Iron Oxide
Mostrando 1-12 de 338 artigos, teses e dissertações.
-
1. Preparation and performance of magnetic zirconium-iron oxide nanoparticles loaded on palygorskite in the adsorption of phosphate from water
Magnetic zirconium-iron oxide nanoparticles loaded on palygorskite as a low-cost adsorbent was produced by one-step co precipitation technique and its properties for phosphate adsorption were overall investigated. The Brunauer Emmett Teller (BET) specific surface area analysis, scanning electron microscopy (SEM), thermo gravimetric analysis (TGA), Fourier tr
Química Nova. Publicado em: 2022
-
2. Designing and fabrication of a low-cost dip-coater for rapid production of uniform thin films
In this work, a self-made dip-coater equipment was developed for the fabrication of thin films. The assembly of the apparatus was carried out using simple mechanical and electronic pieces, recycle parts, and spending an inexpensive budget suitably. The production, software design, and features of the device were focused on the sol-gel dip-coating method, whi
Química Nova. Publicado em: 2022
-
3. Magnetic concentration route for recovering pellet feed fines stored in a mining dam
Abstract The greatest and noblest challenge of mining engineering for the present and the future of iron ore treatment could be considered as the pursuit of optimizing the use of mineral resources. The use of mining tailings, in the mineral sector itself, or in another industrial branch, meets the needs of circular economy as it increases the useful service
REM - International Engineering Journal. Publicado em: 2022
-
4. Microbial activity and studies on excavated megalithic micaceous potsherds from Peninsular India
Abstract The abundantly available mica flakes were added in raw materials to manufacture pottery in Central Peninsular India during the early Iron Age (700-300 BCE) for storage and glittering. The micaceous potsherds from the excavated megalithic site of Nagpur were studied for their composition, manufacturing techniques, microstructural features, microbial
Cerâmica. Publicado em: 2021-06
-
5. Influence of Mn2+ ions on depression of quartz and spessartine in gondite ore
Abstract Low-grade manganese ores that are composed of manganese oxides, wad, quartz, iron oxides, gibbsite, and especially of spessartine (Mn3Al2(SiO4)3) are known as gondite. Spessartine is a mineral with a high content of silica (SiO2) and alumina (Al2O3) that causes a decrease of the enrichment in manganese oxide concentrates by flotation, giving this o
REM, Int. Eng. J.. Publicado em: 2021-01
-
6. Zeolite-SPION Nanocomposite for Ammonium and Heavy Metals Removal from Wastewater
Minimizing the emission of industrial effluents and realizing the recovery/extraction of key elements such as the rare earths from low concentration solutions, or during water decontamination processes, are some of the biggest challenges of modern society. Accordingly, the preparation and characterization of a low cost recyclable and reusable superparamagnet
J. Braz. Chem. Soc.. Publicado em: 2020-11
-
7. New Magnetic Fe Oxide-Carbon Based Acid Catalyst Prepared from Bio-Oil for Esterification Reactions
In this work, bio-oil (an organic matrix rich in oxygen functionalities) was used to efficiently dissolve and disperse Fe3+ which upon thermal treatment produced a carbon containing dispersed and encapsulated Fe oxide magnetic nanoparticles. These materials were prepared by dissolution of 8, 16 and 24 wt.% Fe3+ salt in bio-oil followed by treatment at 400, 4
J. Braz. Chem. Soc.. Publicado em: 2020-08
-
8. Strontium Oxide Decorated Iron Oxide Activated Carbon Nanocomposite: A New Adsorbent for Removal of Nitrate from Well Water
In the present study, activated carbon was magnetized by iron oxide and modified by strontium based nanoparticles (FeAC@Sr) to introduce it as an efficient favorable adsorbent for the removal of nitrate ions from underground water. The decorated adsorbent was characterized in terms of size, structure, morphology and composition using scanning electron micros
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
9. Characterization of Brazilian Northeastern plastic clays
Resumo Argilas plásticas são uma das principais matérias-primas usadas em tecnologia cerâmica. No entanto, há uma escassez dessas argilas no mundo para o uso em tecnologia de porcelanas. O objetivo deste trabalho foi caracterizar argilas plásticas do nordeste brasileiro. Composições química e mineralógica, distribuição do tamanho de partículas,
Cerâmica. Publicado em: 14/11/2019
-
10. Influência do tipo e teor de pigmento no estado endurecido de ladrilhos hidráulicos
Resumo A aplicação de ladrilhos hidráulicos voltou a ser valorizada nos últimos anos em função de sua beleza e versatilidade. O ganho de resistência sem necessidade de queima é uma considerável vantagem, mas o tempo e o custo de produção e a manutenção em estoque são algumas desvantagexns observadas. Como são materiais que permanecem expostos
Cerâmica. Publicado em: 14/11/2019
-
11. Magneto-Responsive Hydrogels: Preparation, Characterization, Biotechnological and Environmental Applications
Hydrogels are hydrophilic three-dimensional networks able to hold large amount of water and hydrophilic molecules. Magneto-responsive hydrogels comprise of magnetic nanoparticles dispersed in polymeric networks that can be manipulated under external magnetic field. This review aims at (i) giving a brief overview on the evolution of hydrogels until the design
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
12. Iron oxide/titania composites for radar absorbing material (RAM) applications
Resumo Compósitos de óxido de ferro/titânia foram sintetizados pelo método de precipitação. A quantidade de óxido de ferro foi variada nos compósitos. Fase única (anatásio) foi obtida para a fração em massa de 0-20% e três fases (anatásio, magnetita e hematita) foram encontradas para as frações de 30% e 40% de óxido de ferro. O tamanho de cr
Cerâmica. Publicado em: 15/08/2019