortodônticos, através do teste de resistência ao cisalhamento e do Índice de Remanescente do Adesivo (IRA). Coroas de 60 incisivos bovinos receberam a colagem de bráquetes com compósito Transbond XT. A amostra foi dividida em 4 grupos (n=1
Brazilian Dental Journal. Publicado em: 2011
-
5. Effect of different light-curing devices and aging procedures on composite knoop microhardness
The aim of this study was to evaluate the effect of light-curing devices (Halogen/HAL, Light Emitting Diodes/LED, Argon Laser/LAS and Plasma Arc/PAC) and aging procedures (Mechanical Cycling/MC, Thermal Cycling/TC, Storage/S, MC+TC and MC+TC+S) on the micro-hardness of bottom/B and top/T surfaces of 2-mm-high composite resin cylinders. The Knoop microhardnes
Brazilian Oral Research. Publicado em: 2009-12
-
6. Influence of light curing exposure times and devices on the discoloration and on the physical-chemical and morphologic properties of different types of composite resins / Influencia das fontes e tempos de fotoativação sobre a pigmentação e propriedades fisico-quimica e morfologica de diferentes tipos de resina composta
The objective of the present study was to evaluate the effect of LCU and light curing time on the discoloration, degree of conversion (DC), microhardness (KHN) and surface roughness (Ra) of different types of composite resins. Specimens (2.0 mm of height; 5.0 mm of diameter) were fabricated from different types of composite resins (CR) [Nanofilled: Filtek Su
Publicado em: 2009
-
7. Polimerização via radical livre fotoiniciada de sistemas multicomponentes para utilização em dispositivos oftalmicos : aspectos opticos e mecanicos / Free radical polymerization photoinitiated of multicomponent systems for us e in ophthalmic devices : optical and mechanical aspects
The current market calls for materials presenting good optical properties which satisfy consumers and users in general and that can be easily handled and processed. Generally, a polymer must present good optical properties, impact resistance and hardness - all compatible in their use as ophthalmic lenses. For quite a long period of time, ophthalmic lenses ma
Publicado em: 2009
-
8. Avaliação do efeito da indução de polimerização com diferentes fontes de luz e dos meios de envelhecimento sobre a microdureza de cilindros de resina composta / Evaluation of the induction of polymerization effect with different light sources and aging procedures on resin composite microhardness
The aim of this study was to evaluate the effect of the light-curing devices (Halogen/HAL, Light Emitting Diodes/LED, Argon Laser/LAS and Plasma Arc/PAC) and aging procedures on the microhardness of bottom and top surfaces of resin composite cylinders with 4mm height, submitted to thermal and mechanical cycles, and one year storage. For this study 200 specim
Publicado em: 2007
-
9. Influência de diferentes fontes fotoativadoras na conversão de resinas compostas
This study evaluated the influence of different light sources on the conversion of different composite resins by Differential Scanning Calorimetry (DSC). Initially was determined the standard of the devices emission of light, one halogen light curing unit (Optilux 500 - Demetron/Kerr) and three generations of LEDs (LEC-470 I - MMOptics, Radii Plus - SDI and
Publicado em: 2007
-
10. Influencia do tipo de fonte fotoativadora e meios de envelhecimento sobre a natureza e integridade marginal de restaurações em resina composta / Influence of photo-curing devices and aging types on the hardness and marginal integrity of composite resin restorations
Atualmente no mercado, muitos são os aparelhos utilizados para fotoativação das restaurações em resina composta. Uma polimerização adequada é essencial para obtenção de restaurações com propriedades físico-mecânicas ideais e resistentes aos desafios encontrados no meio bucal. Os objetivos deste estudo foram avaliar a influência do tipo de font
Publicado em: 2007
-
11. Influence of photo-curing devices and aging types on the hardness and marginal integrity of composite resin restorations / Influencia do tipo de fonte fotoativadora e meios de envelhecimento sobre a natureza e integridade marginal de restaurações em resina composta
Atualmente no mercado, muitos são os aparelhos utilizados para fotoativação das restaurações em resina composta. Uma polimerização adequada é essencial para obtenção de restaurações com propriedades físico-mecânicas ideais e resistentes aos desafios encontrados no meio bucal. Os objetivos deste estudo foram avaliar a influência do tipo de font
Publicado em: 2007
-
12. EFEITO DA UNIDADE DE LUZ E DA PROFUNDIDADE DE POLIMERIZAÇÃO SOBRE A MICRODUREZA DE UM COMPÓSITO
The aim of this study was to evaluate the influence of light curing devices in the depth of cure of one composite, using Vickers microhardness test. Specimens were prepared using a microhybrid composite Filtek Z250 (3M ESPE). The resins were placed in a bulk increment in 2 and 3 mm thick teflon cylindric molds, and then polymerized with the time of 40 second
Publicado em: 2006