Inorganic Particles
Mostrando 1-12 de 78 artigos, teses e dissertações.
-
1. Hybrid MAPbI3 Perovskite Growth Mechanism from Irregular Particles to Cuboid and Hopper-Type Morphologies
Methylammonium lead iodide (MAPbI3), used as light-harvesting layer in solar cell devices, has attracted great attention from scientific community due to its excellent photovoltaic performance. In this work, we have shown a comprehensive study on the hybrid organic-inorganic MAPbI3 perovskite growth mechanism from irregular small particles to cuboid shape fo
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Weathering Resistance of Waterborne Polyurethane Coatings Reinforced with Silica from Rice Husk Ash
Abstract: Waterborne polyurethanes (WPUs) are interesting materials for coatings when compared to solvent-based polyurethanes, once that reducing the concentration of volatile organic compounds that are harmful for human health and the environment. However, the WPU has low weathering resistance. In order to improve this behavior among others properties, ino
An. Acad. Bras. Ciênc.. Publicado em: 25/11/2019
-
3. Obtaining and characterizing dental hybrid composites with clay or silica nanoparticles and boron-aluminum-silicate glass microparticles
Abstract The aim of the present work was the obtaining and characterization of dental hybrid composites using nanoparticles (clay or silica) and boron-aluminum-silicate microparticles. We evaluated the dispersion of the nanofillers when changing their loading among 2.5%, 5%, 10% and 25% wt. Were tested, in the above quantities, four different types of nanofi
Polímeros. Publicado em: 27/06/2019
-
4. Preparation and Characterization of Clay-polymer Nanocomposite Having Covalently-bound poly(norbornenes) with Pendant Cholesterols
We have successfully prepared a clay-based polymer nanocomposite having grown cholesterol bearing poly(norbornene) brushes end-tethered from a naturally-occurring montmorillonite clay template. The synthesis of this hybrid material involved the treatment of the clay with first generation Grubbs catalyst, a ruthenium alkylidene, which induced a ring-opening m
Mat. Res.. Publicado em: 10/01/2019
-
5. Biodegradation of Poly (3-hydroxybutyrate) /Eggshellsystems
In this work, biocomposites of poly (3-hydroxybutyrate) (PHB) / calcium carbonate from Rhea Americana eggshells were prepared and the effects of the addition of the inorganic filler in the polymeric matrix were assessed. The residue (powder) of the eggshell calcined at 400 ºC or in natura was inserted into a PHB solution for preparation of films via casting
Mat. Res.. Publicado em: 21/05/2018
-
6. Use of Amphiphilic Composites based on Clay/Carbon Nanofibers as Fillers in UHMWPE
In this work, it is proposed a new strategy to improve the dispersion of inorganic fillers in polymeric matrices by producing surface carbon nanostructures. Clay/carbon nanofibers particles were prepared and used as fillers to improve the mechanical and thermal properties of ultra-high molecular weight polyethylene (UHMWPE). Thermogravimetry (TG), differenti
J. Braz. Chem. Soc.. Publicado em: 2018-02
-
7. The effect of silver nanoparticles on composite shear bond strength to dentin with different adhesion protocols
Abstract In Dentistry, restorative materials and oral bacteria are believed to be responsible for restoration failure. To make long-lasting restorations, antibacterial agents should be made. Inorganic nanoparticles and their nano composites are applied as good antibacterial agents. Objective The purpose of this study was to investigate the effect of silver
J. Appl. Oral Sci.. Publicado em: 2017-08
-
8. Influence of ZnO and TiO2 Particle Sizes in the Mechanical and Dielectric Properties of Vulcanized Rubber
The novelty of the present study relies on the straightforward sonication of ZnO and TiO2 and incorporation to a complex formulation of latex, with other several organic-inorganic additives that influences the cross-linking reactions. The new elastomer with particles carefully sonicated exhibit improved electrical and mechanical properties. Strong interactio
Mat. Res.. Publicado em: 22/06/2017
-
9. Synthesis of Submicrometer Calcium Carbonate Particles from Inorganic Salts Using Linear Polymers as Crystallization Modifiers
In this study, we report the synthesis of submicrometer calcium carbonate particles using the simplest approach of mixing solutions of calcium chloride and ammonium carbonate inorganic precursors in the presence of crystallization modifiers. Instead of the typical crystallization of CaCO3 into large calcite crystals with rhombohedral morphology, very small u
J. Braz. Chem. Soc.. Publicado em: 2017-04
-
10. Dispersion degree and zeta potential of hematite
Abstract The dispersion degree of the mineral particles in the pulp is especially relevant regarding the performance of the cationic reverse flotation of iron ores. The gangue minerals should remain dispersed while hematite particles should be selectively flocculated. The present study addressed determinations of dispersion degree and zeta potential of hemat
Rem: Rev. Esc. Minas. Publicado em: 2016-06
-
11. Sarcoidosis and chronic hepatitis C: treatment with prednisone and colchicine
Abstract Sarcoidosis is a disease which still has uncertain etiology. Possible environmental causes are cited in the literature, like organic and inorganic particles and infectious agents. Recent studies have demonstrated the occurrence of sarcoidosis in patients with chronic C hepatitis; however, this association remains without statistical or causal eviden
An. Bras. Dermatol.. Publicado em: 2016-04
-
12. Synthesis and applications of polystyrene-block-poly(N-vinyl-2-pyrrolidone) copolymers
Abstract This work describes the synthesis and applications of amphiphilic polystyrene-block-poly(N-vinyl-2-pyrrolidone) (PS-b-PVP) copolymers as a silver and silica nanoparticle surface modification agent. The synthesis of PS-b-PVP was carried out using controlled/living radical polymerization techniques. The synthesis of the block copolymers was confirmed
Polímeros. Publicado em: 15/03/2016