Integrated Circuit
Mostrando 1-12 de 90 artigos, teses e dissertações.
-
1. Performance analysis of the beneficiation process of bauxite from the Juruti Mine. Industrial sampling and performance evaluation
Abstract Sampling campaigns were conducted at the industrial bauxite wash circuit of the Juruti Bauxite Mine in Pará, Brazil. The beneficiation circuit consisted of crushing, scrubber washing, wet screening, hydrocyclone classification, and fltration. Considering laboratory processing of samples and statistical analyses of historical operation databases, ma
REM - International Engineering Journal. Publicado em: 2022
-
2. A 2.4 GHz Coplanar Solar Cell Patch Antenna with a Semi-Analytical Evaluation of Temperature Effects
Abstract Solar cells integrated with antennas have aroused scientific interest as an attractive energy source alternative in low power devices for IoT and Wireless Sensor Network applications. Since the space for all components in the systems is scarce, different integration ideas have been proposed in this field. However, further analysis of the performance
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Omni-Directional Wideband Antenna Array with Solar Cells
Abstract Distributed sensor networks are becoming more and more widespread due to their substantial benefits to our daily lives. These sensors, in most cases, are distributed in nature and even may require mobility. This, in turn, implies omnidirectional collector units to collect the data from various sensors at arbitrary directions. This work summarizes th
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
4. Use of Arduino in the Development of a New and Fast Automated Online Preconcentration System Based on Double-Knotted Reactor for the Mn Determination in Tea Samples by Flame Atomic Absorption Spectrometry (F AAS)
In the present paper, an automated online preconcentration system based on the use of two knotted reactors (KR) was developed for Mn determination in tea samples by flame atomic absorption spectrometry (F AAS). The system automation was performed by using four solenoid valves to switch sample streams and reagents. Valves were driven electronically by an inte
J. Braz. Chem. Soc.. Publicado em: 2020-01
-
5. Co-Design of a GPS Antenna Low-Noise Amplifier Front-End Circuit
Abstract This paper presents a clear and fast design procedure for directly matched low noise active integrated microstrip antenna front end circuits. Initially, a theoretical analysis is given for the overall gain equivalence between traditional and directly matched antennas. Then, a detailed procedure is presented for the design and construction of a fully
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 11/11/2019
-
6. Microstrip Hybrid Coupler with a Wide Stop-Band Using Symmetric Structure for Wireless Applications
Abstract In this paper, a wide stop-band microstrip coupler is presented. The proposed structure consists of coupled lines and step impedance cells, which are integrated to operate at 2.82 GHz for wireless applications. This coupler is formed by a symmetric structure so that the locations of the output ports relative to input are quite similar. Accordingly,
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2018-03
-
7. A Novel Design of an H-shaped Microstrip Diplexer
Abstract In this paper, a new microstrip diplexer using modified H-shaped resonators with a compact size and high isolation is presented. This circuit is designed for the ISM band at 2.4 GHz and GPS at 1.575 GHz. The proposed diplexer is formed by connecting two band-pass filters designed by using the modified H-shaped resonator and tapped microstrip Input/o
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2017-12
-
8. Bioleaching of gold, copper and nickel from waste cellular phone PCBs and computer goldfinger motherboards by two
Aspergillus niger strainsIn an effort to develop alternate techniques to recover metals from waste electrical and electronic equipment (WEEE), this research evaluated the bioleaching efficiency of gold (Au), copper (Cu) and nickel (Ni) by two strains of
Aspergillus niger in the presence of gold-plated finger integrated circuits found in computer motherboards (GFIBraz. J. Microbiol.. Publicado em: 2015-09
-
9. Design and implementation of a Quarter Mode Substrate Integrated Waveguide (QMSIW) cavity filter
AbstractIn this paper, a novel Quarter Mode Substrate Integrated Waveguide (QMSIW) cavity filter is presented. A prototype at 5GHz for the proposed filter has been simulated using CST Microwave Studio, and fabricated using standard Printed Circuit Board (PCB) process. The fabricated filter has been measured using a Vector Network Analyzer (VNA). The measurem
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2015-06
-
10. Determining the Fixed Pattern Noise of a CMOS Sensor: Improving the Sensibility of Autonomous Star Trackers
ABSTRACT: Autonomous star trackers are optical-electronic devices used for attitude determination of artificial satellites, having as a reference for this computation the positions of stars. There is one autonomous star tracker in development at the Aerospace Electronics Division of the Brazilian National Institute for Space Research. The autonomous star tra
J. Aerosp. Technol. Manag.. Publicado em: 2013-06
-
11. Geração de b-splines via FPGA / B-spline generation via FPGA
The b-splines are used in CAD/CAM/CAE systems to represent and define complex curves and surfaces, being adopted by the main computer graphics standards due to features like compact mathematic representation, flexibility and affine transformations. In 3D acquisition systems and integrated CAM-CNC systems, the use of the b-spline in the geometric information
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/08/2012
-
12. Aging aware design techniques and CMOS gate degradation estimative / Técnicas de projeto considerando envelhecimento e estimativa da degradação em portas lógicas CMOS
O advento da utilização de circuitos integrados pela sociedade se deu por dois motivos. O primeiro consiste na miniaturização das dimensões dos dispositivos integrados. Essa miniaturização permitiu a construção de dispositivos menores, mais rápidos e que consomem menos frequência. O outro fator é a utilização da metodologia baseada em bibliotec
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012